Editing Stair Coating Thicknesses
Stair coating thicknesses are adjusted by entering a value. The entered values are reflected in both the plan drawing and the 3D model of the stair.
Location of Stair Coating Thickness Settings
You can access the coating thickness settings from the construction tab in the stair settings or stair edit dialogs.
Specifications |
|---|
Step coating nose length  The nose length of the step coating is entered. If the nose is not desired, 0 is entered. |
Riser coating thickness  The thickness of the riser coating is entered. If coating is not desired, these values are entered as zero. |
Step coating thickness  It is the step coating thickness. If coating is not desired, these values are entered as zero. |
Example Stairs with Different Coating Thickness
When D1, D2 and D3 are 0 |
  |
When D1, D2 and D3 are 2 cm |
  |
When D1, D2 and D3 are 5 |
  |
When D1 is 0, D2 is 2 and D3 is 5 |
  |
Related Topics
https://idecad.atlassian.net/wiki/spaces/IKP/pages/1059815519
https://idecad.atlassian.net/wiki/spaces/IKP/pages/1059554210
https://idecad.atlassian.net/wiki/spaces/IKP/pages/2094006305
https://idecad.atlassian.net/wiki/spaces/IKP/pages/2090663977
https://idecad.atlassian.net/wiki/spaces/IKP/pages/2093973617