/
Longitudinal rebar diameter cannot be used below Ø12 in beams.
Longitudinal rebar diameter cannot be used below Ø12 in beams.
- Hakan Şahin
- Zeynep Aladağ
Owned by Hakan Şahin
This message is given with the element and story name at the beginning of the report
For example, K1, 1st floor, Longitudinal rebar diameter cannot be used below Ø12 in beams.
In TBDY article 7.4.2.2, the diameter of longitudinal rebars in beam shall not be less than 12 mm. You receive a warning because of this condition is not met.
Solution :
Use longitudinal rebars with a diameter of 12 mm or higher in the beams for which the error message is given.
Next Topic
, multiple selections available,
Related content
The smallest dimension of the columns cannot be smaller than 300 mm.
The smallest dimension of the columns cannot be smaller than 300 mm.
Read with this
Column longitudinal rebar diameter cannot be less than Ø14.
Column longitudinal rebar diameter cannot be less than Ø14.
More like this
Longitudinal rebar less than Ø14 cannot be used in shearwall head reinforcement area.
Longitudinal rebar less than Ø14 cannot be used in shearwall head reinforcement area.
More like this
Insufficient rebar development length of beam
Insufficient rebar development length of beam
More like this
Circular column longitudinal rebar count cannot be less than 6.
Circular column longitudinal rebar count cannot be less than 6.
More like this
Column reinforcement design rules are not satisfied for beam
Column reinforcement design rules are not satisfied for beam
More like this