/
Selecting Ductility Level
Selecting Ductility Level
- nurgül Kaya
- Zeynep Aladağ
Owned by nurgül Kaya
Special ductility, intermediate and ordinary system choices have application limits. The program automatically checks these limits in the wizard within the framework of the items listed below and does not allow ordinary ductility level or intermediate when it is necessary.
Reinforced concrete and steel structural systems are divided into three classes as given in Table 12.2-1, which are structural systems with special ductility level, intermediate level and ordinary levels in terms of ductility level.
In this step, it is necessary to choose according to the ductility level to be applied.
, multiple selections available,
Related content
Ductility
More like this
Conditions Regarding Ductility Levels of Structural Systems
Conditions Regarding Ductility Levels of Structural Systems
More like this
15.5.2.2
More like this
Seismic Force-Resisting System Selection (4.3.2.1)
Seismic Force-Resisting System Selection (4.3.2.1)
More like this
Nominal Ductility Level and Mixed Ductility Level (4.3.4.1)
Nominal Ductility Level and Mixed Ductility Level (4.3.4.1)
More like this
Structural System Selection per ASCE 7-16 with ideCAD
Structural System Selection per ASCE 7-16 with ideCAD
More like this