/
9.6.1.1 Dimensional Check of Cross-Sections Report
9.6.1.1 Dimensional Check of Cross-Sections Report
- Kemalcan Struja (Unlicensed)
- Zeynep Aladağ
Owned by Kemalcan Struja (Unlicensed)
Cross-sections of steel columns, beams and braces which are part of concentrically braced frame with high ductility level, are checked according to Table 9.3 and included in the relevant reports.
Next Topic
, multiple selections available,
Related content
9.7.1.1 Dimensional Check of Cross-Sections Report
9.7.1.1 Dimensional Check of Cross-Sections Report
More like this
9.4.1.1 Dimensional Check of Cross-Sections Report
9.4.1.1 Dimensional Check of Cross-Sections Report
More like this
9.3.1.1 Width-to-Thickness Ratios Report
9.3.1.1 Width-to-Thickness Ratios Report
More like this
Steel brace section dimensions do not conform to Width-to-Thickness Ratios.
Steel brace section dimensions do not conform to Width-to-Thickness Ratios.
More like this
Steel column section dimensions do not conform to Width-to-Thickness Ratios.
Steel column section dimensions do not conform to Width-to-Thickness Ratios.
More like this
9.6.1.1
More like this