/
Transfer of In-Plane Diaphragm Forces to Seismic-Force-Resisting Elements (4.5.6.5)
Transfer of In-Plane Diaphragm Forces to Seismic-Force-Resisting Elements (4.5.6.5)
- Hakan Şahin
- Zeynep Aladağ
- oğuzcan hadim
Owned by Hakan Şahin
In the analysis made with semi-rigid diaphragm acceptance, the control of transferring the in-plane forces to the vertical elements is done automatically.
It should be shown by calculations that the in-plane effects are safe to transfer to vertical bearing elements in floors analyzed with the acceptance of semi-rigid diaphragm.
See: Slabs with In-Plane compressive and Shear Stresses (7.11.3) Collector elements to Transfer Force Between Diaphram (Slab) and Shearwall
, multiple selections available,
Related content
Rigid, Semi-Rigid, and Flexible Diaphragm Types
Rigid, Semi-Rigid, and Flexible Diaphragm Types
More like this
Diaphragm Design of the Seismic-Force-Resisting System.
Diaphragm Design of the Seismic-Force-Resisting System.
More like this
Slab Modelling
Slab Modelling
More like this
Diaphragm Design of the Seismic-Force-Resisting System per ACI 318-19 with ideCAD (v12)
Diaphragm Design of the Seismic-Force-Resisting System per ACI 318-19 with ideCAD (v12)
More like this
Modeling Story Slabs.
Modeling Story Slabs.
More like this
Rigid Diaphragm Behavior
Rigid Diaphragm Behavior
More like this