Response Modification Coefficient (R)
- Hakan ลahin
- Zeynep Aladaฤ
- oฤuzcan hadim
The earthquake load reduction coefficient R a (T) is determined automatically by Equation 4.1a and 4.1b .
R and D coefficients in the equations are under user control.
R and D coefficients selected by the user in the analysis settings wizard and report results are checked automatically. R and D coefficients that do not comply with TBDY are not allowed.
ICONS
D = Resistance Excess Coefficient
I = Building Importance Factor
R = Structural System Behavior Coefficient
R a ( T ) = Seismic Load Reduction Coefficient depending on the predicted ductility capacity and period
T = Natural vibration period [s]
T B = Horizontal elastic design acceleration spectrum corner period [s]
4.2.1. Earthquake Load Reduction Coefficientย
4.2.1.1 - Within the framework of Design Based on Resistance , the definition of the predicted ductility capacity - strength demand relationship and the earthquake load coefficients determined accordingly are given in ANNEX 4A .
4.2.1.2 - According to the definition made in ANNEX 4A , the Earthquake Load Reduction Coefficient to be taken as basis in reducing linear elastic earthquake loads is defined as follows:
ย