/
The rib height does not meet the requirement in gear upholstery.
The rib height does not meet the requirement in gear upholstery.
- Hakan Şahin
- Zeynep Aladağ
Owned by Hakan Şahin
The Complete Message:
The tooth height does not meet the requirement in gear upholstery. (TS500 11.3.2)
Increase the tooth height of the solid and so-called ribbed (ribbed/waffle) flooring until the condition is met.
Select the ribbed/waffle laying.
Enter the properties.
In the Ribbed/Waffle tab, enter the value that satisfies the condition in the Thread Height (H) line and click the OK button.
, multiple selections available,
Related content
Rib offset of ribbed-waffle slabs cannot be more than 70cm (T.S. 500 11.3.2)
Rib offset of ribbed-waffle slabs cannot be more than 70cm (T.S. 500 11.3.2)
More like this
The slab thickness does not meet the requirement.
The slab thickness does not meet the requirement.
More like this
Slab thickness is insufficient
Slab thickness is insufficient
More like this
Rib width of ribbed-waffle slabs cannot be less than 10cm (T.S. 500 11.3.2)
Rib width of ribbed-waffle slabs cannot be less than 10cm (T.S. 500 11.3.2)
More like this
Single footing thickness cannot be less than 25 cm.
Single footing thickness cannot be less than 25 cm.
More like this
Foot height cannot be less than 200mm.
Foot height cannot be less than 200mm.
More like this