/
Slab thickness is insufficient

Slab thickness is insufficient

If the TS 500 11.4.2 equation 11.1 is not met, this message is given for flooring.

Solution :

  • Increase the thickness of the floor given the name and floor sufficiently.

  1. Choose the flooring or tiles.

  2. Click on properties.

  3. In the General Settings tab, give enough thickness value to the Thickness line.

image-20240322-103345.png

Icons:

h = slab thickness

lsn = Short side trim clear opening

α s = The ratio of the sum of slab continuous edge lengths to the sum of the side lengths.

m = ratio of slab long side to short edge


Related content

The slab thickness does not meet the requirement.
The slab thickness does not meet the requirement.
More like this
Single footing thickness cannot be less than 25 cm.
Single footing thickness cannot be less than 25 cm.
More like this
Slab Stress Check is not Provided
Slab Stress Check is not Provided
More like this
Double reinforcement warns in slab. How can I solve it?
Double reinforcement warns in slab. How can I solve it?
More like this