Design Units Tab

Length

Open

 For the length, one of the units m, cm, mm, yd, ft, in is selected.

Force

One of the units MN, kN, N, kgf, tf, kip, lbf is chosen for the force.

Mass

For mass, one of the units kg, t, kip, lb is selected.

Sections

For sections, one of the units m, cm, mm, yd, ft, in is selected.

Angle

For the angle, one of the units rad, deg, gra is selected.

Reinforcement

For reinforcement, one of the units m, cm, mm, yd, ft, in is selected.

Deformation

For deformation, one of the units m, cm, mm, yd, ft, in is selected.