/
Slenderness Ratio Report for OCBF design per AISC 341-16 with ideCAD
Slenderness Ratio Report for OCBF design per AISC 341-16 with ideCAD
- nurgül Kaya
- oğuzcan hadim
- Kemalcan Struja (Unlicensed)
- Zeynep Aladağ
Owned by nurgül Kaya
How does ideCAD control the slenderness ratio according to AISC 341-16?
ideCAD Structural controls and reports brace slenderness ratio automatically.
The slenderness ratio control is done automatically by a steel frame with a moderate ductility level and reported on the steel brace member report.
, multiple selections available,
Related content
Slenderness Ratio Report for SCBF design per AISC 341-16 with ideCAD
Slenderness Ratio Report for SCBF design per AISC 341-16 with ideCAD
More like this
Brace Requirements for OCBF per AISC 341-16 with ideCAD
Brace Requirements for OCBF per AISC 341-16 with ideCAD
More like this
Ductility Control Report for SCBF design per AISC 341-16 with ideCAD
Ductility Control Report for SCBF design per AISC 341-16 with ideCAD
More like this
Width-to-Thickness Ratios for OCBF per AISC 341-16 with ideCAD
Width-to-Thickness Ratios for OCBF per AISC 341-16 with ideCAD
More like this
Brace Requirements for SCBF per AISC 341-16 with ideCAD
Brace Requirements for SCBF per AISC 341-16 with ideCAD
More like this
Width-to-Thickness Ratios Report for SCBF per AISC 341-16 with ideCAD
Width-to-Thickness Ratios Report for SCBF per AISC 341-16 with ideCAD
More like this