/
Two-Way Slab Reinforcement Detailing.

Two-Way Slab Reinforcement Detailing.

Owned by ฤฐsmail Hakki BESLER
Last updated: Nov 03, 2022 by Zeynep AladaฤŸ
1 min read

Maximum spacing of deformed longitudinal reinforcement is controlled automatically.

The minimum specified concrete cover for nonprestressed cast-in-place slabs is determined automatically according to Codes.

International Design Codes

ACI 318-19 : Two-Way Slab Reinforcement Detailing per ACI 318-19 with ideCAD (v12)

TSC 2018 : Punching Shear Stress at Critical Section (7.11.8)

Next Topic

Nonprestressed two-way joist systems (Waffle Slabs).

Related content

One-Way Slab Reinforcement Detailing.
One-Way Slab Reinforcement Detailing.
Architecture & Structural Engineering
More like this
Two-Way Slab Reinforcement Detailing per ACI 318-19 with ideCAD (v12)
Two-Way Slab Reinforcement Detailing per ACI 318-19 with ideCAD (v12)
Architecture & Structural Engineering
More like this
One-Way Slab Reinforcement Detailing per ACI 318-19 with ideCAD (v12)
One-Way Slab Reinforcement Detailing per ACI 318-19 with ideCAD (v12)
Architecture & Structural Engineering
More like this
Reinforcement Detailing.
Reinforcement Detailing.
Architecture & Structural Engineering
More like this
Two-Way Slab Reinforcement Limits.
Two-Way Slab Reinforcement Limits.
Architecture & Structural Engineering
More like this
Two-Way Slab Design per ACI 318-19 ยง8
Two-Way Slab Design per ACI 318-19 ยง8
Architecture & Structural Engineering
More like this