Have You Tried This While Modeling Concrete Building?
While modeling concrete projects with ideCAD Structural, there are commands that make modeling easier. In addition, there are various possibilities for examining and evaluating the design results and making changes in the project after the analysis+design is done.
- When All Failures are Active
- Adding a Short/Head Shearwall
- Open the Elements Design Dialog
- Stories That Will Not Join The Building Height
- Selecting Multiple Lines in the Design Dialog
- Area of Steel Calculator
- Choosing an Environmental Exposure Class
- Mark as Secondary Axis
- Drawing of Shearwall Horizontal Body Steel Inside/Outside with Bend
- Naming for B420C or S420
- Period Check for Rigid Basement Assumption
- Filtering Design Input Information as a Color Palette
- Rebar Numbering Options
- Solid Model/Vertical Frame in Analysis Model
- Color and Hatch for Shearwall Head Regions
- Project Errors in the Report
- Design Beams With/Without Bend Up Bars
- Beams/Shearwalls Continuous if Angle is Less Than
- Preparing Geotechnic Report
- Unit Icons
- Reinforcement Chair Features
- Separate Index for Each Story
- Adding Load to Column, Beam and Shearwall
- Changing Concrete Calculation Line Geometry
- Reinforcement Calculator
Next Topic