/
Systems with limited ductility level cannot be used for DTS 1a, 2a, 3a, 4a
Systems with limited ductility level cannot be used for DTS 1a, 2a, 3a, 4a
- Hakan Şahin
Owned by Hakan Şahin
Jan 04, 2024
1 min read
Analytics
Loading data...
The Complete Message:
In buildings classified as seismic design category (DTS) 1a, 2a, 3a, 4a, structural systems with ordinary ductility level could not be used.
In the article 4.3.4.1 (a) of TBDY 2018, it is stipulated that structural systems with limited ductility level cannot be used in buildings classified as DTS = 1a, DTS = 2a, DTS = 3a and DTS = 4a .
This building cannot be solved with limited ductility level.
Solution:
Make a high ductility level selection by using the Analysis Settings / Earthquake Code wizard.
, multiple selections available,
Related content
Systems with limited ductility level cannot be used for DTS 2a
Systems with limited ductility level cannot be used for DTS 2a
More like this
Systems with limited ductility level cannot be used for DTS 4a
Systems with limited ductility level cannot be used for DTS 4a
More like this
Systems with limited ductility level cannot be used for DTS 1a
Systems with limited ductility level cannot be used for DTS 1a
More like this
Systems with limited ductility level cannot be used for DTS 3a
Systems with limited ductility level cannot be used for DTS 3a
More like this
Nominal Ductility Level and Mixed Ductility Level (4.3.4.1)
Nominal Ductility Level and Mixed Ductility Level (4.3.4.1)
More like this
For DTS = 3, Mdev / Mo> = 0.75 must be provided.
For DTS = 3, Mdev / Mo> = 0.75 must be provided.
More like this