/
Beam width cannot be less than 200mm.
Beam width cannot be less than 200mm.
- Hakan Şahin
- Zeynep Aladağ
Owned by Hakan Şahin
The Complete Message:
Beam width cannot be less than 200mm. (TS500 7.3)
The following condition is given for its width in the TS500.
Solution:
Select solid and named beams and give the beam width at least 200 mm.
Select the beam, beams
Enter the properties.
In the general settings tab, increase the beam width and click the OK button.
, multiple selections available,
Related content
The beam height cannot be less than 300mm.
The beam height cannot be less than 300mm.
More like this
Beam width cannot be less than 250mm.
Beam width cannot be less than 250mm.
More like this
The beam height cannot be more than 3.5 times the beam width.
The beam height cannot be more than 3.5 times the beam width.
More like this
Beam height cannot be less than 3 times the slab thickness
Beam height cannot be less than 3 times the slab thickness
More like this
Beam width cannot be more than total of beam height and column/shearwall width.
Beam width cannot be more than total of beam height and column/shearwall width.
More like this
Coupling beam dimensions cannot be less than 300 mm.
Coupling beam dimensions cannot be less than 300 mm.
More like this