Editing Stair Settings

Stair setting are editing on the scaffolding stair settings. The stair settings are accessed from the stair tab of the scaffolding settings dialog.

Location of Stair Settings

Select the scaffolding for which you want to change the stair settings and click the right mouse button. Click Properties from the right-click menu that opens .

You can also access the scaffolding settings dialog by double-clicking on your scaffolding with the left mouse button.

Stair Settings

Specifications

Specifications

Dimensions

Since the partition length and height values ​​are based on the stair length and height, you can adjust the length of your stair flight by determining the lower and upper landing lengths.

Add stair

If marked, stairs are added to the stories.

First step

 

If marked, a step is added to the lower landing.

Last step

If marked, a step is added to the upper landing.

Step count

The number of stair steps is determined.

Elevation

The stair elevation is determined

Sections

Section selection is made by partition the beam settings carrying the stair.

Usage Steps

  • Enter the scaffolding settings dialog.

  • Enter the stairs tab.

  • Edit the stair settings.

  • Click the OK button to close the dialog.

  • Your scaffolding will change according to the changes you make.

Scaffolding view before changing stair settings

 


Scaffolding view after changing the landing lengths to 50 cm


Scaffolding view after the step count is 12

Scaffolding view after add stair unchecked



Next Topic