/
Minimum Spacing of Reinforcement.

Minimum Spacing of Reinforcement.

Owned by İsmail Hakki BESLER
Last updated: Nov 03, 2022 by Zeynep Aladağ
1 min read

Minimum Spacing of Reinforcements is conctrolled automatically according to Codes.

İnternational Design Codes

ACI 318-19 : Minimum Spacing of Reinforcement per ACI 318-19 with ideCAD

TSC 2018 : https://idecad.atlassian.net/wiki/spaces/IKP/pages/1839400939

Notation in ACI 318-19

dagg = Nominal maximum size of coarse aggregate, in.
db = Nominal diameter of bar, wire, or prestressing strand, in.

Next Topic

Standard Hooks, Seismic Hooks, Crossties, and Minimum Inside Bend Diameters.

Related Topics

Related content

TSC Minimum Spacing of Reinforcement
TSC Minimum Spacing of Reinforcement
Architecture & Structural Engineering
More like this
Minimum Spacing of Reinforcement per ACI 318-19 with ideCAD
Minimum Spacing of Reinforcement per ACI 318-19 with ideCAD
Architecture & Structural Engineering
More like this
Transverse Reinforcement.
Transverse Reinforcement.
Architecture & Structural Engineering
More like this
Development of Reinforcement.
Development of Reinforcement.
Architecture & Structural Engineering
More like this
Reinforcement Detailing of Joints.
Reinforcement Detailing of Joints.
Architecture & Structural Engineering
More like this
Column Reinforcement Detailing.
Column Reinforcement Detailing.
Architecture & Structural Engineering
More like this