Beam width cannot be less than 200mm.

Owned by Hakan Şahin

Last updated: Mar 22, 2024 by Zeynep Aladağ

1 min read

The Complete Message:

Beam width cannot be less than 200mm. (TS500 7.3)

The following condition is given for its width in the TS500.

Solution:

Select solid and named beams and give the beam width at least 200 mm.

Select the beam, beams
Enter the properties.
In the general settings tab, increase the beam width and click the OK button.

Next Topic

Insufficient Reinforcement on Coupling Beam

Related Topics