/
Materials and Reduction Factors per ACI 318-19 §19, §20, and §21

Materials and Reduction Factors per ACI 318-19 §19, §20, and §21

Owned by oğuzcan hadim
Last updated: Jul 31, 2024 by İsmail Hakki BESLER
1 min read

Materials

The design properties of the concrete material are to be selected under ACI Chapter 19.

The design properties of the reinforcement material are to be selected under ACI Chapter 20.

Strength Reduction Factors

The strength reduction factor used in the sectional design is determined according to ACI Chapter 21.

Download ideCAD for ACI 318-19

Get Started for FREE Structural Engineering Software

Next Topic

Concrete and Reinforcement Materials per ACI 318-19 with ideCAD

Related Topics

Related content

Strength Reduction Factors per ACI 318-19 with ideCAD
Strength Reduction Factors per ACI 318-19 with ideCAD
Architecture & Structural Engineering
More like this
Concrete and Reinforcement Materials per ACI 318-19 with ideCAD
Concrete and Reinforcement Materials per ACI 318-19 with ideCAD
Architecture & Structural Engineering
More like this
ACI 318-19 Reinforced Concrete Design for American Standard
ACI 318-19 Reinforced Concrete Design for American Standard
Architecture & Structural Engineering
Read with this
Materials and Reduction Factors.
Materials and Reduction Factors.
Architecture & Structural Engineering
More like this
Minimum Spacing of Reinforcement per ACI 318-19 with ideCAD
Minimum Spacing of Reinforcement per ACI 318-19 with ideCAD
Architecture & Structural Engineering
Read with this
Material Information
Material Information
Architecture & Structural Engineering
More like this