Page Comparison

The list of commands available in the ideCAD Architectural package program is given below in alphabetical order (Base version: 11.02).

	Command	Location of command in ribbon menu or toolbar	Explanation
1	3D Block (Import)	Tools/Import-Export/Import	Imports 3D Block.
		ideCAD logo/Import
2	3D Block (Export)	Tools/Import-Export/Export	Exports 3D Block.
		ideCAD logo/Export
		ideCAD logo/Export
3	3D Railing Over Objects	Facade/Railing	Draws 3D railing over objects.
4	3D Railing	Facade/Railing	Draws 3D railing.
5	3D Text	Rendering/3D Geometric Objects	Draws 3d text.
6	3DS (Export)	Tools/Import-Export/Export	Exports to 3DS file format.
		ideCAD logo/Export
7	3DS (Import)	Tools/Import-Export/Import	Imports 3DS file format.
		ideCAD logo/Import
8	3P Workplane	View/Workplane/Target Workplane	Creates a workplane through 3 points.
	4 Bolts Stiffened End Plate Connection	Steel/Macro/Single Plate Connection	Creates a 4 bolts stiffened end plate
9	4 Bolts Unstiffened End Plate Connection	Steel/Macro/Single Plate Connection	Creates a 4 bolts unstiffened end plate connection.
10	8 Bolts Stiffened End Plate Connection	Steel/Macro/Single Plate Connection	Creates a 8 bolts stiffened end plate connection.
11	About ideCAD Architectural	ideCAD logo/Help	It gives the program version and usage license information.
12	Activate Local CS	Home/Snap	Uses defined local coordinate system.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
13	Add Custom Snap Points on Line	Right click menu in perspective view	Creates snap points on a line in a perspective image.
14	Add Entity	It is located in the trim to roof toolbar.	Adds new entities to the trim group.
15	Add Lines to Edges	It is located in the hatch toolbar.	Adds lines to the hatch edges.
16	Add Point	It is located in the hatch toolbar.	Add a new point to hatch.
17	Add Roof	It is located in the trim to roof toolbar.	Adds roof to the trim group.
18	Add Stair Area	Home/Concrete/Stair	Adds stair area to an existing stair.
		Concrete/Concrete/Stair
19	Add To Selection Group	Right click menu	Adds new objects to the groups
20	Add/Remove Dimension Parent	Modify/Entity Edit/Dimension	Adds/removes dimension parents.
21	Advanced Arrray	Home/Edit	Generates array of entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
22	Advanced Snap	Home/Snap	Enables advanced snap mode.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
23	Alias Editor	Settings/Menu Settings	Edits commands used on the command line.
24	Align Bottom	It is located in the align toolbar.	Aligns the selected entities at the bottom.
25	Align by Drawing a Path	It is located in the align toolbar.	Aligns the selected entities by drawing a path.
26	Align by Selecting an Edge of Entity	It is located in the align toolbar.	Align the selected entities by selecting an edge of entity.
27	Align Entities	Home/Modify	Aligns the selected entities.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
28	Align Left	It is located in the align toolbar.	Aligns the selected entities to the left.
29	Align Object Center	It is located in the align toolbar.	Aligns the selected entities to the object center.
30	Align Nearest Point	It is located in the align toolbar.	Aligns the selected entities to the nearest point.
31	Align Right	It is located in the align toolbar.	Aligns the selected entities to the right.
32	Align Top	It is located in the align toolbar.	Aligns the selected entities to the top.
33	Angle	Home/Reference	Measures the angle.
		Facade/Reference
		Concrete/Reference
		Steel/Reference
		Tools/Reference
		Drawings/Reference
34	Angle Dimension	Drawings/Dimension	Draws angle dimension.
35	Angle Dimension Settings	Drawings/Dimensions/Level Dimension	Opens angle dimension settings.
36	Angle Library Placement	It is located in the library toolbar.	Sets vertical angle of library automatically using underlying geometry.
37	Apex Type Connection	Steel/Macro/Single Plate Connection	Creates a apex type connection.
38	Arc (Center-Radius-Angles)	It is located in the primitives toolbar.	Draws arc.
39	Arc Axis	Home/Axis	Draws arc axis.
		Concrete/Axis
		Steel/Axis
40	Arc Axis Through 3Points	Home/Axis	Draws arc axis through 3 points.
		Concrete/Axis
		Steel/Axis
41	Arc Beam	Concrete/Concrete	Draws arc beam.
42	Arc Dome	Home/Roof/Dome	Draws arc dome.
43	Arc Dome 3P	Home/Roof/Dome	Draws arc dome through 3 points.
44	Arc Slab Edge	Concrete/Concrete/Slab Edge	Draws arc slab edge.
45	Arc Through 3 Points	It is located in the primitives toolbar.	Draws arc through 3 points.
46	Arc Wall	It is located in the wall toolbar.	Draws arc wall.
47	Arc Zone Edge	It is located in the zone edge toolbar.	Draws arc zone edge.
48	Area	Home/Reference	Calculates area.
		Facade/Reference
		Concrete/Reference
		Steel/Reference
		Tools/Reference
		Drawings/Reference
49	Array	Home/Edit	Generates an array of entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
50	Assign Material	Rendering/Render	Continously assigns selected material to face groups.
51	Auto Label Entities	Modify/Entity Edit	Auto label entities.
		Tools/Tools
52	Automatic Hatch	It is located in the hatch toolbar.	Creates hatch with closed polygons.
53	Axis	Home/Axis	Draws axis.
		Concrete/Axis
		Steel/Axis
54	Axis Border	Modify/Entity Edit/Move Axis Label	Sets the axis border.
55	Axis Offset	It is located in the axis toolbar.	Draws an axis with an offset to the previous axis drawn.
56	Axis Settings	Home/Axis/Axis	Opens axis settings.
		Concrete/Axis/Axis
		Steel/Axis/Axis
57	Axonometric	View/Perspective	Changes view to axonometric.
58	Back	View/Perspective	Changes view to back.
59	Background	View/View	Opens background settings.
60	Baseboard	It is located in the sweep toolbar.	Draws baseboard.
61	Beam	Concrete/Concrete	Draws multiple beams.
62	Beam Settings	Concrete/Concrete/Beam	Opens beam settings.
63	Beam To Shearwall	Modify/Transform	Converts beams to shearwalls.
64	Bends Curtain Wall	Facade/Exterior Facade/Curtain Wall	Bends curtain wall.
65	Bezier	Drawings/Primitives/NURBS	Draws bezier curve.
66	Bitmap Hatch	Drawings/Hatch	Draws bitmap hatch.
67	Bolted Flange Plate Connection	Steel/Macro/Single Plate Connection	Creates a bolted flange plate connection.
68	Border on Wall	It is located in the sweep toolbar.	Draws border on wall.
69	Border Vault	Home/Roof/Vault	Draws border vault.
70	Bottom	View/Perspective	Changes view to bottom.
71	Box	Home/Entities/3D Objects	Draws box.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
72	Box/Tube Cap Plate	Steel/Macro/Single Plate Connection	Creates box/tube cap plate.
73	Box/Tube End Plate Connection	Steel/Macro/Single Plate Connection	Creates a box/tube end plate connection.
74	Box/Tube Seating Connection	Steel/Macro/Single Plate Connection	Creates a box/tube seating connection.
75	Box/Tube Splice Connection	Steel/Macro/Single Plate Connection	Creates a box/tube splice connection.
76	Brace Center Connection	Steel/Macro/Single Plate Connection	Creates a brace center connection(9).
77	Brace Corner Connection	Steel/Macro/Single Plate Connection	Creates a brace corner connection(10).
78	Break	Home/Modify	Breaks off a certain part of the objects.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
79	Built-up Area & FAR Reports	Tools/BUA/FAR Reports	Creates GRZ/GFZ report.
80	Calculate Contour	Home/Axis/Axis	Calculates contour polygon.
		Concrete/Axis/Axis
		Steel/Axis/Axis
		Modify/Entity Edit/Move Axis Label
81	Camera	Rendering/Lights-Camera	Draws camera.
82	Camera Animation	Rendering/Render	Creates camera animaton.
83	Camera Path	Rendering/Render	Draws camera path.
84	Camera Settings	Rendering/Lights-Camera/Camera	Opens camera settings.
85	Cancel Secondary Stair Deformation	Modify/Entity Edit/Stair	Cancels secondary stair deformation.
86	Cancel Stair Deformation	Modify/Entity Edit/Stair	Cancels stair deformations.
87	Ceiling Cornice	It is located in the sweep toolbar.	Draws ceiling cornice.
88	Centered Column	It is located in the column toolbar.	Sets center aligned.
89	Centered Single Footing	It is located in the single footing toolbar.	Sets centered single footing.
90	Chamfer	Home/Modify	Connects two lines with a third line.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
91	Change Axis Draw Type	Home/Axis	Changes axis drawing type.
		Concrete/Axis
		Steel/Axis
92	Change Baluster Count	Home/Concrete/Stair	Changes baluster count.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
93	Change Column Dimension	Modify/Entity Edit/Column	Changes column dimensions.
94	Change Distance Point	It is located in the ODT door/window toolbar.	Change dio distance point.
95	Change Edge Part End Angles	Modify/Entity Edit/Sweep	Change edge part end angles.
96	Change Entity Layers	Modify/Layers	Changes layers of selected entities.
97	Change Jamb Side	It is located in the jamb toolbar.	Changes jamb placement to the other side of dio.
98	Change Layers	Right click menu in plan view.	Changes layers of selected entities.
99	Change Rafter Dimensions	Home/Roof/Roof	Changes rafter dimensions.
		Modify/Entity Edit/Roof
100	Change Roof Edge Properties	Home/Roof/Roof Details	Changes roof edge properties.
		Modify/Entity Edit/Roof
101	Change Shearwall Length	Home/Concrete/Shearwall	Changes shearwall length.
102	Changes Path Direction	It is located in the railing toolbar.	Changes path direction.
		It is located in the curtain wall toolbar.
103	Check for Updates	ideCAD logo/Help	Check for updates.
104	Check Geometry	Tools/Tools	Checks validity of project geometry.
105	Circle	Drawings/Primitives	Draws circle.
106	Circle Beam	Concrete/Concrete/Beam	Draws circle beam.
107	Circle Slab Edge	Concrete/Concrete Slab Edge	Draws circle slab edge.
108	Circle Wall	It is located in the wall toolbar.	Draws circle walls.
109	Circle Zone Edge	It is located in the zone edge toolbar.	Draws circle zone edge.
110	Circular Column	Home/Concrete/Column	Draws circular column.
		Concrete/Concrete
111	Clone	Home/Edit	Clones (immediately copies) objects.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
112	Close	ideCAD logo	Closes current project.
113	Closed Bezier	Drawings/Primitives/NURBS	Draws closed bezier curve.
114	Close Entity Layer	Right Click Menu	Closes the layer of the object.
115	Closed NURBS	Drawings/Primitives/NURBS	Draws closed NURBS curve.
116	Closed Polygon To Polygon Column	Modify/Transform/Beam to Shearwall	Transforms primitive entities to polygon column.
117	Closed Polygon To Polygon Section	Modify/Transform/Beam to Shearwall	Transforms primitive entities to polygon section.
118	Collar Beam	Home/Roof/Roof Details	Draws a collar beam.
119	Column	Home/Concrete	Draws rectangular column.
		Concrete/Concrete
120	Column Settings	Home/Concrete/Column	Opens column settings.
		Concrete/Concrete/Column
121	Column Support	Home/Concrete/Column	Draws column support.
		Concrete/Concrete
122	Column-Beam Stiffened End Plate	Steel/Macro/Single Plate Connection	Creates a column-beam stiffened end plate connection.
123	Column-Column Connection (Built Up Column)	Steel/Macro/Single Plate Connection	Creates a built up column connection.
124	Column-Column End Plate Splice	Steel/Macro/Single Plate Connection	Creates a column-column end plate splice connection.
125	Column-Foundation Connection (Stiffened Baseplate)	Steel/Macro/Single Plate Connection	Creates a column-foundation connection (Stiffened baseplate).
126	Components Report	Tools/Quantity Report	Creates components report.
127	Composite Materials	Settings/Element Materials	Constructs and arranges composite materials.
128	Composite Slab	Steel/Steel	Draws composite slab.
129	Composite Solid Slab	Steel/Steel/Composite Slab	Draws composite solid slab.
130	Concrete Slab	Steel/Steel/Composite Slab	Draws concrete slab over steel beams.
131	Cone-Pyramid	It is located in the tubes toolbar.	Draws cone-pyramid.
132	Contents	ideCAD logo/Help	Opens the program's help document.
133	Continuous Arc Beam	Concrete/Concrete	Draws continuous arc beams.
134	Continuous Arc Wall	Home/Wall	Draws continuous arc walls.
135	Continuous Beam Connection	Steel/Macro/Single Plate Connection	Creates a continuous beam connection.
136	Continuous Slab Edge	Concrete/Concrete/Slab Edge	Draws continuous slab edges.
137	Continuous Zone Edge	It is located in the zone edge toolbar.	Draws continuous zone edges.
138	Contour Lines	Home/Axis/Axis	Sets contours of the drawing.
		Concrete/Axis/Axis
		Steel/Axis/Axis
139	Copy	Home/Edit	Copies entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
135140	Copy Contour	Tools/Edit	Copies contours of a drawing.
136141	Copy To File	Tools/File Sharing	Copies entities to a .blk file.
137142	Cordon	Facade/3D Geometric Objects	Draws cordon.
138143	Cordon Settings	Facade/3D Geometric Objects/Cordon	Opens cordon settings.
139144	Corner Aligned Column	It is located in the column toolbar.	Sets corner aligned column.
140145	Corner Aligned Single Footing	It is located in the single footing toolbar.	Sets corner aligned single footing.
141146	Crane	Steel/Macro	Draws crane.
142147	Crane Connection	Steel/Macro/Single Plate Connection	Creates a crane connection.
143148	Create Camera	Right click menu in the perspective view	Creates camera.
144149	Create Clip Plane	View/Workplane	Creates a clip plane.
145150	Create New Layout	Drawings/Layout Design	Creates a new layout window.
146151	Create New Selection Group	Right click menu	Creates new selection groups.
147152	Create New Stair	Home/Concrete/Stair	Creates a new stair.
		Concrete/Concrete/Stair
148153	Create User Defined Hatch	It is located in the hatch toolbar.	Creates user defined hatch from block objects.
149154	Curtain Wall	Facade/Exterior Facade	Draws curtain wall.
150155	Curtain Wall Dio	Facade/Exterior Facade/Curtain Wall	Draws curtain wall dio.
151156	Curtain Wall Settings	Facade/Exterior Facade/Curtain Wall	Opens curtain wall settings.
152157	Curve Beam	Concrete/Concrete	Draws curve beam.
153158	Curve Slab Edge	Concrete/Concrete/Slab Edge	Draws curve slab edge.
154159	Curve Wall	Home/Wall	Draws curve wall.
155160	Curve Zone Edge	It is located in the zone edge toolbar.	Draws curve zone edge.
156161	Curve To Beam	Modify/Transform/Beam to Shearwall	Converts circle, arc, ellipse objects to beam.
157162	Curve To Shearwall	Modify/Transform/Beam to Shearwall	Converts circle, arc, ellipse objects to shearwall.
163	Curve to Wall	Modify/Transform/Beam to Shearwall	Converts circle, arc, ellipse objects to wall.
225164	Customize	Right-click on any point of the vertical toolbar	Customize the vertical toolbar and the customizable toolbar on the top edge.
158165	Cylinder	It is located in the tubes toolbar.	Draws cylinder.
159166	DIN277 Report	Tools/Quantity Report	Creates DIN277 report.
160167	DWG/DXF	Tools/Import-Export/Import	Imports DWG DXF file formats.
161168	DWG/DXF/DWF	Tools/Import-Export/Export	Exports to DWG DXF DWF file formats.
162169	DWG/DXF/DWF single	Tools/Import-Export/Export	Exports to DWG DXF DWF file formats.
163170	Default Aligned Column	It is located in the column toolbar.	Sets default aligned.
164171	Default Single Footing	It is located in the single footing toolbar.	Sets default single footing.
165172	Define CS Origin	Home/Snap	Defines temporary coordinate system origin.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
166173	Define End Cut To Edge	Modify/Entity Edit/Sweep	Defines end cut to edge.
167174	Define Inner Cut To Edge	Modify/Entity Edit/Sweep	Defines inner cut to edge.
168175	Define Local Offset To Edge	Modify/Entity Edit/Sweep	Defines local offset to edge.
169176	Define Offset To Edge	Modify/Entity Edit/Sweep	Defines offset to edge.
170177	Deform Stair	Home/Concrete/Stair	Deforms stair.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
171178	Delete	Home/Edit	Delete entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
179	Delete Group	It is located in the trim to roof toolbar.	Deletes trim group.
172180	Delete Horizontal Plan Section	It is located in the horizontal plan section toolbar.	Deletes horizonal plan section.
173181	Delete Old Entities on Mirror	It is located in the mirror toolbar.	Delete old entities on mirror.
174182	Delete Primitives	It is located in the pool toolbar.	Delete primitives after pool creation.
175183	Delete Roof Element	Home/Roof/Roof Details	Deletes roof element(s).
		Modify/Entity Edit/Roof
176184	Delete Slab Hole	It is located in the slab for steels toolbar.	Deletes slab hole.
177185	Delta	It is located in the wall toolbar.	Changes delta value.
		It is located in the beam toolbar.
		It is located in the shearwall toolbar.
		It is located in the ODT door/window toolbar.
		It is located in the strip footing toolbar.
178186	Deselect All	Home/Edit	Deselects all entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
179187	Design Components	Tools/Quantity Report	Design components.
180188	Directional Light	Rendering/Lights-Camera	Draws directional light.
181189	Directional Light Settings	Rendering/Lights-Camera/Directional Light	Directional light settings.
182190	Display Vertical Frame	View/Workplane	Display a vertical frame.
183191	Distance	Home/Reference	Calculates distance.
		Facade/Reference
		Concrete/Reference
		Steel/Reference
		Tools/Reference
		Drawings/Reference
184192	Distribute by Drawing a Path	It is located in the distribute toolbar.	Distribute by drawing a path.
185193	Distribute by Selecting an Edge of Entity	It is located in the distribute toolbar.	Distribute by selecting an edge of entity.
186194	Distribute Entities	Home/Modify	Distrubutes the selected entities.
187195	Distribute Horizontally	It is located in the distribute toolbar.	Distrubutes selected entities to the horizontally.
188196	Distribute Object Center	It is located in the distribute toolbar.	Distribute selected entities to the object center.
189197	Distribute Nearest Point	It is located in the distribute toolbar.	Distribute selected entities to the nearest point.
190198	Distribute Vertically	It is located in the distribute toolbar.	Distrubute selected entities to the vertically.

		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
191199	Divide	Home/Modify	Divides the objects to the desired number.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
192200	Divide-Combine All Intersections	Steel/Steel/Steel Purlin	Divides and combines on all intersections.
193201	Divide-Combine Single Intersection	Steel/Steel/Steel Purlin	Divides and combines on selected intersections.
252202	Dome	Home/Roof	Draws dome.
194203	Dome Gutter	Facade/3D Geometric Object	Draws dome gutter.
195204	Dome Gutter Settings	Facade/3D Geometric Object/Dome Gutter	Opens dome gutter settings.
196205	Dome Settings	Home/Roof/Dome	Opens dome settings.
197206	Door / Window Settings	Home/Door-Window/Door-Window	Opens door/Window settings.
		Facade/Door-Window/Door-Window
198207	Door/Window	Home/Door-Window	Draws Door/Window.
		Facade/Door-Window
199208	Dormer	Home/Roof	Draws dormer.
200209	Dormer Dio	Home/Door-Window	Draws dormer window.
		Home/Roof/Dormer
		Facade/Door-Window
201210	Dormer Settings	Home/Roof/Dormer	Opens dormer settings.
202211	Double Angle Connection	Steel/Macro/Single Plate Connection	Creates a double angle connection.
203212	Double Plate Seating Connection	Steel/Macro/Single Plate Connection	Creates a double plate seating connection.
204213	Double Vault	Steel/Macro/Truss	Draws Double Vault Truss.
205214	Drafting Mode	Tools/Tools	Enters drafting mode.
206215	Draw Line Weights	View/View	Draw line weights.
207216	Draw in Fast Mode	Steel/Macro	Draws connection in fast mode.
208217	Draw Similar Entity	Right click menu	Draws similar entity of the selected one.
209218	Draw Single Steel Brace	It is located in the steel brace toolbar.	Draws single steel brace.
210219	Draw Slab Hole	It is located in the slab for steels toolbar.	Draws slab hole.
211220	Draw Steel Brace	It is located in the steel brace toolbar.	Draws steel brace elements.
212221	Draw Steel Brace Multiple Elements	It is located in the steel brace toolbar.	Draws steel brace with multiple steel elements.
213222	Drawing List	View/Window	Display drawing list.
		Drawings/Window
214223	Drawings	View/Window	Arrange drawings in the project.
215224	Draws Curtain Wall Dio	Home/Door-Window	Draws curtain wall dio.
216225	Eaves Haunch	Steel/Macro/Single Plate Connection	Creates a eaves haunch connection.
217226	Edge Aligned Single Footing	It is located in the single footing toolbar.	Sets edge aligned single footing.
218227	Edit Curtain Wall Item	Facade/Exterior Facade/Curtain Wall	Edits curtain wall item.
228	Edit Door/Window Angles	It is located in the ODT Door/Window toolbar.	Edits door/window angle.
219229	Edit Label Text	Modify/Entity Edit/Dimension	Edit label text.
220230	Edit Material	Rendering/Render	Edits material of an object.
221231	Edit Railing Elevations	Home/Entities/Railing	Edits railing elevations.
		Facade/Railing/Railing
222232	Edit Slab Edge	It is located in the slab for steels toolbar.	Edit slab edge.
223233	Edit Stair	Modify/Entity Edit/Stair	Edit stair.
224234	Edit Surface Mapping	Rendering/Render	Edits surface mapping parameters.
225235	Edit Text	Modify/Entity Edit	Edit text.
		Drawings/Text
226236	Edit Walls	Modify/Entity Edit/Wall	Edit walls.
227237	Elevation Line	Home/Terrain/Terrain Polygon	Draws elevation line for terrain.
228238	Elevation Line	Drawings/Tools	Draws elevation line for elevation.
229239	Elevation Line Settings	Drawings/Tools/Elevation Line	Elevation line settings.
230240	Elevation Point	Home/Terrain/Terrain Polygon	Draws elevation point.
231241	Ellipse Center-Corner	Drawings/Primitives/Ellipse Corners	Draws ellipse using center and corner.
232242	Ellipse Corner	Drawings/Primitives	Draws ellipse using corner.
233243	Ellipse Mid-Axis	Drawings/Primitives/Ellipse Corners	Draws ellipse using midpoint and axis.
234244	Elliptical Arc Center-Corner	Drawings/Primitives/Ellipse Corners	Draws elliptical arc using center and corner.
235245	Elliptical Arc Corners	Drawings/Primitives/Ellipse Corners	Draws elliptical arc using corners.
236246	Elliptical Arc Mid-Axis-Angles	Drawings/Primitives/Ellipse Corners	Draws elliptical arc using midpoint and axis.
237247	End Plate Shear Connection	Steel/Macro/Single Plate Connection	Creates an end plate shear connection.
238248	End Plate Truss Connection	Steel/Macro/Single Plate Connection	Creates an end plate truss connection.
239249	End Plate Truss Connection For Box/Tube	Steel/Macro/Single Plate Connection	Creates an end plate truss connection for box/tube.
240250	Enter	Keyboard	Runs the command. It has functions in various command stages.
241251	Entity From Primitives	Tools/Generate	Entity from primitives.
242252	Entity Properties	Home/Modify	Changes entity properties.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Modify/Entities
		Drawings/Modify
243253	Esc	Keyboard	Exits the found command.
244254	Exchange Coordinates	It is located in the single footing toolbar.	Exchange coordinates.
245255	Exit	ideCAD logo	Quits the application.
246256	Explode	Home/Modify	Separates the blocks into sub-blocks.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
247257	Explode Roof	Modify/Entity Edit/Roof	Explodes roof.
248258	Explode Into Single Elements	It is located in the steel beam toolbar.	Explodes and groups multi-element entities into single elements.
		It is located in the steel purlin toolbar.
249259	Export To AMP	Tools/Quantity Report/Export	Exports components as a database file To AMP.
250260	Export To OSKA	Tools/Quantity Report/Export	Exports components as a database file To OSKA.
252261	Extend	Home/Modify	Line extends primitive objects such as arcs to another line or arc.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
253262	Exterior Veneer	Facade/Exterior Facade	Draws exterior veneer.
254263	Exterior Veneer Settings	Facade/Exterior Facade/Exterior Veneer	Exterior veneer settings.
255264	Extruded Object	Home/Entities/3D Objects	Draws extruded object.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
256265	FasciaBoard	Home/Roof/Roof Details	Draws fascia boards.
257266	Fast Move	Home/Modify	Activates fast move.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
258267	Fillet	Home/Modify	It connects two lines with an arc.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
259268	Find & Replace	Tools/Tools	Finds entities based on their labels and change the labels.
260269	Find Hatch Holes	It is located in the hatch toolbar.	Finds hatch holes.
261270	Find in Perspective	Right click menu in perspective view	Finds the selected object which is in the plan window, in the perspective window and zooms the view to that object.
262271	Find in Plan	Right click menu in plan view	Finds the selected object which is in the perspective window, in the plan window and zooms the view to that object.
263272	Flange Plate Connection	Steel/Macro/Single Plate Connection	Creates a flange plate connection.
264273	Flat	Steel/Macro/Truss	Draws Flat Truss.
265274	Fly Mode	Right click menu in perspective view	Opens fly mode.
266275	Formatted Text	Drawings/Text	Draws formatted text.
267276	Free Dimension	Drawings/Dimension	Draws free dimension.
340277	Free Dimension Settings	Drawings/Dimensions/Free Dimension	Opens free dimension settings.
268278	Free Drawn	It is located in the sweep toolbar.	Sets free drawn.
269279	Freehand	Drawings/Primitives	Draws freehand curve.
270280	Free Mode Slab	Concrete/Concrete/Slab	Creates a free mode slab by selecting boundary entities manually.
271281	Free Mode Zone	Home/Zone/Zone	Creates a free mode zone by selecting boundary entities manually.
272282	Front	View/Perspective	Changes view to front.
273283	General Sweep Settings	Facade/3D Geometric Object	Sweep settings.
274284	Generate 2D Drawing	Tools/Generate	Generates a 2D simple drawing using current drawing.
		Drawings/Tools
275285	Generate Vector Drawing	Tools/Generate	Generates vector drawing.
		Rendering/Tools
276286	Get Elevation From Terrain	It is located in the terrain toolbar.	Get elevation from terrain.
277287	Get Entity Settings	Home/Modify	Picks settings from entity.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Modify/Entities
		Drawings/Modify
278288	Get Selection	Tools/Selection Groups	Gets currently selected entities.
279289	Girt Connection	Steel/Macro/Single Plate Connection	Creates a girt connection.
280290	Grid & Limits	View/View	Grid & limits settings.
281291	Group List	Tools/Selection Groups	Groups selected entities and selects entities based on these groups.
359292	Hall	Steel/Macro	Creates hall.
293	Hall Macro Settings	Steel/Macro/Hall	Opens the hall settings.
360294	Hand Rail	Steel/Macro	Creates steel hand rail.
295	Hand Rail Macro Settings	Steel/Macro/Hand Rail	Opens the hand rail settings.
282296	Hatch Hole	Drawings/Hatch	Draws hatch hole.
283297	Hatch Settings	Drawings/Hatch/User Defined Hatch	Hatch settings.
284298	Haunch	Steel/Macro/Single Plate Connection	Creates a haunch connection.
285299	Hidden Line	View/View/Solid with Edges	Changes view detail to hidden line.
286300	Hidden Line - Black & White	View/View	Changes view detail to hidden line black && white.
366301	Hide/Filter Object	Right click menu	Removes all selected entities in the 3D view.
287302	Hide/Show Edge	Modify/Entity Edit/Sweep	Hides/shows edge.
288303	Hide/Show Edge Part	Modify/Entity Edit/Sweep	Hides/shows edge part.
289304	Hip/Valley Rafter	Home/Roof/Roof Details	Draws hip/valley rafters.
290305	Hole	Home/Terrain	Draws hole.
291306	Horizontal Plan Section	Rendering/Tools	Opens horizontal plan section toolbar.
292307	Horizontal Workplane	View/Workplane/Target Workplane	Creates a horizontal workplane.
293308	IFC (Import)	Tools/Import-Export/Import	Imports IFC file. Merges file content with current project.
		ideCAD logo/Import
294309	IFC (Export)	Tools/Import-Export/Export	Exports project to IFC.
		ideCAD logo/Export
295310	II BV Report	Tools/Quantity Report	Creates II BV report.
296311	Import Text	Drawings/Text	Imports text from a text file.
297312	In background	Right click menu/Drawing order	Sends the selected object to the background.
298313	In background of object	Right click menu/Drawing order	Sends the selected object behind a certain object.
299314	In foreground	Right click menu/Drawing order	Sends the selected object to the foreground.
300315	In foreground of object	Right click menu/Drawing order	Sends the selected object in front of a certain object.
301316	Incline Objects	Modify/Entity Edit	Incline objects.
302317	Include Beams	It is located in the dimension toolbar.	Includes beams into section dimension.
303318	Include Details	It is located in the dimension toolbar.	Includes doors/windows into section dimension.
304319	Include Slabs	It is located in the dimension toolbar.	Includes slabs into section dimension.
305320	Inner Dimension	Drawings/Dimensions	Draws inner dimension.
380321	Inner Dimension Settings	Drawings/Dimensions/Free Dimension	Opens inner dimension settings.
306322	Input Units	Settings/Project Settings	Opens input units.
307323	Insert Layout Block	Drawings/Layout Design/Create New Layout	Inserts a layout block.
308324	Insertion Point	Home/Concrete/Stair	Changes insertion point.
		Concrete/Concrete/Stair
		It is located in the ODT door/window toolbar.
		It is located in the stair toolbar.
		It is located in the library toolbar.
309325	Intersection Dimension	Drawings/Dimensions	Draws intersection dimension.
310326	Invert Selection	Home/Edit	Inverts current selection.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
311327	ideCAD Home	ideCAD logo	Opens the start page.
312328	Jamb	Home/Door-Window/Door-Window	Draws jamb.
		Facade/Exterior Veneer
		Facade/Door-Window/Door-Window
313329	Jamb Settings	Facade/Exterior Veneer/Jamb	Opens jamb settings.
314330	Join	Home/Modify	Joins linear objects.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
315331	Joining Plates Connection	Steel/Macro/Single Plate Connection	Creates a beam-beam connection (Joining plates).
316332	L (Coordinate Box)	Coordinate Box	L enters the coordinate box. Object length is entered.
317333	Label	Drawings/Dimension	Draws label.
318334	Label Entities	Modify/Entity Edit	Label entities.
319335	Lap Siding	It is located in the exterior veneer toolbar.	Draws lap siding.
320336	Lap Siding with Gap	It is located in the exterior veneer toolbar.	Draws lap siding with gap.
321337	Last Selection	Home/Edit	Selects last selected entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
322338	Lath	Home/Roof/Roof Details	Draws laths.
323339	Layer	Settings/Element Properties	Opens layer settings.
340	Layer Settings	Right click menu on the plan view.	Opens layer settings.
324341	Layout Settings	Drawings/Layout Design/Create New Layout	Changes settings of current layout.
325342	Left	View/Perspective	Changes view to left.
326343	Left Middle Aligned Column	It is located in the column toolbar.	Sets edge left middle aligned.
327344	Left Side	It is located in the dimension toolbar.	Left side section dimension.
328345	Level Dimension	Drawings/Dimension	Draws level dimension.
398346	Level Dimension Settings	Drawings/Dimensions/Level Dimension	Opens level dimension settings.
329347	Library	Home/Entities	Draws library.
		Rendering/3D Geometric Objects
		Drawings/Primitives
330348	Library Settings	Home/Entities/Library	Draws library settings.
		Rendering/3D Geometric Objects/Library
		Drawings/Primitives/Library
331349	Load Settings	Settings/Project Settings	Loads settings from a file.
332350	Local Undo	Tools/Edit	Local undo, undo for current mode only.
333351	Lock/Unlock Layers	Modify/Layers	Locks/Unlocks layers.
127352	Lock Entity Layer	Right Click Menu	Lock the layer of the object.
334353	Make Block	Home/Modify	Blocks entities.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
335354	Make Compatible With Structural/Architectural	Tools/Edit	Make architectural file compatible with structural.
336355	Materials	Settings/Element Properties	Materials are listed, edited, created.
		Rendering/Render
337356	Menu	Settings/Menu Settings	Opens menu settings.
338357	Metal Slab	Steel/Steel/Composite Slab	Draws metal slab.
339358	Midpoint	Home/Snap	Snaps to midpoints of entities.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
340359	Mirror	Home/Modify	Takes symmetry.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
341360	Mirror Door/Window Label	It is located in the ODT door/window toolbar.	Mirrors door/window labels.
342361	Mirror X	It is located in the ODT door/window toolbar.	Takes symmetry with respect to the X-axis.
		It is located in the column toolbar.
		It is located in the strip footing toolbar.
343362	Mirror Y	Home/Concrete/Stair	Takes symmetry with respect to the Y-axis.
		Concrete/Concrete/Stair
		It is located in the ODT door/window toolbar.
344363	Modify Truss Elements	It is located in the trusses toolbar.	Allow modify sub elements of truss.
345364	Move	Home/Modify	Move.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
346365	Move Axis Label	Home/Axis/Axis	Moves axis label.
		Concrete/Axis/Axis
		Steel/Axis/Axis
		Modift/Entity Edit
347366	Move Dimension Text	Modify/Entity Edit/Dimension	Moves dimension texts.
348367	Move Raft Foundation Text	It is located in the raft foundation toolbar.	Moves raft foundation text.
349368	Move Slab Text	Modify/Entity Edit/Slab	Moves slab text.
434369	Move Stair Text	Home/Door-Window/Stair	Moves stair text.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
350370	Move Zone Text	Modify/Entity Edit/Zone	Moves zone text.
351371	Multi Stiffener Plate	Steel/Macro/Single Plate Connection	Creates multi stiffener plates.
352372	Multi Stiffener Plate (Horizontal)	Steel/Macro/Single Plate Connection	Creates horizontal multi stiffener plates.
353373	Multiple Lines	Drawings/Primitives	Draws multiple lines.
354374	Nearest Point	Home/Snap	Snaps to nearest points of entities.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
355375	New	ideCAD logo	Opens the new project open dialog.
356376	New 2D Window	ideCAD logo	Creates a new, empty 2D drawing window.
357377	New Horizontal Plan Section	It is located in the horizontal plan section toolbar.	Adds new horizontal plan sections.
358378	New Project	ideCAD logo	Creates a new project.
359379	New Layout Block-All Drawing	Drawings/Layout Design/Create New Layout	Creates a new layout block using all drawing.
360380	New Layout Block-Circle	Drawings/Layout Design/Create New Layout	Creates a new layout block
361381	New Layout Block-Path Polygon	Drawings/Layout Design/Create New Layout	Creates a new layout block
362382	New Layout Block-Polygon	Drawings/Layout Design/Create New Layout	Creates a new layout block
363383	New Layout Block-Rectangle	Drawings/Layout Design/Create New Layout	Creates a new layout block
384	New Trim Group	It is located in the trim to roof toolbar.	Add new trim group.
364385	Next Window	View/Window	Activates next window.
365386	Node Settings	View/Nodes	Opens node settings.
366387	Notched Seating Connection	Steel/Macro/Single Plate Connection	Creates a notched seating connection.
367388	NURBS	Drawings/Primitives	Draws NURBS curve.
367389	Offset	Home/Modify	Offset.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
368390	OK	It is located in the section toolbar.	Finishes the current job.
369391	Open	ideCAD logo	Opens a previously saved project.
370392	Ortho	Home/Snap	Enters orthogonal drawing mode.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
371393	Outer Dimension	Drawings/Dimensions	Draws outer dimension.
457394	Outer Dimension Settings	Drawings/Dimensions/Free Dimension	Opens outer dimension settings.
372395	Page Down	Keyboard	Scrolls down the page in reports. Also shifts the viewpoint down in fly mode in the perspective view.
373396	Page Up	Keyboard	Scrolls the page up in reports. Also shifts the viewpoint upwards in flight mode in the perspective view.
374397	Pan	View/Zoom	Pans the window.
375398	Parallel Reference	Home/Snap	Parallel reference.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
376399	Paste	Home/Edit	Paste entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
377400	Path	Drawings/Primitives	Draws path primitives.
378401	Path Based	It is located in the sweep toolbar.	Sets path based.
379402	Pattern Path	Drawings/Primitives	Draws pattern path.
380403	Parametric Hatch	Drawings/Hatch	Draws parametric hatch.
381404	Parent Based	It is located in the sweep toolbar.	Sets parent based.
382405	Paste Contour	Tools/Edit	Pastes contours.
383406	Paste From File	Tools/File Sharing	Pastes entities from a .blk file.
384407	PDF (Export)	Tools/Import-Export/Export	Exports To PDF.
		ideCAD logo/Export
385408	Pen Color	Settings/Element Properties	Opens pen and color settings.
386409	Perpendicular Reference	Home/Snap	Perpendicular reference.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
387410	Perspective	View/Perspective	Changes view to perspective.
388411	Photometric Light	Rendering/Lights-Camera	Draws photometric light.
389412	Photometric Light Settings	Rendering/Lights-Camera/Photometric Light	Photometric light settings.
390413	Plan Screenshot	Tools/Import-Export/Export	Saves the screen image as a bitmap file.
		ideCAD logo/Export
391414	Planar Texture Mapper	Rendering/Render	Creates Planar Texutre Mapper Object.
392415	Plateau	Home/Terrain	Draws plateau.
393416	Plot	ideCAD logo	Plots your drawings.
394417	Point Light	Rendering/Lights-Camera	Draws point light.
395418	Point Light Settings	Rendering/Lights-Camera/Point Light	Point light settings.
396419	Polar Array	Home/Edit	Creates copies of objects with rotation.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
397420	Polar Tracking	Settings/Project Settings	Polar tracking.
398421	Polygon Column	Home/Concrete/Column	Draws polygon column.
		Concrete/Concrete
399422	Polygon To Plate Section	Modify/Transform/Beam to Shearwall	Transforms primitive entities to plate section.
400423	Polygonal Sheeting	Steel/Steel/Sheeting	Draws sheeting polygon.
401424	Pool	Home/Entities	Draws pool.
402425	Pool Settings	Home/Entities/Pool	Opens pool settings.
403426	Post	Home/Roof/Roof Details	Draws a post.
404427	Preferences	Home/Project Settings	Opens preferences.
		Settings/Project Settings
405428	Previous Window	View/Window	Activates previous window.
406429	Profiles	Settings/Element Properties	Opens profiles
407430	Project	Settings/Project Settings	Open project settings.
408431	Project Save Settings	Settings/Project Settings	Open project save settings.
409432	Project Settings	Home/Project Settings	Opens project settings.
		Concrete/Project Settings
		Steel/Project Settings
410433	Purlin	Home/Roof/Roof Details	Draws purlins.
411434	Purlin Connection	Steel/Macro/Single Plate Connection	Creates a purlin connection.
511435	Quad Stiffener Plate	Steel/Macro/Single Plate Connection	Creates stiffener plates.
412436	Quantity Report	Tools/Quantity Report	Generates a report of quantities in the project.
413437	R Purlin	Steel/Steel/Steel Purlin	Draws R purlin.
414438	Radius Dimension	Drawings/Dimension	Draws radius dimension.
514439	Radius Dimension Settings	Drawings/Dimensions/Level Dimension	Opens radius dimension settings.
415440	Raft	Concrete/Foundation	Draws raft foundation.
416441	Raft Edge	Concrete/Foundation	Draws raft edge.
417442	Raft Edge Settings	Concrete/Foundation/Raft Edge	Opens raft edge settings.
418443	Raft Foundation Hole	Concrete/Foundation/Raft	Draws raft foundation hole.
419444	Raft Foundation Settings	Concrete/Foundation/Raft	Opens raft foundation settings.
420445	Rafter	Home/Roof/Roof Details	Draws rafters.
421446	Railing	Home/Entities	Draws railing.
		Facade/Railing
422447	Railing 3D	Home/Entities/Railing	Draws 3D railing.
423448	Railing Over Objects	Home/Entities/Railing	Draws 3D railing over objects.
424449	Railing Settings	Home/Entities/Railing	Opens railing settings.
		FacadeRailing/Railing
425450	Rainwater Pipe	Home/Roof	Draws rainwater pipe.
426451	Rainwater Pipe Settings	Home/Roof/Rainwater Pipe	Opens rainwater pipe settings.
427452	Raster Image	Drawings/Primitives	Places a raster image file onto the drawing.
428453	Recall Last Render	Rendering/Render	Recalls render with the last settings.
429454	Rectangle	Drawings/Primitives/Multiple Lines	Draws a rectangle.
430455	Rectangular Wall	Home/Wall	Draws 4walls as a rectangle.
431456	Redo	Tools/Edit	Redo.
432457	Remove End Cut Of Edge	Modify/Entity Edit/Sweep	Removes end cut of edge.
433458	Remove From Selection Group	Right click menu	Removes objects from the group.
434459	Remove Inner Cut Of Edge	Modify/Entity Edit/Sweep	Removes inner cut of edge.
435460	Remove Local Offset Of Edge	Modify/Entity Edit/Sweep	Removes local offset of edge.
436461	Remove Nodule	It is located in the space truss toolbar.	Removes a nodule from space truss.
437462	Remove Offset Of Edge	Modify/Entity Edit/Sweep	Removes offset of edge.
438463	Remove Point	It is located in the hatch toolbar.	Removes an existing point on the hatch.
439464	Render	Rendering/Render	Renders active view.
441465	Reset Dimension Texts	Modify/Entity Edit/Dimension	Resets dimension text displacements.
442466	Reset Settings	Settings/Project Settings	Resets settings.
443467	Revision Cloud	Drawings/Primitives	Draws revision cloud.
444468	Revolved Object	Home/Entities/3D Objects	Draws revolved object.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
445469	Right	View/Perspective	Changes view to right.
446470	Right Side	It is located in the dimension toolbar.	Right side section dimension.
447471	Rigid on Both Axis Base Plate	Steel/Macro/Single Plate Connection	Creates a rigid on both axis base plate connection.
448472	Rigid on Strong Axis Base Plate	Steel/Macro/Single Plate Connection	Creates a rigid on strong axis base plate connection.
449473	Roof	Home/Roof	Draws roof.
		Modify/Entity Edit
450474	Roof Details	It is located in the roof toolbar.	Opens the roof details toolbar.
451475	Roof Gutter	Facade/3D Geometric Object	Draws roof gutter.
452476	Roof Gutter Settings	Facade/3D Geometric Object/Roof Gutter	Opens roof gutter settings.
453477	Roof Hole	Home/Roof/Roof	Draws roof hole.
454478	Roof Plane	Home/Roof/Roof	Draws roof plane.
455479	Roof Settings	Home/Roof/Roof	Opens roof settings.
456480	Roof Window	Home/Door-Window	Draws roof window.
		Home/Roof/Roof
		Facade/Door-Window
457481	Rotate	Home/Modify	Rotate.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
458482	Rotate Building	Home/Modify	Rotates the building.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Tools/Tools
		Drawings/Modify
459483	Rotate Curtain Wall Item	Facade/Exterior Veneer/Curtain Wall	Rotates curtain wall panel.
460484	Rotate Node	Home/Modify	Rotates node.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
461485	Round Plate Tube Base Plate	Steel/Macro/Single Plate Connection	Creates a round plate tube base plate connection.
462486	Save	ideCAD logo	Saves current project.
463487	Save As	ideCAD logo	Save current project with a new name.
464488	Save Compact	ideCAD logo	Saves compresed project file.
465489	Save Old Version	ideCAD logo	Saves old version project file.
490	Save Screen Image	ideCAD logo	Saves the screen image as a bitmap file.
466491	Save Settings	Settings/Project Settings	Saves settings to a file.
467492	Save Stair	Home/Concrete/Stair	Saves stair.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
468493	Scale	Home/Modify	Scales entities.
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
469494	Scale by Referance	Home/Modify	Scales entities by referance.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
470495	Seating Support Connection	Steel/Macro/Single Plate Connection	Creates a seating support connection(8).
471496	Seating Truss Connection	Steel/Macro/Single Plate Connection	Creates a seating truss connection.
472497	Seating Weld Connection	Steel/Macro/Single Plate Connection	Creates a seating weld connection.
473498	Secondary Stair Deformation	Modify/Entity Edit/Stair	Secondary stair deformation.
474499	Secondary Steel Beam	Steel/Steel	Draws secondary beam.
475500	Section / Elevation List	Tools/Generate	Edit and generate sections and elevations.
		Drawings/Tools	Edit and generate sections and elevations.
476501	Section Dimension	It is located in the dimension toolbar.	Draws single section dimension.
477502	Section Dimension Group	It is located in the dimension toolbar.	Draws section dimension group.
478503	Section Elevation	Drawings/Dimension	Draws section elevation.
479504	Section Elevation Settings	Drawings/Tools	Opens section elevation settings.
480505	Section Line	Drawings/Tools	Draws section line.
481506	Section Line Settings	Drawings/Tools/Section Line	Opens section line settings.
482507	Select All	Home/Edit	Selects all entitites.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
483508	Select Analysis Part	Steel/Steel/Steel Purlin	Select purlins to add analysis.
484509	Select Entity In All Stories	Home/Edit	Selects entity in all stories.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
485510	Select Group of Object	Right click menu	Select the objects in the group.
486511	Select Terrain and Child Entities	It is located in the terrain toolbar.	Selects terrain and child entities.
487512	Set Auto Elevation	It is located in the library toolbar.	Set auto elevation.
488513	Set Entity Settings	Home/Modify	Sets default settings to selected entities.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Modify/Entities
		Drawings/Modify
489514	Set Hatch Reference	Modify/Entity Edit	Sets hatch reference point.
490515	Set Local CS	Home/Snap	Sets new local coordinate system.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
491516	Set Pool Cantilever Slab Properties	Home/Entities/Pool	Set pool cantilever slab properties.
		Modify/Entity Edit/Pool
492517	Set Pool Surface Properties	Home/Entities/Pool	Set pool surface properties.
		Modify/Entity Edit/Pool
493518	Set Pool Surface Slope	Home/Entities/Pool	Set pool surface slope.
		Modify/Entity Edit/Pool
494519	Set Pool Wall Properties	Home/Entities/Pool	Set pool wall properties.
		Modify/Entity Edit/Pool
495520	Set Selection	Tools/Selection Groups	Sets currently selected entities.
497521	Set Steel Delta	It is located in the steel column toolbar.	Sets steel element delta.
		It is located in the steel beam toolbar.
498522	Set Trim Algorithm	Modify/Entity Edit	Sets entity trim algorithm.
499523	Set Wall Priority	Modify/Entity Edit	Sets priorities of wall at joints.
500524	Shearwall	Home/Concrete	Draws shearwall.
		Concrete/Concrete
501525	Shearwall Settings	Home/Concrete/Shearwall	Opens shearwall settings.
		Concrete/Concrete/Shearwall
502526	Shearwall To Beam	Modify/Transform/Beam to Shearwall	Converts shearwalls to beams.
503527	Sheeting	Steel/Steel	Draws sheeting over purlins.
504528	Sheeting Between Elements	Steel/Steel/Sheeting	Draws sheeting between two elements.
505529	Show Coordinate Box	View/View	Show coordinate box.
506530	Show Safe Frame	Right click menu in the perspective view.	Shows the render boundaries before rendering.
507531	Show Toolbars	View/View	Show toolbars.
508532	Show/Hide Dimension Text	Modify/Entity Edit/Dimension	Shows/hides dimension text.
509533	Show/Hide Layers	Modify/Layers	Show/hide entity layers.
510534	Show/Hide Nodes	View/Nodes	Shows/hides nodes
511535	Show/Hide Railing	Home/Concrete/Stair	Shows/hides railings.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
512536	Simple Base Plate	Steel/Macro/Single Plate Connection	Creates a simple base plate connection.
513537	Single	Concrete/Foundation	Draws single footing.
514538	Single Angle Connection	Steel/Macro/Single Plate Connection	Creates a single angle connection.
515539	Single Footing Settings	Concrete/Foundation/Single	Opens single footing settings.
516540	Single Plate Connection	Steel/Macro/Single Plate Connection	Creates a single plate connection.
517541	Single Plate Seating Connection	Steel/Macro/Single Plate Connection	Creates a single plate seating connection.
518542	Single Purlin	Steel/Steel/Steel Purlin	Draws single steel purlin.
519543	Single Secondary Steel Beam	It is located in the steel beam toolbar.	Draws single secondary beam.
520544	Slab	Concrete/Concrete	Draws slab.
521545	Slab Edge (Concrete)	Concrete/Concrete	Draws slab edge.
521546	Slab Edge (Steel)	Steel/Steel/Composite Slab	Draws steel slab edge.
522547	Slab Edge Settings	Concrete/Concrete/Slab Edge	Opens slab edge settings.
523548	Slab Hole	Concrete/Concrete/Slab	Draws slab hole.
524549	Slab Settings	Concrete/Concrete/Slab	Opens slab settings.
525550	Sloping Flat	Steel/Macro/Truss	Draws Sloping Flat Truss.
526551	Sloping Vault	Steel/Macro/Truss	Draws Sloping Vault Truss.
527552	Snap to Grid	Home/Snap	Snap to grid.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
528553	Snap to Nodes	Home/Snap	Snap to nodes.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
529554	Solid	View/View	Changes view detail to solid.
530555	Solid with Edges	View/View	Changes view detail to solid with edges.
531556	Space	Keyboard	Moves the cursor to horizontal, vertical, and free axis drawing positions on axes. Changes the offset in commands such as wall, column, beam, shearwall. Skips a name in object labeling. Changes the insertion point in commands such as stair, library.
532557	Space Purlin	Steel/Steel/Steel Purlin	Draws space purlin.
533558	Space Truss	Steel/Macro	Draws space truss.
534559	Spacer Plate Connection	Steel/Macro/Single Plate Connection	Creates a spacer plate connection.
535560	Sphere	Home/Entities/3D Objects	Draws sphere.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
536561	Splice Connection	Steel/Macro/Single Plate Connection	Creates a splice connection.
537562	Spot Light	Rendering/Lights-Camera	Draws spotlight.
538563	Spot Light Settings	Rendering/Lights-Camera/Spot Light	Opens spot light settings.
539564	Stair	Home/Concrete	Draws stair.
		Concrete/Concrete
707565	Stair (Steel)	Steel/Macro	Creates steel stair.
566	Stair Macro Settings	Steel/Macro/Stair	Opens the steel stair settings.
540567	Stair Settings	Home/Concrete/Stair	Opens stair settings.
		Concrete/Concrete/Stair
541568	Stay Connection	Steel/Macro/Single Plate Connection	Creates a stay connection.
542569	Stay Connection (Secondary Beam)	Steel/Macro/Single Plate Connection	Craetes a stay connection (secondary beam).
543570	Steel Beam	Steel/Steel	Draws steel beam.
544571	Steel Brace	Steel/Steel	Draws steel brace.
545572	Steel Column	Steel/Steel	Draws steel column.
546573	Steel Column 2 Points	It is located in th steel column toolbar.	Draws steel column.
733574	Steel Hand Rail Macro on Arc	Steel/Macro/Hand Rail	Creates steel hand rail on arc.
734575	Steel Hand Rail Macro on Line	Steel/Macro/Hand Rail	Creates steel hand rail on line.
547576	Steel Purlin	Steel/Steel	Draws steel purlin.
548577	Steel Tie	Steel/Steel/Steel Purlin	Draws steel tie.
549578	Stiffened End Plate Connection	Steel/Macro/Single Plate Connection	Creates a stiffened end plate connection.
550579	Stiffened Shear Plate Connection	Steel/Macro/Single Plate Connection	Creates a stiffened shear plate connection.
551580	Story	Settings/Project Settings	Arrange stories in the project.
552581	Story Alignment Free	It is located in the sweep toolbar.	Sets story alignment free.
553582	Story Bottom Aligned	It is located in the sweep toolbar.	Sets story bottom aligned.
554583	Story Copy	Home/Project Settings	Copies all entities from a story to another story.
		Concrete/Project Settings
		Steel/Project Settings
		Tools/Edit
555584	Story List	Home/Project Settings	Opens story list.
		Concrete/Project Settings
		Steel/Project Settings
		View/Window
		Drawings/Window
556585	Story Settings	Home/Project Settings	Arrange stories in the project.
		Concrete/Project Settings
		Steel/Project Settings
557586	Story Top Aligned	It is located in the sweep toolbar.	Sets story top aligned.
558587	Stretch Node	Home/Modify	Stretch node.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
559588	Strip	Concrete/Foundation	Draws multiple strip footings.
560589	Strip Footing Settings	Concrete/Foundation/Strip	Opens strip footing settings.
561590	Structural Design Mode	View/Mode	Enters structural design mode.
562591	Strut	Home/Roof/Roof Details	Draws a strut.
563592	Stub	Steel/Macro/Single Plate Connection	Creates stub.
564593	Sub Region	Home/Terrain	Draws sub region.
565594	Swap Side	It is located in the exterior veneer toolbar.	Swaps side.
566595	Sweep	Home/Entities/3D Objects	Draws sweep.
		Facade/3D Geometric Objects/3D Objects
		Modify/Entity Edit
		Rendering/3D Geometric Objects
567596	Sweep Operations	It is located in the sweep toolbar.	Opens the sweep operations toolbar.
568597	Switch Windows	Drawings/Window	Returns to last story window.
569598	T Plate Connection	Steel/Macro/Single Plate Connection	Creates a T plate connection.
570599	Tangent	Home/Snap	Draws tangents.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
571600	Target Workplane	View/Workplane	Creates a free workplane using existing objects.
572601	Terra Cotta Siding	It is located in the exterior veneer toolbar.	Draws terra cotta siding.
573602	Terrain Polygon	Home/Terrain	Draws terrain polygon.
574603	Terrain Settings	Home/Terrain/Terrain Polygon	Opens terrain settings.
575604	Text	Rendering/3D Geometric Objects/3D Text	Draws text.
		Drawings/Text
576605	Text Settings	Rendering/3D Geometric Objects/3D Text	Opens font settings.
		Drawings/Text/Text
577606	Tip of the Day	ideCAD logo/Help	Shows tip of the day.
788607	Toggle Axonometric View	Right click menu	Switches between perspective and axonometric views.
578608	Toggle Fullscreen	View/Window	Resizes the view to full screen.
579609	Top	View/Perspective	Changes view to perspective.
580610	Transform To Ribbed Slab	Concrete/Concrete/Slab	Transforms a slab to a ribbed slab.
		Modify/Entity Edit/Slab
581611	Transform To Waffle Slab	Concrete/Concrete/Slab	Transforms a slab to a waffle slab.
		Modify/Entity Edit/Slab
582612	Transparent Story	View/View	Opens transparent story settings dialog.
583613	Trapezoid Sloping Left	Steel/Macro/Truss	Draws Trapezoid Sloping Left Truss.
584614	Trapezoid Sloping Right	Steel/Macro/Truss	Draws Trapezoid Sloping Right Truss.
585615	Trapezoid Sloping Symmetric	Steel/Macro/Truss	Draws Trapezoid Sloping Symmetric Truss.
586616	Trapezoid Slopping Asymmetric	Steel/Macro/Truss	Draws Trapezoid Slopping Asymmetric Truss.
587617	Trapezoid Type 1	Steel/Macro/Truss	Draws Trapezoid Type 1 Truss.
588618	Trapezoid Type 2	Steel/Macro/Truss	Draws Trapezoid Type 2 Truss.
589619	Trapezoid Vault	Steel/Macro/Truss	Draws Trapezoid Vault Truss.
590620	Triangular Asymmetric	Steel/Macro/Truss	Draws Triangular Asymmetric Truss.
591621	Triangular Sloping Left	Steel/Macro/Truss	Draws Triangular Sloping Left Truss.
592622	Triangular Sloping Right	Steel/Macro/Truss	Draws Triangular Sloping Right Truss.
593623	Triangular Symmetric	Steel/Macro/Truss	Draws Triangular Symmetric Truss.
594624	Trim	Home/Modify	Line cuts primitive objects such as arcs to another line or arc.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
595625	Trim Column	Modify/Entity Edit/Column	Trims column edges with an axis or beam.
596626	Trim To Roof	Home/Roof/Roof	Trims entities with roofs.
		Modify/Entity Edit/Roof
		Tools/Tools
597627	Trim/Extend Wall	Home/Wall/Wall	Trims/extends walls.
		Modify/Entity Edit/Wall
598628	Trimmer	Home/Roof/Roof Details	Draws a trimmer.
599629	Truss	Steel/Macro	Draws Custom Truss.
600630	Truss Connection	Steel/Macro/Single Plate Connection	Creates a truss connection.
601631	Tube	Home/Entities/3D Objects	Draws tube.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
602632	Tube Base Plate	Steel/Macro/Single Plate Connection	Creates a tube base plate connection.
603633	Undo	Tools/Edit	Undo.
604634	Unstiffened Seated Connection	Steel/Macro/Single Plate Connection	Creates an unstiffened seated connection.
605635	Update Layout Block	Drawings/Layout Design/Create New Layout	Updates linked layout blocks.
606636	Update Library Elevation	Home/Entities/Library	Update library elevation.
		Rendering/3D Geometric Objects/Library
607637	Update Railing 3D	Home/Entities/Railing	Updates 3D railing.
		Rendering/Railing/Railing
608638	Use Distance	It is located in the ODT door/window toolbar.	Use distance.
609639	Use Dio Reference	It is located in the ODT door/window toolbar.	Use dio as reference.
610640	User Defined Hatch	Drawings/Hatch	Draws user defined hatch.
611641	User Defined Tube	It is located in the tubes toolbar.	Draws user defined tube.
612642	Vault (Concrete)	Home/Roof	Draws vault.
613643	Vault (Steel)	Steel/Macro/Truss	Draws Vault Truss.
614644	Vault Settings	Home/Roof/Vault	Opens vault settings.
615645	Vertical Workplane	View/Workplane/Target Workplane	Creates a vertical workplane.
616646	View Settings	View/View	Opens view settings.
617647	Viewport Configuration	View/Window	Display view configuration options.
618648	Wall	Home/Wall	Draws wall.
		Modify/Wall
619649	Wall Based	It is located in the sweep toolbar.	Sets wall based.
620650	Wall Settings	Home/Wall/Wall	Opens wall settings.
621651	Wavefront .OBJ (Import)	Tools/Import-Export/Import	Import .obj files.
		ideCAD logo/Import
3652	Wavefront.OBJ (Export)	Tools/Import-Export/Export	Exports to OBJ file format.
		ideCAD logo/Export
622653	Welded Box/Tube Connection	Steel/Macro/Single Plate Connection	Creates a welded box/tube connection.
623654	Welded Connection	Steel/Macro/Single Plate Connection	Creates Welded Connection.
624655	Welded Flange Plate Connection	Steel/Macro/Single Plate Connection	Creates a welded flange plate connection.
625656	Welded Web Connection	Steel/Macro/Single Plate Connection	Creates a welded web connection.
626657	Wind Connection	Steel/Macro/Single Plate Connection	Creates a wind connection.
627658	X (Coordinate Box)	Coordinate Box	Enters the X coordinate box. X coordinate is entered.
628659	Y (Coordinate Box)	Coordinate Box	Enters the Y coordinate box. Y coordinate is entered.
629660	Zone	Home/Zone	Draws zone.
		Modify/Entity Edit
630661	Zone Edge	Home/Zone	Draws zone edge.
631662	Zone Hole	Home/Zone	Draws zone hole.
632663	Zone List	Home/Zone	Draws zone list.
633664	Zone Edge Settings	Home/Zone/Zone Edge	Opens zone edge settings.
634665	Zone Hole Settings	Home/Zone/Zone Hole	Opens zone hole settings.
635666	Zone List Settings	Home/Zone/Zone List	Opens zone list settings.
636667	Zone Settings	Home/Zone/Zone	Opens zone settings.
637668	Zoom	View/Zoom	Zooms the window.
638669	Zoom Extents	View/Zoom	Zooms to the extents of the drawings.
639670	Zoom Selection	View/Zoom	Zoom selection.
640671	Zoom Window	View/Zoom	Zoom into a rectangular window.
641672	Zoom In (+)	Keyboard	Zooms in.
642673	Zoom Out (-)	Keyboard	Zooms out.

...

Versions Compared

Old Version 65

New Version 66

Key