/
9.7.1.1 Dimensional Check of Cross-Sections Report

9.7.1.1 Dimensional Check of Cross-Sections Report

Owned by Kemalcan Struja (Unlicensed)
Last updated: Oct 25, 2022 by Zeynep Aladağ
1 min read

  • Cross-sections of steel columns, beams, and braces which are part of concentrically braced frame systems with moderate ductility level, are checked according to Table 9.3 and are included in the relevant reports.

Next Topic

9.7.2

Related Topics

Related content

9.7.3.1 Slenderness Ratio Report
9.7.3.1 Slenderness Ratio Report
Architecture & Structural Engineering
Read with this
9.6.1.1 Dimensional Check of Cross-Sections Report
9.6.1.1 Dimensional Check of Cross-Sections Report
Architecture & Structural Engineering
More like this
Seismic Design Category.
Seismic Design Category.
Architecture & Structural Engineering
Read with this
9.4.1.1 Dimensional Check of Cross-Sections Report
9.4.1.1 Dimensional Check of Cross-Sections Report
Architecture & Structural Engineering
More like this
ASCE 7-16 Seismic Wizard
ASCE 7-16 Seismic Wizard
Architecture & Structural Engineering
Read with this
9.3.1.1 Width-to-Thickness Ratios Report
9.3.1.1 Width-to-Thickness Ratios Report
Architecture & Structural Engineering
More like this