Page Comparison

...

	Command	Location of command in ribbon menu or toolbar	Explanation
1	3D Block (Import)	Tools/Import-Export/Import	Imports 3D Block.
		ideCAD logo/Import
2	3D Block (Export)	Tools/Import-Export/Export	Exports 3D Block.
		ideCAD logo/Export
		ideCAD logo/Export
3	3D Railing Over Objects	Facade/Railing	Draws 3D railing over objects.
4	3D Railing	Facade/Railing	Draws 3D railing.
5	3D Text	Rendering/3D Geometric Objects	Draws 3d text.
6	3DS (Export)	Tools/Import-Export/Export	Exports to 3DS file format.
		ideCAD logo/Export
7	3DS (Import)	Tools/Import-Export/Import	Imports 3DS file format.
		ideCAD logo/Import
8	3P Workplane	View/Workplane/Target Workplane	Creates a workplane through 3 points.
	4 Bolts Stiffened End Plate Connection	Steel/Macro/Single Plate Connection	Creates a 4 bolts stiffened end plate
9	4 Bolts Unstiffened End Plate Connection	Steel/Macro/Single Plate Connection	Creates a 4 bolts unstiffened end plate connection.
10	8 Bolts Stiffened End Plate Connection	Steel/Macro/Single Plate Connection	Creates a 8 bolts stiffened end plate connection.
11	About ideCAD Architectural	ideCAD logo/Help	It gives the program version and usage license information.
12	Activate Local CS	Home/Snap	Uses defined local coordinate system.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
13	Add Custom Snap Points on Line	Right click menu in perspective view	Creates snap points on a line in a perspective image.
14	Add Entity	It is located in the trim to roof toolbar.	Adds new entities to the trim group.
15	Add Lines to Edges	It is located in the hatch toolbar.	Adds lines to the hatch edges.
16	Add Point	It is located in the hatch toolbar.	Add a new point to hatch.
17	Add Roof	It is located in the trim to roof toolbar.	Adds roof to the trim group.
18	Add Stair Area	Home/Concrete/Stair	Adds stair area to an existing stair.
		Concrete/Concrete/Stair
19	Add To Selection Group	Right click menu	Adds new objects to the groups
20	Add/Remove Dimension Parent	Modify/Entity Edit/Dimension	Adds/removes dimension parents.
21	Advanced Arrray	Home/Edit	Generates array of entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
22	Advanced Snap	Home/Snap	Enables advanced snap mode.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
23	Alias Editor	Settings/Menu Settings	Edits commands used on the command line.
24	Align Bottom	It is located in the align toolbar.	Aligns the selected entities at the bottom.
25	Align by Drawing a Path	It is located in the align toolbar.	Aligns the selected entities by drawing a path.
26	Align by Selecting an Edge of Entity	It is located in the align toolbar.	Align the selected entities by selecting an edge of entity.
27	Align Entities	Home/Modify	Aligns the selected entities.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
28	Align Left	It is located in the align toolbar.	Aligns the selected entities to the left.
29	Align Object Center	It is located in the align toolbar.	Aligns the selected entities to the object center.
30	Align Nearest Point	It is located in the align toolbar.	Aligns the selected entities to the nearest point.
31	Align Right	It is located in the align toolbar.	Aligns the selected entities to the right.
32	Align Top	It is located in the align toolbar.	Aligns the selected entities to the top.
33	Angle	Home/Reference	Measures the angle.
		Facade/Reference
		Concrete/Reference
		Steel/Reference
		Tools/Reference
		Drawings/Reference
34	Angle Dimension	Drawings/Dimension	Draws angle dimension.
35	Angle Dimension Settings	Drawings/Dimensions/Level Dimension	Opens angle dimension settings.
36	Angle Library Placement	It is located in the library toolbar.	Sets vertical angle of library automatically using underlying geometry.
37	Apex Type Connection	Steel/Macro/Single Plate Connection	Creates a apex type connection.
38	Arc (Center-Radius-Angles)	It is located in the primitives toolbar.	Draws arc.
39	Arc Axis	Home/Axis	Draws arc axis.
		Concrete/Axis
		Steel/Axis
40	Arc Axis Through 3Points	Home/Axis	Draws arc axis through 3 points.
		Concrete/Axis
		Steel/Axis
41	Arc Beam	Concrete/Concrete	Draws arc beam.
42	Arc Dome	Home/Roof/Dome	Draws arc dome.
43	Arc Dome 3P	Home/Roof/Dome	Draws arc dome through 3 points.
44	Arc Slab Edge	Concrete/Concrete/Slab Edge	Draws arc slab edge.
45	Arc Through 3 Points	It is located in the primitives toolbar.	Draws arc through 3 points.
46	Arc Wall	It is located in the wall toolbar.	Draws arc wall.
47	Arc Zone Edge	It is located in the zone edge toolbar.	Draws arc zone edge.
48	Area	Home/Reference	Calculates area.
		Facade/Reference
		Concrete/Reference
		Steel/Reference
		Tools/Reference
		Drawings/Reference
49	Array	Home/Edit	Generates an array of entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
50	Assign Material	Rendering/Render	Continously assigns selected material to face groups.
51	Auto Label Entities	Modify/Entity Edit	Auto label entities.
		Tools/Tools
52	Automatic Hatch	It is located in the hatch toolbar.	Creates hatch with closed polygons.
53	Axis	Home/Axis	Draws axis.
		Concrete/Axis
		Steel/Axis
54	Axis Border	Modify/Entity Edit/Move Axis Label	Sets the axis border.
55	Axis Offset	It is located in the axis toolbar.	Draws an axis with an offset to the previous axis drawn.
56	Axis Settings	Home/Axis/Axis	Opens axis settings.
		Concrete/Axis/Axis
		Steel/Axis/Axis
57	Axonometric	View/Perspective	Changes view to axonometric.
58	Back	View/Perspective	Changes view to back.
59	Background	View/View	Opens background settings.
60	Baseboard	It is located in the sweep toolbar.	Draws baseboard.
61	Beam	Concrete/Concrete	Draws multiple beams.
62	Beam Settings	Concrete/Concrete/Beam	Opens beam settings.
63	Beam To Shearwall	Modify/Transform	Converts beams to shearwalls.
64	Bends Curtain Wall	Facade/Exterior Facade/Curtain Wall	Bends curtain wall.
65	Bezier	Drawings/Primitives/NURBS	Draws bezier curve.
66	Bitmap Hatch	Drawings/Hatch	Draws bitmap hatch.
67	Bolted Flange Plate Connection	Steel/Macro/Single Plate Connection	Creates a bolted flange plate connection.
68	Border on Wall	It is located in the sweep toolbar.	Draws border on wall.
69	Border Vault	Home/Roof/Vault	Draws border vault.
70	Bottom	View/Perspective	Changes view to bottom.
71	Box	Home/Entities/3D Objects	Draws box.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
72	Box/Tube Cap Plate	Steel/Macro/Single Plate Connection	Creates box/tube cap plate.
73	Box/Tube End Plate Connection	Steel/Macro/Single Plate Connection	Creates a box/tube end plate connection.
74	Box/Tube Seating Connection	Steel/Macro/Single Plate Connection	Creates a box/tube seating connection.
75	Box/Tube Splice Connection	Steel/Macro/Single Plate Connection	Creates a box/tube splice connection.
76	Brace Center Connection	Steel/Macro/Single Plate Connection	Creates a brace center connection(9).
77	Brace Corner Connection	Steel/Macro/Single Plate Connection	Creates a brace corner connection(10).
78	Break	Home/Modify	Breaks off a certain part of the objects.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
79	Built-up Area & FAR Reports	Tools/BUA/FAR Reports	Creates GRZ/GFZ report.
80	Calculate Contour	Home/Axis/Axis	Calculates contour polygon.
		Concrete/Axis/Axis
		Steel/Axis/Axis
		Modify/Entity Edit/Move Axis Label
81	Camera	Rendering/Lights-Camera	Draws camera.
82	Camera Animation	Rendering/Render	Creates camera animaton.
83	Camera Path	Rendering/Render	Draws camera path.
84	Camera Settings	Rendering/Lights-Camera/Camera	Opens camera settings.
85	Cancel Secondary Stair Deformation	Modify/Entity Edit/Stair	Cancels secondary stair deformation.
86	Cancel Stair Deformation	Modify/Entity Edit/Stair	Cancels stair deformations.
87	Ceiling Cornice	It is located in the sweep toolbar.	Draws ceiling cornice.
88	Centered Column	It is located in the column toolbar.	Sets center aligned.
89	Centered Single Footing	It is located in the single footing toolbar.	Sets centered single footing.
90	Chamfer	Home/Modify	Connects two lines with a third line.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
91	Change Axis Draw Type	Home/Axis	Changes axis drawing type.
		Concrete/Axis
		Steel/Axis
92	Change Baluster Count	Home/Concrete/Stair	Changes baluster count.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
93	Change Column Dimension	Modify/Entity Edit/Column	Changes column dimensions.
94	Change Distance Point	It is located in the ODT door/window toolbar.	Change dio distance point.
95	Change Edge Part End Angles	Modify/Entity Edit/Sweep	Change edge part end angles.
96	Change Entity Layers	Modify/Layers	Changes layers of selected entities.
97	Change Jamb Side	It is located in the jamb toolbar.	Changes jamb placement to the other side of dio.
98	Change Layers	Right click menu in plan view.	Changes layers of selected entities.
99	Change Rafter Dimensions	Home/Roof/Roof	Changes rafter dimensions.
		Modify/Entity Edit/Roof
100	Change Roof Edge Properties	Home/Roof/Roof Details	Changes roof edge properties.
		Modify/Entity Edit/Roof
101	Change Shearwall Length	Home/Concrete/Shearwall	Changes shearwall length.
102	Changes Path Direction	It is located in the railing toolbar.	Changes path direction.
		It is located in the curtain wall toolbar.
103	Check for Updates	ideCAD logo/Help	Check for updates.
104	Check Geometry	Tools/Tools	Checks validity of project geometry.
105	Circle	Drawings/Primitives	Draws circle.
106	Circle Beam	Concrete/Concrete/Beam	Draws circle beam.
107	Circle Slab Edge	Concrete/Concrete Slab Edge	Draws circle slab edge.
108	Circle Wall	It is located in the wall toolbar.	Draws circle walls.
109	Circle Zone Edge	It is located in the zone edge toolbar.	Draws circle zone edge.
110	Circular Column	Home/Concrete/Column	Draws circular column.
		Concrete/Concrete
111	Clone	Home/Edit	Clones (immediately copies) objects.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
112	Close	ideCAD logo	Closes current project.
113	Closed Bezier	Drawings/Primitives/NURBS	Draws closed bezier curve.
114	Close Entity Layer	Right Click Menu	Closes the layer of the object.
115	Closed NURBS	Drawings/Primitives/NURBS	Draws closed NURBS curve.
116	Closed Polygon To Polygon Column	Modify/Transform/Beam to Shearwall	Transforms primitive entities to polygon column.
117	Closed Polygon To Polygon Section	Modify/Transform/Beam to Shearwall	Transforms primitive entities to polygon section.
118	Collar Beam	Home/Roof/Roof Details	Draws a collar beam.
119	Column	Home/Concrete	Draws rectangular column.
		Concrete/Concrete
120	Column Settings	Home/Concrete/Column	Opens column settings.
		Concrete/Concrete/Column
121	Column Support	Home/Concrete/Column	Draws column support.
		Concrete/Concrete
122	Column-Beam Stiffened End Plate	Steel/Macro/Single Plate Connection	Creates a column-beam stiffened end plate connection.
123	Column-Column Connection (Built Up Column)	Steel/Macro/Single Plate Connection	Creates a built up column connection.
124	Column-Column End Plate Splice	Steel/Macro/Single Plate Connection	Creates a column-column end plate splice connection.
125	Column-Foundation Connection (Stiffened Baseplate)	Steel/Macro/Single Plate Connection	Creates a column-foundation connection (Stiffened baseplate).
126	Components Report	Tools/Quantity Report	Creates components report.
127	Composite Materials	Settings/Element Materials	Constructs and arranges composite materials.
128	Composite Slab	Steel/Steel	Draws composite slab.
129	Composite Solid Slab	Steel/Steel/Composite Slab	Draws composite solid slab.
130	Concrete Slab	Steel/Steel/Composite Slab	Draws concrete slab over steel beams.
131	Cone-Pyramid	It is located in the tubes toolbar.	Draws cone-pyramid.
132	Contents	ideCAD logo/Help	Opens the program's help document.
133	Continuous Arc Beam	Concrete/Concrete	Draws continuous arc beams.
134	Continuous Arc Wall	Home/Wall	Draws continuous arc walls.
135	Continuous Beam Connection	Steel/Macro/Single Plate Connection	Creates a continuous beam connection.
136	Continuous Slab Edge	Concrete/Concrete/Slab Edge	Draws continuous slab edges.
137	Continuous Zone Edge	It is located in the zone edge toolbar.	Draws continuous zone edges.
138	Contour Lines	Home/Axis/Axis	Sets contours of the drawing.
		Concrete/Axis/Axis
		Steel/Axis/Axis
139	Copy	Home/Edit	Copies entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
140	Copy Contour	Tools/Edit	Copies contours of a drawing.
141	Copy To File	Tools/File Sharing	Copies entities to a .blk file.
142	Cordon	Facade/3D Geometric Objects	Draws cordon.
143	Cordon Settings	Facade/3D Geometric Objects/Cordon	Opens cordon settings.
144	Corner Aligned Column	It is located in the column toolbar.	Sets corner aligned column.
145	Corner Aligned Single Footing	It is located in the single footing toolbar.	Sets corner aligned single footing.
146	Crane	Steel/Macro	Draws crane.
147	Crane Connection	Steel/Macro/Single Plate Connection	Creates a crane connection.
148	Create Camera	Right click menu in the perspective view	Creates camera.
149	Create Clip Plane	View/Workplane	Creates a clip plane.
150	Create New Layout	Drawings/Layout Design	Creates a new layout window.
151	Create New Selection Group	Right click menu	Creates new selection groups.
152	Create New Stair	Home/Concrete/Stair	Creates a new stair.
		Concrete/Concrete/Stair
153	Create User Defined Hatch	It is located in the hatch toolbar.	Creates user defined hatch from block objects.
154	Curtain Wall	Facade/Exterior Facade	Draws curtain wall.
155	Curtain Wall Dio	Facade/Exterior Facade/Curtain Wall	Draws curtain wall dio.
156	Curtain Wall Settings	Facade/Exterior Facade/Curtain Wall	Opens curtain wall settings.
157	Curve Beam	Concrete/Concrete	Draws curve beam.
158	Curve Slab Edge	Concrete/Concrete/Slab Edge	Draws curve slab edge.
159	Curve Wall	Home/Wall	Draws curve wall.
160	Curve Zone Edge	It is located in the zone edge toolbar.	Draws curve zone edge.
161	Curve To Beam	Modify/Transform/Beam to Shearwall	Converts circle, arc, ellipse objects to beam.
162	Curve To Shearwall	Modify/Transform/Beam to Shearwall	Converts circle, arc, ellipse objects to shearwall.
163	Curve to Wall	Modify/Transform/Beam to Shearwall	Converts circle, arc, ellipse objects to wall.
164	Customize	Right-click on any point of the vertical toolbar	Customize the vertical toolbar and the customizable toolbar on the top edge.
165	Cylinder	It is located in the tubes toolbar.	Draws cylinder.
166	DIN277 Report	Tools/Quantity Report	Creates DIN277 report.
167	DWG/DXF	Tools/Import-Export/Import	Imports DWG DXF file formats.
168	DWG/DXF/DWF	Tools/Import-Export/Export	Exports to DWG DXF DWF file formats.
169	DWG/DXF/DWF single	Tools/Import-Export/Export	Exports to DWG DXF DWF file formats.
170	Default Aligned Column	It is located in the column toolbar.	Sets default aligned.
171	Default Single Footing	It is located in the single footing toolbar.	Sets default single footing.
172	Define CS Origin	Home/Snap	Defines temporary coordinate system origin.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
173	Define End Cut To Edge	Modify/Entity Edit/Sweep	Defines end cut to edge.
174	Define Inner Cut To Edge	Modify/Entity Edit/Sweep	Defines inner cut to edge.
175	Define Local Offset To Edge	Modify/Entity Edit/Sweep	Defines local offset to edge.
176	Define Offset To Edge	Modify/Entity Edit/Sweep	Defines offset to edge.
177	Deform Stair	Home/Concrete/Stair	Deforms stair.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
178	Delete	Home/Edit	Delete entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
179	Delete Group	It is located in the trim to roof toolbar.	Deletes trim group.
180	Delete Horizontal Plan Section	It is located in the horizontal plan section toolbar.	Deletes horizonal plan section.
181	Delete Old Entities on Mirror	It is located in the mirror toolbar.	Delete old entities on mirror.
182	Delete Primitives	It is located in the pool toolbar.	Delete primitives after pool creation.
183	Delete Roof Element	Home/Roof/Roof Details	Deletes roof element(s).
		Modify/Entity Edit/Roof
184	Delete Slab Hole	It is located in the slab for steels toolbar.	Deletes slab hole.
185	Delta	It is located in the wall toolbar.	Changes delta value.
		It is located in the beam toolbar.
		It is located in the shearwall toolbar.
		It is located in the ODT door/window toolbar.
		It is located in the strip footing toolbar.
186	Deselect All	Home/Edit	Deselects all entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
187	Design Components	Tools/Quantity Report	Design components.
188	Directional Light	Rendering/Lights-Camera	Draws directional light.
189	Directional Light Settings	Rendering/Lights-Camera/Directional Light	Directional light settings.
190	Display Vertical Frame	View/Workplane	Display a vertical frame.
191	Distance	Home/Reference	Calculates distance.
		Facade/Reference
		Concrete/Reference
		Steel/Reference
		Tools/Reference
		Drawings/Reference
192	Distribute by Drawing a Path	It is located in the distribute toolbar.	Distribute by drawing a path.
193	Distribute by Selecting an Edge of Entity	It is located in the distribute toolbar.	Distribute by selecting an edge of entity.
194	Distribute Entities	Home/Modify	Distrubutes the selected entities.
195	Distribute Horizontally	It is located in the distribute toolbar.	Distrubutes selected entities to the horizontally.
196	Distribute Object Center	It is located in the distribute toolbar.	Distribute selected entities to the object center.
197	Distribute Nearest Point	It is located in the distribute toolbar.	Distribute selected entities to the nearest point.
198	Distribute Vertically	It is located in the distribute toolbar.	Distrubute selected entities to the vertically.

		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
199	Divide	Home/Modify	Divides the objects to the desired number.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
200	Divide-Combine All Intersections	Steel/Steel/Steel Purlin	Divides and combines on all intersections.
201	Divide-Combine Single Intersection	Steel/Steel/Steel Purlin	Divides and combines on selected intersections.
202	Dome	Home/Roof	Draws dome.
203	Dome Gutter	Facade/3D Geometric Object	Draws dome gutter.
204	Dome Gutter Settings	Facade/3D Geometric Object/Dome Gutter	Opens dome gutter settings.
205	Dome Settings	Home/Roof/Dome	Opens dome settings.
206	Door / Window Settings	Home/Door-Window/Door-Window	Opens door/Window settings.
		Facade/Door-Window/Door-Window
207	Door/Window	Home/Door-Window	Draws Door/Window.
		Facade/Door-Window
208	Dormer	Home/Roof	Draws dormer.
209	Dormer Dio	Home/Door-Window	Draws dormer window.
		Home/Roof/Dormer
		Facade/Door-Window
210	Dormer Settings	Home/Roof/Dormer	Opens dormer settings.
211	Double Angle Connection	Steel/Macro/Single Plate Connection	Creates a double angle connection.
212	Double Plate Seating Connection	Steel/Macro/Single Plate Connection	Creates a double plate seating connection.
213	Double Vault	Steel/Macro/Truss	Draws Double Vault Truss.
214	Drafting Mode	Tools/Tools	Enters drafting mode.
215	Draw Line Weights	View/View	Draw line weights.
216	Draw in Fast Mode	Steel/Macro	Draws connection in fast mode.
217	Draw Similar Entity	Right click menu	Draws similar entity of the selected one.
218	Draw Single Steel Brace	It is located in the steel brace toolbar.	Draws single steel brace.
219	Draw Slab Hole	It is located in the slab for steels toolbar.	Draws slab hole.
220	Draw Steel Brace	It is located in the steel brace toolbar.	Draws steel brace elements.
221	Draw Steel Brace Multiple Elements	It is located in the steel brace toolbar.	Draws steel brace with multiple steel elements.
222	Drawing List	View/Window	Display drawing list.
		Drawings/Window
223	Drawings	View/Window	Arrange drawings in the project.
224	Draws Curtain Wall Dio	Home/Door-Window	Draws curtain wall dio.
225	Eaves Haunch	Steel/Macro/Single Plate Connection	Creates a eaves haunch connection.
226	Edge Aligned Single Footing	It is located in the single footing toolbar.	Sets edge aligned single footing.
227	Edit Curtain Wall Item	Facade/Exterior Facade/Curtain Wall	Edits curtain wall item.
228	Edit Door/Window Angles	It is located in the ODT Door/Window toolbar.	Edits door/window angle.
229	Edit Label Text	Modify/Entity Edit/Dimension	Edit label text.
230	Edit Material	Rendering/Render	Edits material of an object.
231	Edit Railing Elevations	Home/Entities/Railing	Edits railing elevations.
		Facade/Railing/Railing
232	Edit Slab Edge	It is located in the slab for steels toolbar.	Edit slab edge.
233	Edit Stair	Modify/Entity Edit/Stair	Edit stair.
234	Edit Surface Mapping	Rendering/Render	Edits surface mapping parameters.
235	Edit Text	Modify/Entity Edit	Edit text.
		Drawings/Text
236	Edit Walls	Modify/Entity Edit/Wall	Edit walls.
237	Elevation Line	Home/Terrain/Terrain Polygon	Draws elevation line for terrain.
238	Elevation Line	Drawings/Tools	Draws elevation line for elevation.
239	Elevation Line Settings	Drawings/Tools/Elevation Line	Elevation line settings.
240	Elevation Point	Home/Terrain/Terrain Polygon	Draws elevation point.
241	Ellipse Center-Corner	Drawings/Primitives/Ellipse Corners	Draws ellipse using center and corner.
242	Ellipse Corner	Drawings/Primitives	Draws ellipse using corner.
243	Ellipse Mid-Axis	Drawings/Primitives/Ellipse Corners	Draws ellipse using midpoint and axis.
244	Elliptical Arc Center-Corner	Drawings/Primitives/Ellipse Corners	Draws elliptical arc using center and corner.
245	Elliptical Arc Corners	Drawings/Primitives/Ellipse Corners	Draws elliptical arc using corners.
246	Elliptical Arc Mid-Axis-Angles	Drawings/Primitives/Ellipse Corners	Draws elliptical arc using midpoint and axis.
247	End Plate Shear Connection	Steel/Macro/Single Plate Connection	Creates an end plate shear connection.
248	End Plate Truss Connection	Steel/Macro/Single Plate Connection	Creates an end plate truss connection.
249	End Plate Truss Connection For Box/Tube	Steel/Macro/Single Plate Connection	Creates an end plate truss connection for box/tube.
250	Enter	Keyboard	Runs the command. It has functions in various command stages.
251	Entity From Primitives	Tools/Generate	Entity from primitives.
252	Entity Properties	Home/Modify	Changes entity properties.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Modify/Entities
		Drawings/Modify
253	Esc	Keyboard	Exits the found command.
254	Exchange Coordinates	It is located in the single footing toolbar.	Exchange coordinates.
255	Exit	ideCAD logo	Quits the application.
256	Explode	Home/Modify	Separates the blocks into sub-blocks.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
257	Explode Roof	Modify/Entity Edit/Roof	Explodes roof.
258	Explode Into Single Elements	It is located in the steel beam toolbar.	Explodes and groups multi-element entities into single elements.
		It is located in the steel purlin toolbar.
259	Export To AMP	Tools/Quantity Report/Export	Exports components as a database file To AMP.
260	Export To OSKA	Tools/Quantity Report/Export	Exports components as a database file To OSKA.
261	Extend	Home/Modify	Line extends primitive objects such as arcs to another line or arc.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
262	Exterior Veneer	Facade/Exterior Facade	Draws exterior veneer.
263	Exterior Veneer Settings	Facade/Exterior Facade/Exterior Veneer	Exterior veneer settings.
264	Extruded Object	Home/Entities/3D Objects	Draws extruded object.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
265	FasciaBoard	Home/Roof/Roof Details	Draws fascia boards.
266	Fast Move	Home/Modify	Activates fast move.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
267	Fillet	Home/Modify	It connects two lines with an arc.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
268	Find & Replace	Tools/Tools	Finds entities based on their labels and change the labels.
269	Find Hatch Holes	It is located in the hatch toolbar.	Finds hatch holes.
270	Find in Perspective	Right click menu in perspective view	Finds the selected object which is in the plan window, in the perspective window and zooms the view to that object.
271	Find in Plan	Right click menu in plan view	Finds the selected object which is in the perspective window, in the plan window and zooms the view to that object.
272	Flange Plate Connection	Steel/Macro/Single Plate Connection	Creates a flange plate connection.
273	Flat	Steel/Macro/Truss	Draws Flat Truss.
274	Fly Mode	Right click menu in perspective view	Opens fly mode.
275	Formatted Text	Drawings/Text	Draws formatted text.
276	Free Dimension	Drawings/Dimension	Draws free dimension.
277	Free Dimension Settings	Drawings/Dimensions/Free Dimension	Opens free dimension settings.
278	Free Drawn	It is located in the sweep toolbar.	Sets free drawn.
279	Freehand	Drawings/Primitives	Draws freehand curve.
280	Free Mode Slab	Concrete/Concrete/Slab	Creates a free mode slab by selecting boundary entities manually.
281	Free Mode Zone	Home/Zone/Zone	Creates a free mode zone by selecting boundary entities manually.
282	Front	View/Perspective	Changes view to front.
283	General Sweep Settings	Facade/3D Geometric Object	Sweep settings.
284	Generate 2D Drawing	Tools/Generate	Generates a 2D simple drawing using current drawing.
		Drawings/Tools
285	Generate Vector Drawing	Tools/Generate	Generates vector drawing.
		Rendering/Tools
286	Get Elevation From Terrain	It is located in the terrain toolbar.	Get elevation from terrain.
287	Get Entity Settings	Home/Modify	Picks settings from entity.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Modify/Entities
		Drawings/Modify
288	Get Selection	Tools/Selection Groups	Gets currently selected entities.
289	Girt Connection	Steel/Macro/Single Plate Connection	Creates a girt connection.
290	Grid & Limits	View/View	Grid & limits settings.
291	Group List	Tools/Selection Groups	Groups selected entities and selects entities based on these groups.
292	Hall	Steel/Macro	Creates hall.
293	Hall Macro Settings	Steel/Macro/Hall	Opens the hall settings.
294	Hand Rail	Steel/Macro	Creates steel hand rail.
295	Hand Rail Macro Settings	Steel/Macro/Hand Rail	Opens the hand rail settings.
296	Hatch Hole	Drawings/Hatch	Draws hatch hole.
297	Hatch Settings	Drawings/Hatch/User Defined Hatch	Hatch settings.
298	Haunch	Steel/Macro/Single Plate Connection	Creates a haunch connection.
299	Hidden Line	View/View/Solid with Edges	Changes view detail to hidden line.
300	Hidden Line - Black & White	View/View	Changes view detail to hidden line black && white.
301	Hide/Filter Object	Right click menu	Removes all selected entities in the 3D view.
302	Hide/Show Edge	Modify/Entity Edit/Sweep	Hides/shows edge.
303	Hide/Show Edge Part	Modify/Entity Edit/Sweep	Hides/shows edge part.
304	Hip/Valley Rafter	Home/Roof/Roof Details	Draws hip/valley rafters.
305	Hole	Home/Terrain	Draws hole.
306	Horizontal Plan Section	Rendering/Tools	Opens horizontal plan section toolbar.
307	Horizontal Workplane	View/Workplane/Target Workplane	Creates a horizontal workplane.
308	IFC (Import)	Tools/Import-Export/Import	Imports IFC file. Merges file content with current project.
		ideCAD logo/Import
309	IFC (Export)	Tools/Import-Export/Export	Exports project to IFC.
		ideCAD logo/Export
310	II BV Report	Tools/Quantity Report	Creates II BV report.
311	Import Text	Drawings/Text	Imports text from a text file.
312	In background	Right click menu/Drawing order	Sends the selected object to the background.
313	In background of object	Right click menu/Drawing order	Sends the selected object behind a certain object.
314	In foreground	Right click menu/Drawing order	Sends the selected object to the foreground.
315	In foreground of object	Right click menu/Drawing order	Sends the selected object in front of a certain object.
316	Incline Objects	Modify/Entity Edit	Incline objects.
317	Include Beams	It is located in the dimension toolbar.	Includes beams into section dimension.
318	Include Details	It is located in the dimension toolbar.	Includes doors/windows into section dimension.
319	Include Slabs	It is located in the dimension toolbar.	Includes slabs into section dimension.
320	Inner Dimension	Drawings/Dimensions	Draws inner dimension.
321	Inner Dimension Settings	Drawings/Dimensions/Free Dimension	Opens inner dimension settings.
322	Input Units	Settings/Project Settings	Opens input units.
323	Insert Layout Block	Drawings/Layout Design/Create New Layout	Inserts a layout block.
324	Insertion Point	Home/Concrete/Stair	Changes insertion point.
		Concrete/Concrete/Stair
		It is located in the ODT door/window toolbar.
		It is located in the stair toolbar.
		It is located in the library toolbar.
325	Intersection Dimension	Drawings/Dimensions	Draws intersection dimension.
326	Invert Selection	Home/Edit	Inverts current selection.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
327	ideCAD Home	ideCAD logo	Opens the start page.
328	Jamb	Home/Door-Window/Door-Window	Draws jamb.
		Facade/Exterior Veneer
		Facade/Door-Window/Door-Window
329	Jamb Settings	Facade/Exterior Veneer/Jamb	Opens jamb settings.
330	Join	Home/Modify	Joins linear objects.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
331	Joining Plates Connection	Steel/Macro/Single Plate Connection	Creates a beam-beam connection (Joining plates).
332	L (Coordinate Box)	Coordinate Box	L enters the coordinate box. Object length is entered.
333	Label	Drawings/Dimension	Draws label.
334	Label Entities	Modify/Entity Edit	Label entities.
335	Lap Siding	It is located in the exterior veneer toolbar.	Draws lap siding.
336	Lap Siding with Gap	It is located in the exterior veneer toolbar.	Draws lap siding with gap.
337	Last Selection	Home/Edit	Selects last selected entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
338	Lath	Home/Roof/Roof Details	Draws laths.
339	Layer	Settings/Element Properties	Opens layer settings.
340	Layer Settings	Right click menu on the plan view.	Opens layer settings.
341	Layout Settings	Drawings/Layout Design/Create New Layout	Changes settings of current layout.
342	Left	View/Perspective	Changes view to left.
343	Left Middle Aligned Column	It is located in the column toolbar.	Sets edge left middle aligned.
344	Left Side	It is located in the dimension toolbar.	Left side section dimension.
345	Level Dimension	Drawings/Dimension	Draws level dimension.
346	Level Dimension Settings	Drawings/Dimensions/Level Dimension	Opens level dimension settings.
347	Library	Home/Entities	Draws library.
		Rendering/3D Geometric Objects
		Drawings/Primitives
348	Library Settings	Home/Entities/Library	Draws library settings.
		Rendering/3D Geometric Objects/Library
		Drawings/Primitives/Library
349	Load Settings	Settings/Project Settings	Loads settings from a file.
350	Local Undo	Tools/Edit	Local undo, undo for current mode only.
351	Lock/Unlock Layers	Modify/Layers	Locks/Unlocks layers.
352	Lock Entity Layer	Right Click Menu	Lock the layer of the object.
353	Make Block	Home/Modify	Blocks entities.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
354	Make Compatible With Structural/Architectural	Tools/Edit	Make architectural file compatible with structural.
355	Materials	Settings/Element Properties	Materials are listed, edited, created.
		Rendering/Render
356	Menu	Settings/Menu Settings	Opens menu settings.
357	Metal Slab	Steel/Steel/Composite Slab	Draws metal slab.
358	Midpoint	Home/Snap	Snaps to midpoints of entities.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
359	Mirror	Home/Modify	Takes symmetry.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
360	Mirror Door/Window Label	It is located in the ODT door/window toolbar.	Mirrors door/window labels.
361	Mirror X	It is located in the ODT door/window toolbar.	Takes symmetry with respect to the X-axis.
		It is located in the column toolbar.
		It is located in the strip footing toolbar.
362	Mirror Y	Home/Concrete/Stair	Takes symmetry with respect to the Y-axis.
		Concrete/Concrete/Stair
		It is located in the ODT door/window toolbar.
363	Modify Truss Elements	It is located in the trusses toolbar.	Allow modify sub elements of truss.
364	Move	Home/Modify	Move.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
365	Move Axis Label	Home/Axis/Axis	Moves axis label.
		Concrete/Axis/Axis
		Steel/Axis/Axis
		Modift/Entity Edit
366	Move Dimension Text	Modify/Entity Edit/Dimension	Moves dimension texts.
367	Move Raft Foundation Text	It is located in the raft foundation toolbar.	Moves raft foundation text.
368	Move Slab Text	Modify/Entity Edit/Slab	Moves slab text.
369	Move Stair Text	Home/Door-Window/Stair	Moves stair text.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
370	Move Zone Text	Modify/Entity Edit/Zone	Moves zone text.
371	Multi Stiffener Plate	Steel/Macro/Single Plate Connection	Creates multi stiffener plates.
372	Multi Stiffener Plate (Horizontal)	Steel/Macro/Single Plate Connection	Creates horizontal multi stiffener plates.
373	Multiple Lines	Drawings/Primitives	Draws multiple lines.
374	Nearest Point	Home/Snap	Snaps to nearest points of entities.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
375	New	ideCAD logo	Opens the new project open dialog.
376	New 2D Window	ideCAD logo	Creates a new, empty 2D drawing window.
377	New Horizontal Plan Section	It is located in the horizontal plan section toolbar.	Adds new horizontal plan sections.
378	New Project	ideCAD logo	Creates a new project.
379	New Layout Block-All Drawing	Drawings/Layout Design/Create New Layout	Creates a new layout block using all drawing.
380	New Layout Block-Circle	Drawings/Layout Design/Create New Layout	Creates a new layout block
381	New Layout Block-Path Polygon	Drawings/Layout Design/Create New Layout	Creates a new layout block
382	New Layout Block-Polygon	Drawings/Layout Design/Create New Layout	Creates a new layout block
383	New Layout Block-Rectangle	Drawings/Layout Design/Create New Layout	Creates a new layout block
384	New Trim Group	It is located in the trim to roof toolbar.	Add new trim group.
385	Next Window	View/Window	Activates next window.
386	Node Settings	View/Nodes	Opens node settings.
387	Notched Seating Connection	Steel/Macro/Single Plate Connection	Creates a notched seating connection.
388	NURBS	Drawings/Primitives	Draws NURBS curve.
389	Offset	Home/Modify	Offset.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
390	OK	It is located in the section toolbar.	Finishes the current job.
391	Open	ideCAD logo	Opens a previously saved project.
392	Ortho	Home/Snap	Enters orthogonal drawing mode.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
393	Outer Dimension	Drawings/Dimensions	Draws outer dimension.
394	Outer Dimension Settings	Drawings/Dimensions/Free Dimension	Opens outer dimension settings.
395	Page Down	Keyboard	Scrolls down the page in reports. Also shifts the viewpoint down in fly mode in the perspective view.
396	Page Up	Keyboard	Scrolls the page up in reports. Also shifts the viewpoint upwards in flight mode in the perspective view.
397	Pan	View/Zoom	Pans the window.
398	Parallel Reference	Home/Snap	Parallel reference.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
399	Paste	Home/Edit	Paste entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
400	Path	Drawings/Primitives	Draws path primitives.
401	Path Based	It is located in the sweep toolbar.	Sets path based.
402	Pattern Path	Drawings/Primitives	Draws pattern path.
403	Parametric Hatch	Drawings/Hatch	Draws parametric hatch.
404	Parent Based	It is located in the sweep toolbar.	Sets parent based.
405	Paste Contour	Tools/Edit	Pastes contours.
406	Paste From File	Tools/File Sharing	Pastes entities from a .blk file.
407	PDF (Export)	Tools/Import-Export/Export	Exports To PDF.
		ideCAD logo/Export
408	Pen Color	Settings/Element Properties	Opens pen and color settings.
409	Perpendicular Reference	Home/Snap	Perpendicular reference.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
410	Perspective	View/Perspective	Changes view to perspective.
411	Photometric Light	Rendering/Lights-Camera	Draws photometric light.
412	Photometric Light Settings	Rendering/Lights-Camera/Photometric Light	Photometric light settings.
413	Plan Screenshot	Tools/Import-Export/Export	Saves the screen image as a bitmap file.
		ideCAD logo/Export
414	Planar Texture Mapper	Rendering/Render	Creates Planar Texutre Mapper Object.
415	Plateau	Home/Terrain	Draws plateau.
416	Plot	ideCAD logo	Plots your drawings.
417	Point Light	Rendering/Lights-Camera	Draws point light.
418	Point Light Settings	Rendering/Lights-Camera/Point Light	Point light settings.
419	Polar Array	Home/Edit	Creates copies of objects with rotation.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
420	Polar Tracking	Settings/Project Settings	Polar tracking.
421	Polygon Column	Home/Concrete/Column	Draws polygon column.
		Concrete/Concrete
422	Polygon To Plate Section	Modify/Transform/Beam to Shearwall	Transforms primitive entities to plate section.
423	Polygonal Sheeting	Steel/Steel/Sheeting	Draws sheeting polygon.
424	Pool	Home/Entities	Draws pool.
425	Pool Settings	Home/Entities/Pool	Opens pool settings.
426	Post	Home/Roof/Roof Details	Draws a post.
427	Preferences	Home/Project Settings	Opens preferences.
		Settings/Project Settings
428	Previous Window	View/Window	Activates previous window.
429	Profiles	Settings/Element Properties	Opens profiles
430	Project	Settings/Project Settings	Open project settings.
431	Project Save Settings	Settings/Project Settings	Open project save settings.
432	Project Settings	Home/Project Settings	Opens project settings.
		Concrete/Project Settings
		Steel/Project Settings
433	Purlin	Home/Roof/Roof Details	Draws purlins.
434	Purlin Connection	Steel/Macro/Single Plate Connection	Creates a purlin connection.
435	Quad Stiffener Plate	Steel/Macro/Single Plate Connection	Creates stiffener plates.
436	Quantity Report	Tools/Quantity Report	Generates a report of quantities in the project.
437	R Purlin	Steel/Steel/Steel Purlin	Draws R purlin.
438	Radius Dimension	Drawings/Dimension	Draws radius dimension.
439	Radius Dimension Settings	Drawings/Dimensions/Level Dimension	Opens radius dimension settings.
440	Raft	Concrete/Foundation	Draws raft foundation.
441	Raft Edge	Concrete/Foundation	Draws raft edge.
442	Raft Edge Settings	Concrete/Foundation/Raft Edge	Opens raft edge settings.
443	Raft Foundation Hole	Concrete/Foundation/Raft	Draws raft foundation hole.
444	Raft Foundation Settings	Concrete/Foundation/Raft	Opens raft foundation settings.
445	Rafter	Home/Roof/Roof Details	Draws rafters.
446	Railing	Home/Entities	Draws railing.
		Facade/Railing
447	Railing 3D	Home/Entities/Railing	Draws 3D railing.
448	Railing Over Objects	Home/Entities/Railing	Draws 3D railing over objects.
449	Railing Settings	Home/Entities/Railing	Opens railing settings.
		FacadeRailing/Railing
450	Rainwater Pipe	Home/Roof	Draws rainwater pipe.
451	Rainwater Pipe Settings	Home/Roof/Rainwater Pipe	Opens rainwater pipe settings.
452	Raster Image	Drawings/Primitives	Places a raster image file onto the drawing.
453	Recall Last Render	Rendering/Render	Recalls render with the last settings.
454	Rectangle	Drawings/Primitives/Multiple Lines	Draws a rectangle.
455	Rectangular Wall	Home/Wall	Draws 4walls as a rectangle.
456	Redo	Tools/Edit	Redo.
457	Remove End Cut Of Edge	Modify/Entity Edit/Sweep	Removes end cut of edge.
458	Remove From Selection Group	Right click menu	Removes objects from the group.
459	Remove Inner Cut Of Edge	Modify/Entity Edit/Sweep	Removes inner cut of edge.
460	Remove Local Offset Of Edge	Modify/Entity Edit/Sweep	Removes local offset of edge.
461	Remove Nodule	It is located in the space truss toolbar.	Removes a nodule from space truss.
462	Remove Offset Of Edge	Modify/Entity Edit/Sweep	Removes offset of edge.
463	Remove Point	It is located in the hatch toolbar.	Removes an existing point on the hatch.
464	Render	Rendering/Render	Renders active view.
465	Reset Dimension Texts	Modify/Entity Edit/Dimension	Resets dimension text displacements.
466	Reset Settings	Settings/Project Settings	Resets settings.
467	Revision Cloud	Drawings/Primitives	Draws revision cloud.
468	Revolved Object	Home/Entities/3D Objects	Draws revolved object.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
469	Right	View/Perspective	Changes view to right.
470	Right Side	It is located in the dimension toolbar.	Right side section dimension.
471	Rigid on Both Axis Base Plate	Steel/Macro/Single Plate Connection	Creates a rigid on both axis base plate connection.
472	Rigid on Strong Axis Base Plate	Steel/Macro/Single Plate Connection	Creates a rigid on strong axis base plate connection.
473	Roof	Home/Roof	Draws roof.
		Modify/Entity Edit
474	Roof Details	It is located in the roof toolbar.	Opens the roof details toolbar.
475	Roof Gutter	Facade/3D Geometric Object	Draws roof gutter.
476	Roof Gutter Settings	Facade/3D Geometric Object/Roof Gutter	Opens roof gutter settings.
477	Roof Hole	Home/Roof/Roof	Draws roof hole.
478	Roof Plane	Home/Roof/Roof	Draws roof plane.
479	Roof Settings	Home/Roof/Roof	Opens roof settings.
480	Roof Window	Home/Door-Window	Draws roof window.
		Home/Roof/Roof
		Facade/Door-Window
481	Rotate	Home/Modify	Rotate.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
482	Rotate Building	Home/Modify	Rotates the building.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Tools/Tools
		Drawings/Modify
483	Rotate Curtain Wall Item	Facade/Exterior Veneer/Curtain Wall	Rotates curtain wall panel.
484	Rotate Node	Home/Modify	Rotates node.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
485	Round Plate Tube Base Plate	Steel/Macro/Single Plate Connection	Creates a round plate tube base plate connection.
486	Save	ideCAD logo	Saves current project.
487	Save As	ideCAD logo	Save current project with a new name.
488	Save Compact	ideCAD logo	Saves compresed project file.
489	Save Old Version	ideCAD logo	Saves old version project file.
490	Save Screen Image	ideCAD logo	Saves the screen image as a bitmap file.
491	Save Settings	Settings/Project Settings	Saves settings to a file.
492	Save Stair	Home/Concrete/Stair	Saves stair.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
493	Scale	Home/Modify	Scales entities.
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
494	Scale by Referance	Home/Modify	Scales entities by referance.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
495	Seating Support Connection	Steel/Macro/Single Plate Connection	Creates a seating support connection(8).
496	Seating Truss Connection	Steel/Macro/Single Plate Connection	Creates a seating truss connection.
497	Seating Weld Connection	Steel/Macro/Single Plate Connection	Creates a seating weld connection.
498	Secondary Stair Deformation	Modify/Entity Edit/Stair	Secondary stair deformation.
499	Secondary Steel Beam	Steel/Steel	Draws secondary beam.
500	Section / Elevation List	Tools/Generate	Edit and generate sections and elevations.
		Drawings/Tools	Edit and generate sections and elevations.
501	Section Dimension	It is located in the dimension toolbar.	Draws single section dimension.
502	Section Dimension Group	It is located in the dimension toolbar.	Draws section dimension group.
503	Section Elevation	Drawings/Dimension	Draws section elevation.
504	Section Elevation Settings	Drawings/Tools	Opens section elevation settings.
505	Section Line	Drawings/Tools	Draws section line.
506	Section Line Settings	Drawings/Tools/Section Line	Opens section line settings.
507	Select All	Home/Edit	Selects all entitites.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
508	Select Analysis Part	Steel/Steel/Steel Purlin	Select purlins to add analysis.
509	Select Entity In All Stories	Home/Edit	Selects entity in all stories.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
510	Select Group of Object	Right click menu	Select the objects in the group.
511	Select Terrain and Child Entities	It is located in the terrain toolbar.	Selects terrain and child entities.
512	Set Auto Elevation	It is located in the library toolbar.	Set auto elevation.
513	Set Entity Settings	Home/Modify	Sets default settings to selected entities.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Modify/Entities
		Drawings/Modify
514	Set Hatch Reference	Modify/Entity Edit	Sets hatch reference point.
515	Set Local CS	Home/Snap	Sets new local coordinate system.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
516	Set Pool Cantilever Slab Properties	Home/Entities/Pool	Set pool cantilever slab properties.
		Modify/Entity Edit/Pool
517	Set Pool Surface Properties	Home/Entities/Pool	Set pool surface properties.
		Modify/Entity Edit/Pool
518	Set Pool Surface Slope	Home/Entities/Pool	Set pool surface slope.
		Modify/Entity Edit/Pool
519	Set Pool Wall Properties	Home/Entities/Pool	Set pool wall properties.
		Modify/Entity Edit/Pool
520	Set Selection	Tools/Selection Groups	Sets currently selected entities.
521	Set Steel Delta	It is located in the steel column toolbar.	Sets steel element delta.
		It is located in the steel beam toolbar.
522	Set Trim Algorithm	Modify/Entity Edit	Sets entity trim algorithm.
523	Set Wall Priority	Modify/Entity Edit	Sets priorities of wall at joints.
524	Shearwall	Home/Concrete	Draws shearwall.
		Concrete/Concrete
525	Shearwall Settings	Home/Concrete/Shearwall	Opens shearwall settings.
		Concrete/Concrete/Shearwall
526	Shearwall To Beam	Modify/Transform/Beam to Shearwall	Converts shearwalls to beams.
527	Sheeting	Steel/Steel	Draws sheeting over purlins.
528	Sheeting Between Elements	Steel/Steel/Sheeting	Draws sheeting between two elements.
529	Show Coordinate Box	View/View	Show coordinate box.
530	Show Safe Frame	Right click menu in the perspective view.	Shows the render boundaries before rendering.
531	Show Toolbars	View/View	Show toolbars.
532	Show/Hide Dimension Text	Modify/Entity Edit/Dimension	Shows/hides dimension text.
533	Show/Hide Layers	Modify/Layers	Show/hide entity layers.
534	Show/Hide Nodes	View/Nodes	Shows/hides nodes
535	Show/Hide Railing	Home/Concrete/Stair	Shows/hides railings.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
536	Simple Base Plate	Steel/Macro/Single Plate Connection	Creates a simple base plate connection.
537	Single	Concrete/Foundation	Draws single footing.
538	Single Angle Connection	Steel/Macro/Single Plate Connection	Creates a single angle connection.
539	Single Footing Settings	Concrete/Foundation/Single	Opens single footing settings.
540	Single Plate Connection	Steel/Macro/Single Plate Connection	Creates a single plate connection.
541	Single Plate Seating Connection	Steel/Macro/Single Plate Connection	Creates a single plate seating connection.
542	Single Purlin	Steel/Steel/Steel Purlin	Draws single steel purlin.
543	Single Secondary Steel Beam	It is located in the steel beam toolbar.	Draws single secondary beam.
544	Slab	Concrete/Concrete	Draws slab.
545	Slab Edge (Concrete)	Concrete/Concrete	Draws slab edge.
546	Slab Edge (Steel)	Steel/Steel/Composite Slab	Draws steel slab edge.
547	Slab Edge Settings	Concrete/Concrete/Slab Edge	Opens slab edge settings.
548	Slab Hole	Concrete/Concrete/Slab	Draws slab hole.
549	Slab Settings	Concrete/Concrete/Slab	Opens slab settings.
550	Sloping Flat	Steel/Macro/Truss	Draws Sloping Flat Truss.
551	Sloping Vault	Steel/Macro/Truss	Draws Sloping Vault Truss.
552	Snap to Grid	Home/Snap	Snap to grid.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
553	Snap to Nodes	Home/Snap	Snap to nodes.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
554	Solid	View/View	Changes view detail to solid.
555	Solid with Edges	View/View	Changes view detail to solid with edges.
556	Space	Keyboard	Moves the cursor to horizontal, vertical, and free axis drawing positions on axes. Changes the offset in commands such as wall, column, beam, shearwall. Skips a name in object labeling. Changes the insertion point in commands such as stair, library.
557	Space Purlin	Steel/Steel/Steel Purlin	Draws space purlin.
558	Space Truss	Steel/Macro	Draws space truss.
559	Spacer Plate Connection	Steel/Macro/Single Plate Connection	Creates a spacer plate connection.
560	Sphere	Home/Entities/3D Objects	Draws sphere.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
561	Splice Connection	Steel/Macro/Single Plate Connection	Creates a splice connection.
562	Spot Light	Rendering/Lights-Camera	Draws spotlight.
563	Spot Light Settings	Rendering/Lights-Camera/Spot Light	Opens spot light settings.
564	Stair	Home/Concrete	Draws stair.
		Concrete/Concrete
565	Stair (Steel)	Steel/Macro	Creates steel stair.
566	Stair Macro Settings	Steel/Macro/Stair	Opens the steel stair settings.
567	Stair Settings	Home/Concrete/Stair	Opens stair settings.
		Concrete/Concrete/Stair
568	Stay Connection	Steel/Macro/Single Plate Connection	Creates a stay connection.
569	Stay Connection (Secondary Beam)	Steel/Macro/Single Plate Connection	Craetes a stay connection (secondary beam).
570	Steel Beam	Steel/Steel	Draws steel beam.
571	Steel Brace	Steel/Steel	Draws steel brace.
572	Steel Column	Steel/Steel	Draws steel column.
573	Steel Column 2 Points	It is located in th steel column toolbar.	Draws steel column.
574	Steel Hand Rail Macro on Arc	Steel/Macro/Hand Rail	Creates steel hand rail on arc.
575	Steel Hand Rail Macro on Line	Steel/Macro/Hand Rail	Creates steel hand rail on line.
576	Steel Purlin	Steel/Steel	Draws steel purlin.
577	Steel Tie	Steel/Steel/Steel Purlin	Draws steel tie.
578	Stiffened End Plate Connection	Steel/Macro/Single Plate Connection	Creates a stiffened end plate connection.
579	Stiffened Shear Plate Connection	Steel/Macro/Single Plate Connection	Creates a stiffened shear plate connection.
580	Story	Settings/Project Settings	Arrange stories in the project.
581	Story Alignment Free	It is located in the sweep toolbar.	Sets story alignment free.
582	Story Bottom Aligned	It is located in the sweep toolbar.	Sets story bottom aligned.
583	Story Copy	Home/Project Settings	Copies all entities from a story to another story.
		Concrete/Project Settings
		Steel/Project Settings
		Tools/Edit
584	Story List	Home/Project Settings	Opens story list.
		Concrete/Project Settings
		Steel/Project Settings
		View/Window
		Drawings/Window
585	Story Settings	Home/Project Settings	Arrange stories in the project.
		Concrete/Project Settings
		Steel/Project Settings
586	Story Top Aligned	It is located in the sweep toolbar.	Sets story top aligned.
587	Stretch Node	Home/Modify	Stretch node.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
588	Strip	Concrete/Foundation	Draws multiple strip footings.
589	Strip Footing Settings	Concrete/Foundation/Strip	Opens strip footing settings.
590	Structural Design Mode	View/Mode	Enters structural design mode.
591	Strut	Home/Roof/Roof Details	Draws a strut.
592	Stub	Steel/Macro/Single Plate Connection	Creates stub.
593	Sub Region	Home/Terrain	Draws sub region.
594	Swap Side	It is located in the exterior veneer toolbar.	Swaps side.
595	Sweep	Home/Entities/3D Objects	Draws sweep.
		Facade/3D Geometric Objects/3D Objects
		Modify/Entity Edit
		Rendering/3D Geometric Objects
596	Sweep Operations	It is located in the sweep toolbar.	Opens the sweep operations toolbar.
597	Switch Windows	Drawings/Window	Returns to last story window.
598	T Plate Connection	Steel/Macro/Single Plate Connection	Creates a T plate connection.
599	Tangent	Home/Snap	Draws tangents.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
600	Target Workplane	View/Workplane	Creates a free workplane using existing objects.
601	Terra Cotta Siding	It is located in the exterior veneer toolbar.	Draws terra cotta siding.
602	Terrain Polygon	Home/Terrain	Draws terrain polygon.
603	Terrain Settings	Home/Terrain/Terrain Polygon	Opens terrain settings.
604	Text	Rendering/3D Geometric Objects/3D Text	Draws text.
		Drawings/Text
605	Text Settings	Rendering/3D Geometric Objects/3D Text	Opens font settings.
		Drawings/Text/Text
606	Tip of the Day	ideCAD logo/Help	Shows tip of the day.
607	Toggle Axonometric View	Right click menu	Switches between perspective and axonometric views.
608	Toggle Fullscreen	View/Window	Resizes the view to full screen.
609	Top	View/Perspective	Changes view to perspective.
610	Transform To Ribbed Slab	Concrete/Concrete/Slab	Transforms a slab to a ribbed slab.
		Modify/Entity Edit/Slab
611	Transform To Waffle Slab	Concrete/Concrete/Slab	Transforms a slab to a waffle slab.
		Modify/Entity Edit/Slab
612	Transparent Story	View/View	Opens transparent story settings dialog.
613	Trapezoid Sloping Left	Steel/Macro/Truss	Draws Trapezoid Sloping Left Truss.
614	Trapezoid Sloping Right	Steel/Macro/Truss	Draws Trapezoid Sloping Right Truss.
615	Trapezoid Sloping Symmetric	Steel/Macro/Truss	Draws Trapezoid Sloping Symmetric Truss.
616	Trapezoid Slopping Asymmetric	Steel/Macro/Truss	Draws Trapezoid Slopping Asymmetric Truss.
617	Trapezoid Type 1	Steel/Macro/Truss	Draws Trapezoid Type 1 Truss.
618	Trapezoid Type 2	Steel/Macro/Truss	Draws Trapezoid Type 2 Truss.
619	Trapezoid Vault	Steel/Macro/Truss	Draws Trapezoid Vault Truss.
620	Triangular Asymmetric	Steel/Macro/Truss	Draws Triangular Asymmetric Truss.
621	Triangular Sloping Left	Steel/Macro/Truss	Draws Triangular Sloping Left Truss.
622	Triangular Sloping Right	Steel/Macro/Truss	Draws Triangular Sloping Right Truss.
623	Triangular Symmetric	Steel/Macro/Truss	Draws Triangular Symmetric Truss.
624	Trim	Home/Modify	Line cuts primitive objects such as arcs to another line or arc.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
625	Trim Column	Modify/Entity Edit/Column	Trims column edges with an axis or beam.
626	Trim To Roof	Home/Roof/Roof	Trims entities with roofs.
		Modify/Entity Edit/Roof
		Tools/Tools
627	Trim/Extend Wall	Home/Wall/Wall	Trims/extends walls.
		Modify/Entity Edit/Wall
628	Trimmer	Home/Roof/Roof Details	Draws a trimmer.
629	Truss	Steel/Macro	Draws Custom Truss.
630	Truss Connection	Steel/Macro/Single Plate Connection	Creates a truss connection.
631	Tube	Home/Entities/3D Objects	Draws tube.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
632	Tube Base Plate	Steel/Macro/Single Plate Connection	Creates a tube base plate connection.
633	Undo	Tools/Edit	Undo.
634	Unstiffened Seated Connection	Steel/Macro/Single Plate Connection	Creates an unstiffened seated connection.
635	Update Layout Block	Drawings/Layout Design/Create New Layout	Updates linked layout blocks.
636	Update Library Elevation	Home/Entities/Library	Update library elevation.
		Rendering/3D Geometric Objects/Library
637	Update Railing 3D	Home/Entities/Railing	Updates 3D railing.
		Rendering/Railing/Railing
638	Use Distance	It is located in the ODT door/window toolbar.	Use distance.
639	Use Dio Reference	It is located in the ODT door/window toolbar.	Use dio as reference.
640	User Defined Hatch	Drawings/Hatch	Draws user defined hatch.
641	User Defined Tube	It is located in the tubes toolbar.	Draws user defined tube.
642	Vault (Concrete)	Home/Roof	Draws vault.
643	Vault (Steel)	Steel/Macro/Truss	Draws Vault Truss.
644	Vault Settings	Home/Roof/Vault	Opens vault settings.
645	Vertical Workplane	View/Workplane/Target Workplane	Creates a vertical workplane.
646	View Settings	View/View	Opens view settings.
647	Viewport Configuration	View/Window	Display view configuration options.
648	Wall	Home/Wall	Draws wall.
		Modify/Wall
649	Wall Based	It is located in the sweep toolbar.	Sets wall based.
650	Wall Settings	Home/Wall/Wall	Opens wall settings.
651	Wavefront .OBJ (Import)	Tools/Import-Export/Import	Import .obj files.
		ideCAD logo/Import
652	Wavefront.OBJ (Export)	Tools/Import-Export/Export	Exports to OBJ file format.
		ideCAD logo/Export
653	Welded Box/Tube Connection	Steel/Macro/Single Plate Connection	Creates a welded box/tube connection.
654	Welded Connection	Steel/Macro/Single Plate Connection	Creates Welded Connection.
655	Welded Flange Plate Connection	Steel/Macro/Single Plate Connection	Creates a welded flange plate connection.
656	Welded Web Connection	Steel/Macro/Single Plate Connection	Creates a welded web connection.
657	Wind Connection	Steel/Macro/Single Plate Connection	Creates a wind connection.
658	X (Coordinate Box)	Coordinate Box	Enters the X coordinate box. X coordinate is entered.
659	Y (Coordinate Box)	Coordinate Box	Enters the Y coordinate box. Y coordinate is entered.
660	Zone	Home/Zone	Draws zone.
		Modify/Entity Edit
661	Zone Edge	Home/Zone	Draws zone edge.
662	Zone Hole	Home/Zone	Draws zone hole.
663	Zone List	Home/Zone	Draws zone list.
664	Zone Edge Settings	Home/Zone/Zone Edge	Opens zone edge settings.
665	Zone Hole Settings	Home/Zone/Zone Hole	Opens zone hole settings.
666	Zone List Settings	Home/Zone/Zone List	Opens zone list settings.
667	Zone Settings	Home/Zone/Zone	Opens zone settings.
668	Zoom	View/Zoom	Zooms the window.
669	Zoom Extents	View/Zoom	Zooms to the extents of the drawings.
670	Zoom Selection	View/Zoom	Zoom selection.
671	Zoom Window	View/Zoom	Zoom into a rectangular window.
672	Zoom In (+)	Keyboard	Zooms in.
673	Zoom Out (-)	Keyboard	Zooms out.

...

Versions Compared

Old Version 66

New Version 67

Key