/
Shearwall should be used for A12.
Shearwall should be used for A12.
- Hakan Şahin
- Zeynep Aladağ
Owned by Hakan Şahin
Last updated: Nov 22, 2022 by Zeynep Aladağ
The Complete Message:
Structural type A12 is selected in (in X / Y direction) direction. The A12 system should include a shearwall.
A12 structural system is defined as buildings where all earthquake effects are met with high ductility level bond beam (hollow) reinforced concrete walls.
However, the curtain is not defined in the project.
Possible solutions:
Curtains should be added in the desired direction in accordance with the A12 carrier system in the project .
If a curtain will not be used in the structure, in the Analysis Settings / TBDY 2018 Earthquake Code Wizard, A11 for High Ductility Level Systems and A31 for Systems with Limited Ductility Level can be selected.
Next Topic
, multiple selections available,
Related content
The shearwall thickness cannot be less than 250 mm.
The shearwall thickness cannot be less than 250 mm.
More like this
The shearwall thickness cannot be less than 200 mm.
The shearwall thickness cannot be less than 200 mm.
More like this
Shearwall thickness cannot be less than 1/20 of the floor height.
Shearwall thickness cannot be less than 1/20 of the floor height.
More like this
Systems with limited ductility level cannot be used for DTS 4a
Systems with limited ductility level cannot be used for DTS 4a
More like this
Sample Shearwall Design
Sample Shearwall Design
More like this
αi < 0.70
More like this