Steel Stair Macro Settings

With the Steel Stair Macro Settings command, settings such as stair width, length, height, section selection are accessed.

Location of Steel Stair Macro Settings

It is available in the Steel Stair toolbar that appears on the screen after the steel stair macro command is run.

Steel Stair Settings

Specifications

Specifications

Length of the lower landing

The lower landing length is entered.

Upper landing length

Upper landing height is entered

Stair length

Stair length is entered.

Stair height

Stair height is entered.

Stair width

The stair width is entered.

First step

If checked, it adds a step adjacent to the landing at the starting point of the stair.

Last step

If checked, it adds a step adjacent to the landing at the ending point of the stair.

Step count

The number of stair steps is determined.

Elevation

It is the distance of the stair from the slab on the placed story.

Left side

Section selection is made by opening the left side beam settings of the stairs.

Right side

Section selection is made by opening the stair right side beam settings.

Step

Section selection is made by opening the stair step beam settings.


Next Topic

Related Topics