Custom logoCustom icon
Templates

Architecture & Structural Engineering

  • All content
  • Space settings
  • Decision log
    Decision log
     This trigger is hidden
Results will update as you type.
  • What Is Integrated Design for AEC
  • Building Information Modeling
  • Customize ideCAD
  • Get Started
  • Model the Design
  • Integrated Building Design
  • Visualization
  • Integrated Structural Engineering
  • Error Solution Guide
    • Application Limits and R Coefficient Controls
    • Displacement and Irregularity Controls
    • Earthquake Loads Affecting the Structure
    • Material and Section Controls
    • Slabs
    • Beams
      • Insufficient Reinforcement on Beam
      • Maximum Percentages in Beam Exceeded.
      • Beam shear safety is not satistied
      • Insufficient rebar development length of beam
      • Beam width cannot be more than total of beam height and column/shearwall width.
      • Beam width cannot be less than 250mm.
      • The beam height cannot be more than 3.5 times the beam width.
      • Column-beam shear safety condition is not provided.
      • Beam exceeds Nmax
      • Column reinforcement design rules are not satisfied for beam
      • Beam deflection limit exceeded
      • TS500 Balanced reinforcement ratio control not provided.
      • The beam height cannot be less than 300mm.
      • Beam height cannot be less than 3 times the slab thickness
      • Longitudinal rebar diameter cannot be used below Ø12 in beams.
      • Beam width cannot be less than 200mm.
      • Insufficient Reinforcement on Coupling Beam
      • Beam Capacity > 1
      • Steel beam PMM ratio not satisfied.
      • Steel beam deflection limit exceeded.
      • Steel beam shear strength not satisfied.
      • Lateral bracing check is not satisfied
      • Steel beam section dimensions do not conform to Width-to-Thickness Ratios.
      • Crane beam strength not satisfied.
      • Castellated beam strength not satisfied.
      • Composite beam strength not satisfied.
      • Composite castellated beam strength not satisfied.
    • Columns
    • Shearwalls
    • Strip Footings
    • Raft Foundations
    • Single Footings
    • Steel Purlins, Steel Ties and, Secondary Steel Beams
    • Steel Braces and Steel Trusses
    • Steel Connections.
    • Analysis Controls
  • Quantities and Reports
  • Details and Layout Design
  • Troubleshoot
  • Limitation of Liability