The list of commands available in the ideCAD Architectural package program is given below in alphabetical order (Base version: 11.0211).
Command | Location of command in ribbon menu or toolbar | Explanation | |
1 | Tools/Import-Export/Import | Imports 3D Block. | |
| ideCAD logo/Import |
| |
2 | Tools/Import-Export/Export | Exports 3D Block. | |
| ideCAD logo/Export |
| |
| ideCAD logo/Export |
| |
3 | Facade/Railing | Draws 3D railing over objects. | |
4 | Facade/Railing | Draws 3D railing. | |
5 | Rendering/3D Geometric Objects | Draws 3d text. | |
6 | Tools/Import-Export/Export | Exports to 3DS file format. | |
| ideCAD logo/Export |
| |
7 | Tools/Import-Export/Import | Imports 3DS file format. | |
| ideCAD logo/Import |
| |
8 | View/Workplane/Target Workplane | Creates a workplane through 3 points. | |
9 | Steel/Macro/Single Plate Connection | Creates a 4 bolts stiffened end plate | |
910 | Steel/Macro/Single Plate Connection | Creates a 4 bolts unstiffened end plate connection. | |
1011 | Steel/Macro/Single Plate Connection | Creates a 8 bolts stiffened end plate connection. | |
1112 | About ideCAD Architectural | ideCAD logo/Help | It gives the program version and usage license information. |
1213 | Home/Snap | Uses defined local coordinate system. | |
| Facade/Snap |
| |
| Concrete/Snap |
| |
| Steel/Snap |
| |
| Drawings/Snap |
| |
1314 | Right click menu in perspective view | Creates snap points on a line in a perspective image. | |
1415 | It is located in the trim to roof toolbar. | Adds new entities to the trim group. | |
1516 | It is located in the hatch toolbar. | Adds lines to the hatch edges. | |
1617 | It is located in the hatch toolbar. | Add a new point to hatch. | |
1718 | It is located in the trim to roof toolbar. | Adds roof to the trim group. | |
1819 | Home/Concrete/Stair | Adds stair area to an existing stair. | |
| Concrete/Concrete/Stair |
| |
1920 | Right click menu | Adds new objects to the groups | |
2021 | Modify/Entity Edit/Dimension | Adds/removes dimension parents. | |
2122 | Home/Edit | Generates array of entities. | |
| Facade/Edit |
| |
| Concrete/Edit |
| |
| Steel/Edit |
| |
| Drawings/Edit |
| |
2223 | Home/Snap | Enables advanced snap mode. | |
| Facade/Snap |
| |
| Concrete/Snap |
| |
| Steel/Snap |
| |
| Drawings/Snap |
| |
2324 | Settings/Menu Settings | Edits commands used on the command line. | |
2425 | It is located in the align toolbar. | Aligns the selected entities at the bottom. | |
2526 | It is located in the align toolbar. | Aligns the selected entities by drawing a path. | |
2627 | It is located in the align toolbar. | Align the selected entities by selecting an edge of entity. | |
2728 | Home/Modify | Aligns the selected entities. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
2829 | It is located in the align toolbar. | Aligns the selected entities to the left. | |
2930 | It is located in the align toolbar. | Aligns the selected entities to the object center. | |
3031 | It is located in the align toolbar. | Aligns the selected entities to the nearest point. | |
3132 | It is located in the align toolbar. | Aligns the selected entities to the right. | |
3233 | It is located in the align toolbar. | Aligns the selected entities to the top. | |
3334 | Home/Reference | Measures the angle. | |
| Facade/Reference |
| |
| Concrete/Reference |
| |
| Steel/Reference |
| |
| Tools/Reference |
| |
| Drawings/Reference |
| |
3435 | Drawings/Dimension | Draws angle dimension. | |
3536 | Drawings/Dimensions/Level Dimension | Opens angle dimension settings. | |
3637 | It is located in the library toolbar. | Sets vertical angle of library automatically using underlying geometry. | |
3738 | Steel/Macro/Single Plate Connection | Creates a apex type connection. | |
3839 | It is located in the primitives toolbar. | Draws arc. | |
3940 | Home/Axis | Draws arc axis. | |
| Concrete/Axis |
| |
| Steel/Axis |
| |
4041 | Home/Axis | Draws arc axis through 3 points. | |
| Concrete/Axis |
| |
| Steel/Axis |
| |
4142 | Concrete/Concrete | Draws arc beam. | |
4243 | Home/Roof/Dome | Draws arc dome. | |
4344 | Home/Roof/Dome | Draws arc dome through 3 points. | |
4445 | Concrete/Concrete/Slab Edge | Draws arc slab edge. | |
4546 | It is located in the primitives toolbar. | Draws arc through 3 points. | |
4647 | It is located in the wall toolbar. | Draws arc wall. | |
4748 | It is located in the zone edge toolbar. | Draws arc zone edge. | |
4849 | Home/Reference | Calculates area. | |
| Facade/Reference |
| |
| Concrete/Reference |
| |
| Steel/Reference |
| |
| Tools/Reference |
| |
| Drawings/Reference |
| |
4950 | Home/Edit | Generates an array of entities. | |
| Facade/Edit |
| |
| Concrete/Edit |
| |
| Steel/Edit |
| |
| Drawings/Edit |
| |
5051 | Rendering/Render | Continously assigns selected material to face groups. | |
5152 | Modify/Entity Edit | Auto label entities. | |
| Tools/Tools |
| |
5253 | It is located in the hatch toolbar. | Creates hatch with closed polygons. | |
5354 | Home/Axis | Draws axis. | |
| Concrete/Axis |
| |
| Steel/Axis |
| |
5455 | Modify/Entity Edit/Move Axis Label | Sets the axis border. | |
5556 | It is located in the axis toolbar. | Draws an axis with an offset to the previous axis drawn. | |
5657 | Home/Axis/Axis | Opens axis settings. | |
| Concrete/Axis/Axis |
| |
| Steel/Axis/Axis |
| |
5758 | View/Perspective | Changes view to axonometric. | |
5859 | View/Perspective | Changes view to back. | |
5960 | View/View | Opens background settings. | |
6061 | It is located in the sweep toolbar. | Draws baseboard. | |
6162 | Concrete/Concrete | Draws multiple beams. | |
6263 | Concrete/Concrete/Beam | Opens beam settings. | |
6364 | Modify/Transform | Converts beams to shearwalls. | |
6465 | Facade/Exterior Facade/Curtain Wall | Bends curtain wall. | |
6566 | Drawings/Primitives/NURBS | Draws bezier curve. | |
6667 | Drawings/Hatch | Draws bitmap hatch. | |
6768 | Steel/Macro/Single Plate Connection | Creates a bolted flange plate connection. | |
6869 | It is located in the sweep toolbar. | Draws border on wall. | |
6970 | Home/Roof/Vault | Draws border vault. | |
7071 | View/Perspective | Changes view to bottom. | |
7172 | Home/Entities/3D Objects | Draws box. | |
| Facade/3D Geometric Objects/3D Objects |
| |
| Rendering/3D Geometric Objects |
| |
7273 | Steel/Macro/Single Plate Connection | Creates box/tube cap plate. | |
7374 | Steel/Macro/Single Plate Connection | Creates a box/tube end plate connection. | |
7475 | Steel/Macro/Single Plate Connection | Creates a box/tube seating connection. | |
7576 | Steel/Macro/Single Plate Connection | Creates a box/tube splice connection. | |
7677 | Steel/Macro/Single Plate Connection | Creates a brace center connection(9). | |
7778 | Steel/Macro/Single Plate Connection | Creates a brace corner connection(10). | |
7879 | Home/Modify | Breaks off a certain part of the objects. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
7980 | Tools/BUA/FAR Reports | Creates GRZ/GFZ report. | |
8081 | Home/Axis/Axis | Calculates contour polygon. | |
| Concrete/Axis/Axis |
| |
| Steel/Axis/Axis |
| |
| Modify/Entity Edit/Move Axis Label |
| |
8182 | Rendering/Lights-Camera | Draws camera. | |
8283 | Rendering/Render | Creates camera animaton. | |
8384 | Rendering/Render | Draws camera path. | |
8485 | Rendering/Lights-Camera/Camera | Opens camera settings. | |
8586 | Modify/Entity Edit/Stair | Cancels secondary stair deformation. | |
8687 | Modify/Entity Edit/Stair | Cancels stair deformations. | |
8788 | It is located in the sweep toolbar. | Draws ceiling cornice. | |
8889 | It is located in the column toolbar. | Sets center aligned. | |
8990 | It is located in the single footing toolbar. | Sets centered single footing. | |
9091 | Home/Modify | Connects two lines with a third line. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
9192 | Home/Axis | Changes axis drawing type. | |
| Concrete/Axis |
| |
| Steel/Axis |
| |
9293 | Home/Concrete/Stair | Changes baluster count. | |
| Concrete/Concrete/Stair |
| |
| Modify/Entity Edit/Stair |
| |
9394 | Modify/Entity Edit/Column | Changes column dimensions. | |
9495 | It is located in the ODT door/window toolbar. | Change dio distance point. | |
9596 | Modify/Entity Edit/Sweep | Change edge part end angles. | |
9697 | Modify/Layers | Changes layers of selected entities. | |
9798 | It is located in the jamb toolbar. | Changes jamb placement to the other side of dio. | |
9899 | Right click menu in plan view. | Changes layers of selected entities. | |
99100 | Home/Roof/Roof | Changes rafter dimensions. | |
| Modify/Entity Edit/Roof |
| |
100101 | Home/Roof/Roof Details | Changes roof edge properties. | |
| Modify/Entity Edit/Roof |
| |
101102 | Home/Concrete/Shearwall | Changes shearwall length. | |
102103 | It is located in the railing toolbar. | Changes path direction. | |
It is located in the curtain wall toolbar. | |||
103104 | ideCAD logo/Help | Check for updates. | |
104105 | Tools/Tools | Checks validity of project geometry. | |
105106 | Drawings/Primitives | Draws circle. | |
106107 | Concrete/Concrete/Beam | Draws circle beam. | |
107108 | Concrete/Concrete Slab Edge | Draws circle slab edge. | |
108109 | It is located in the wall toolbar. | Draws circle walls. | |
109110 | It is located in the zone edge toolbar. | Draws circle zone edge. | |
110111 | Home/Concrete/Column | Draws circular column. | |
| Concrete/Concrete | 111 | |
112 | Modify/Transform/Beam to Shearwall | Converts circular columns to rectangular columns. | |
Right click menu | |||
113 | Home/Edit | Clones (immediately copies) objects. | |
| Facade/Edit |
| |
| Concrete/Edit |
| |
| Steel/Edit |
| |
| Drawings/Edit |
| |
112114 | Close | ideCAD logo | Closes current project. |
113115 | Drawings/Primitives/NURBS | Draws closed bezier curve. | |
114116 | Right Click Menu | Closes the layer of the object. | |
115117 | Drawings/Primitives/NURBS | Draws closed NURBS curve. | |
116118 | Modify/Transform/Beam to Shearwall | Transforms primitive entities to polygon column. | |
117119 | Modify/Transform/Beam to Shearwall | Transforms primitive entities to polygon section. | |
118120 | Home/Roof/Roof Details | Draws a collar beam. | |
119121 | Home/Concrete | Draws rectangular column. | |
| Concrete/Concrete |
| |
120122 | Home/Concrete/Column | Opens column settings. | |
| Concrete/Concrete/Column |
| |
121123 | Home/Concrete/Column | Draws column support. | |
| Concrete/Concrete | 122 | |
124 | Modify/Transform/Beam to Shearwall | Converts columns to shearwalls. | |
Right click menu | |||
125 | Steel/Macro/Single Plate Connection | Creates a column-beam stiffened end plate connection. | |
123126 | Steel/Macro/Single Plate Connection | Creates a built up column connection. | |
124127 | Steel/Macro/Single Plate Connection | Creates a column-column end plate splice connection. | |
125128 | Steel/Macro/Single Plate Connection | Creates a column-foundation connection (Stiffened baseplate). | |
126129 | Tools/Quantity Report | Creates components report. | |
127130 | Settings/Element Materials | Constructs and arranges composite materials. | |
128131 | Steel/Steel | Draws composite slab. | |
129132 | Steel/Steel/Composite Slab | Draws composite solid slab. | |
130133 | Steel/Steel/Composite Slab | Draws concrete slab over steel beams. | |
131134 | It is located in the tubes toolbar. | Draws cone-pyramid. | |
132135 | Contents | ideCAD logo/Help | Opens the program's help document. |
133136 | Concrete/Concrete | Draws continuous arc beams. | |
134137 | Home/Wall | Draws continuous arc walls. | |
135138 | Steel/Macro/Single Plate Connection | Creates a continuous beam connection. | |
136139 | Concrete/Concrete/Slab Edge | Draws continuous slab edges. | |
137140 | It is located in the zone edge toolbar. | Draws continuous zone edges. | |
138141 | Home/Axis/Axis | Sets contours of the drawing. | |
| Concrete/Axis/Axis |
| |
| Steel/Axis/Axis |
| |
139142 | Home/Edit | Copies entities. | |
| Facade/Edit |
| |
| Concrete/Edit |
| |
| Steel/Edit |
| |
| Drawings/Edit |
| |
135143 | Tools/Edit | Copies contours of a drawing. | |
136144 | Tools/File Sharing | Copies entities to a .blk file. | |
137145 | Facade/3D Geometric Objects | Draws cordon. | |
138146 | Facade/3D Geometric Objects/Cordon | Opens cordon settings. | |
139147 | It is located in the column toolbar. | Sets corner aligned column. | |
140148 | It is located in the single footing toolbar. | Sets corner aligned single footing. | |
141149 | Steel/Macro | Draws crane. | |
142150 | Steel/Macro/Single Plate Connection | Creates a crane connection. | |
143151 | Right click menu in the perspective view | Creates camera. | |
144152 | View/Workplane | Creates a clip plane. | |
145153 | Drawings/Layout Design | Creates a new layout window. | |
146154 | Right click menu | Creates new selection groups. | |
147155 | Home/Concrete/Stair | Creates a new stair. | |
| Concrete/Concrete/Stair |
| |
148156 | It is located in the hatch toolbar. | Creates user defined hatch from block objects. | |
149157 | Facade/Exterior Facade | Draws curtain wall. | |
150158 | Facade/Exterior Facade/Curtain Wall | Draws curtain wall dio. | |
151159 | Facade/Exterior Facade/Curtain Wall | Opens curtain wall settings. | |
152160 | Concrete/Concrete | Draws curve beam. | |
153161 | Concrete/Concrete/Slab Edge | Draws curve slab edge. | |
154162 | Home/Wall | Draws curve wall. | |
155163 | It is located in the zone edge toolbar. | Draws curve zone edge. | |
156164 | Modify/Transform/Beam to Shearwall | Converts circle, arc, ellipse objects to beam. | |
157165 | Modify/Transform/Beam to Shearwall | Converts circle, arc, ellipse objects to shearwall. | |
166 | Modify/Transform/Beam to Shearwall | Converts circle, arc, ellipse objects to wall. | |
225167 | Right-click on any point of the vertical toolbar | Customize the vertical toolbar and the customizable toolbar on the top edge. | |
158168 | It is located in the tubes toolbar. | Draws cylinder. | |
159169 | Tools/Quantity Report | Creates DIN277 report. | |
160170 | Tools/Import-Export/Import | Imports DWG DXF file formats. | |
161171 | Tools/Import-Export/Export | Exports to DWG DXF DWF file formats. | |
162172 | Tools/Import-Export/Export | Exports to DWG DXF DWF file formats. | |
163172 | It is located in the column toolbar. | Sets default aligned. | |
164173 | It is located in the single footing toolbar. | Sets default single footing. | |
165174 | Home/Snap | Defines temporary coordinate system origin. | |
| Facade/Snap |
| |
| Concrete/Snap |
| |
| Steel/Snap |
| |
| Drawings/Snap |
| |
166175 | Modify/Entity Edit/Sweep | Defines end cut to edge. | |
167176 | Modify/Entity Edit/Sweep | Defines inner cut to edge. | |
168177 | Modify/Entity Edit/Sweep | Defines local offset to edge. | |
169178 | Modify/Entity Edit/Sweep | Defines offset to edge. | |
170179 | Home/Concrete/Stair | Deforms stair. | |
| Concrete/Concrete/Stair |
| |
| Modify/Entity Edit/Stair |
| |
171180 | Home/Edit | Delete entities. | |
| Facade/Edit |
| |
| Concrete/Edit |
| |
| Steel/Edit |
| |
| Drawings/Edit |
| |
181 | It is located in the trim to roof toolbar. | Deletes trim group. | |
172182 | It is located in the horizontal plan section toolbar. | Deletes horizonal plan section. | |
173183 | It is located in the mirror toolbar. | Delete old entities on mirror. | |
174184 | It is located in the pool toolbar. | Delete primitives after pool creation. | |
175185 | Home/Roof/Roof Details | Deletes roof element(s). | |
| Modify/Entity Edit/Roof |
| |
176186 | It is located in the slab for steels toolbar. | Deletes slab hole. | |
177187 | It is located in the wall toolbar. | Changes delta value. | |
| It is located in the beam toolbar. |
| |
| It is located in the shearwall toolbar. |
| |
| It is located in the ODT door/window toolbar. |
| |
| It is located in the strip footing toolbar. |
| |
178188 | Home/Edit | Deselects all entities. | |
| Facade/Edit |
| |
| Concrete/Edit |
| |
| Steel/Edit |
| |
| Drawings/Edit |
| |
179189 | Tools/Quantity Report | Design components. | |
180190 | Rendering/Lights-Camera | Draws directional light. | |
181191 | Rendering/Lights-Camera/Directional Light | Directional light settings. | |
182192 | View/Workplane | Display a vertical frame. | |
183193 | Home/Reference | Calculates distance. | |
| Facade/Reference |
| |
| Concrete/Reference |
| |
| Steel/Reference |
| |
| Tools/Reference |
| |
| Drawings/Reference |
| |
184194 | It is located in the distribute toolbar. | Distribute by drawing a path. | |
185195 | It is located in the distribute toolbar. | Distribute by selecting an edge of entity. | |
186196 | Home/Modify | Distrubutes the selected entities. | |
187197 | It is located in the distribute toolbar. | Distrubutes selected entities to the horizontally. | |
188198 | It is located in the distribute toolbar. | Distribute selected entities to the object center. | |
189199 | It is located in the distribute toolbar. | Distribute selected entities to the nearest point. | |
190200 | It is located in the distribute toolbar. | Distrubute selected entities to the vertically. | |
|
| ||
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
191201 | Home/Modify | Divides the objects to the desired number. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
192202 | Steel/Steel/Steel Purlin | Divides and combines on all intersections. | |
193203 | Steel/Steel/Steel Purlin | Divides and combines on selected intersections. | |
252204 | Home/Roof | Draws dome. | |
194205 | Facade/3D Geometric Object | Draws dome gutter. | |
195206 | Facade/3D Geometric Object/Dome Gutter | Opens dome gutter settings. | |
196207 | Home/Roof/Dome | Opens dome settings. | |
197208 | Home/Door-Window/Door-Window | Opens door/Window settings. | |
| Facade/Door-Window/Door-Window |
| |
198209 | Home/Door-Window | Draws Door/Window. | |
| Facade/Door-Window |
| |
199210 | Home/Roof | Draws dormer. | |
200211 | Home/Door-Window | Draws dormer window. | |
| Home/Roof/Dormer |
| |
| Facade/Door-Window |
| |
201212 | Home/Roof/Dormer | Opens dormer settings. | |
202213 | Steel/Macro/Single Plate Connection | Creates a double angle connection. | |
203214 | Steel/Macro/Single Plate Connection | Creates a double plate seating connection. | |
204215 | Steel/Macro/Truss | Draws Double Vault Truss. | |
205216 | Tools/Tools | Enters drafting mode. | |
206217 | View/View | Draw line weights. | |
207218 | Steel/Macro | Draws connection in fast mode. | |
208219 | Right click menu | Draws similar entity of the selected one. | |
209220 | It is located in the steel brace toolbar. | Draws single steel brace. | |
210221 | It is located in the slab for steels toolbar. | Draws slab hole. | |
211222 | It is located in the steel brace toolbar. | Draws steel brace elements. | |
212223 | It is located in the steel brace toolbar. | Draws steel brace with multiple steel elements. | |
213224 | View/Window | Display drawing list. | |
| Drawings/Window |
| |
214225 | View/Window | Arrange drawings in the project. | |
215226 | Home/Door-Window | Draws curtain wall dio. | |
216227 | Steel/Macro/Single Plate Connection | Creates a eaves haunch connection. | |
217228 | It is located in the single footing toolbar. | Sets edge aligned single footing. | |
218229 | Facade/Exterior Facade/Curtain Wall | Edits curtain wall item. | |
230 | It is located in the ODT Door/Window toolbar. | Edits door/window angle. | |
219231 | Modify/Entity Edit/Dimension | Edit label text. | |
220232 | Rendering/Render | Edits material of an object. | |
221233 | Home/Entities/Railing | Edits railing elevations. | |
| Facade/Railing/Railing |
| |
222234 | It is located in the slab for steels toolbar. | Edit slab edge. | |
223235 | Modify/Entity Edit/Stair | Edit stair. | |
224236 | Rendering/Render | Edits surface mapping parameters. | |
225237 | Modify/Entity Edit | Edit text. | |
| Drawings/Text |
| |
226238 | Modify/Entity Edit/Wall | Edit walls. | |
227239 | Home/Terrain/Terrain Polygon | Draws elevation line for terrain. | |
228240 | Drawings/Tools | Draws elevation line for elevation. | |
229241 | Drawings/Tools/Elevation Line | Elevation line settings. | |
230242 | Home/Terrain/Terrain Polygon | Draws elevation point. | |
231243 | Drawings/Primitives/Ellipse Corners | Draws ellipse using center and corner. | |
232244 | Drawings/Primitives | Draws ellipse using corner. | |
233245 | Drawings/Primitives/Ellipse Corners | Draws ellipse using midpoint and axis. | |
234246 | Drawings/Primitives/Ellipse Corners | Draws elliptical arc using center and corner. | |
235247 | Drawings/Primitives/Ellipse Corners | Draws elliptical arc using corners. | |
236248 | Drawings/Primitives/Ellipse Corners | Draws elliptical arc using midpoint and axis. | |
237249 | Steel/Macro/Single Plate Connection | Creates an end plate shear connection. | |
238250 | Steel/Macro/Single Plate Connection | Creates an end plate truss connection. | |
239251 | Steel/Macro/Single Plate Connection | Creates an end plate truss connection for box/tube. | |
240252 | Keyboard | Runs the command. It has functions in various command stages. | |
241253 | Tools/Generate | Entity from primitives. | |
242254 | Home/Modify | Changes entity properties. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Modify/Entities |
| |
| Drawings/Modify |
| |
243255 | Keyboard | Exits the found command. | |
244256 | It is located in the single footing toolbar. | Exchange coordinates. | |
245257 | Exit | ideCAD logo | Quits the application. |
246258 | Home/Modify | Separates the blocks into sub-blocks. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
247259 | Modify/Entity Edit/Roof | Explodes roof. | |
248260 | It is located in the steel beam toolbar. | Explodes and groups multi-element entities into single elements. | |
| It is located in the steel purlin toolbar. |
| |
249261 | Tools/Quantity Report/Export | Exports components as a database file To AMP. | |
250262 | Tools/Quantity Report/Export | Exports components as a database file To OSKA. | |
252263 | Home/Modify | Line extends primitive objects such as arcs to another line or arc. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
253264 | Facade/Exterior Facade | Draws exterior veneer. | |
254265 | Facade/Exterior Facade/Exterior Veneer | Exterior veneer settings. | |
255266 | Home/Entities/3D Objects | Draws extruded object. | |
| Facade/3D Geometric Objects/3D Objects |
| |
| Rendering/3D Geometric Objects |
| |
256267 | Home/Roof/Roof Details | Draws fascia boards. | |
257268 | Home/Modify | Activates fast move. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
258269 | Home/Modify | It connects two lines with an arc. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
259270 | Tools/Tools | Finds entities based on their labels and change the labels. | |
260271 | It is located in the hatch toolbar. | Finds hatch holes. | |
261272 | Right click menu in perspective view | Finds the selected object which is in the plan window, in the perspective window and zooms the view to that object. | |
262273 | Right click menu in plan view | Finds the selected object which is in the perspective window, in the plan window and zooms the view to that object. | |
263274 | Steel/Macro/Single Plate Connection | Creates a flange plate connection. | |
264275 | Steel/Macro/Truss | Draws Flat Truss. | |
265276 | Right click menu in perspective view | Opens fly mode. | |
266277 | Drawings/Text | Draws formatted text. | |
267278 | Drawings/Dimension | Draws free dimension. | |
340279 | Drawings/Dimensions/Free Dimension | Opens free dimension settings. | |
268280 | It is located in the sweep toolbar. | Sets free drawn. | |
269281 | Drawings/Primitives | Draws freehand curve. | |
270282 | Concrete/Concrete/Slab | Creates a free mode slab by selecting boundary entities manually. | |
271283 | Home/Zone/Zone | Creates a free mode zone by selecting boundary entities manually. | |
272284 | View/Perspective | Changes view to front. | |
273285 | Facade/3D Geometric Object | Sweep settings. | |
274286 | Tools/Generate | Generates a 2D simple drawing using current drawing. | |
| Drawings/Tools |
| |
275287 | Tools/Generate | Generates vector drawing. | |
| Rendering/Tools |
| |
276288 | It is located in the terrain toolbar. | Get elevation from terrain. | |
277289 | Home/Modify | Picks settings from entity. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Modify/Entities |
| |
| Drawings/Modify |
| |
278290 | Tools/Selection Groups | Gets currently selected entities. | |
279291 | Steel/Macro/Single Plate Connection | Creates a girt connection. | |
280292 | View/View | Grid & limits settings. | |
281293 | Tools/Selection Groups | Groups selected entities and selects entities based on these groups. | |
359294 | Steel/Macro | Creates hall. | |
295 | Steel/Macro/Hall | Opens the hall settings. | |
360296 | Steel/Macro | Creates steel hand rail. | |
297 | Steel/Macro/Hand Rail | Opens the hand rail settings. | |
282298 | Drawings/Hatch | Draws hatch hole. | |
283299 | Drawings/Hatch/User Defined Hatch | Hatch settings. | |
284300 | Steel/Macro/Single Plate Connection | Creates a haunch connection. | |
285301 | View/View/Solid with Edges | Changes view detail to hidden line. | |
286302 | View/View | Changes view detail to hidden line black && white. | |
366303 | Right click menu | Removes all selected entities in the 3D view. | |
287304 | Modify/Entity Edit/Sweep | Hides/shows edge. | |
288305 | Modify/Entity Edit/Sweep | Hides/shows edge part. | |
289306 | Home/Roof/Roof Details | Draws hip/valley rafters. | |
290307 | Home/Terrain | Draws hole. | |
291308 | Rendering/Tools | Opens horizontal plan section toolbar. | |
292309 | View/Workplane/Target Workplane | Creates a horizontal workplane. | |
293310 | Tools/Import-Export/Import | Imports IFC file. Merges file content with current project. | |
| ideCAD logo/Import |
| |
294311 | Tools/Import-Export/Export | Exports project to IFC. | |
| ideCAD logo/Export |
| |
295312 | Tools/Quantity Report | Creates II BV report. | |
296313 | Drawings/Text | Imports text from a text file. | |
297314 | Right click menu/Drawing order | Sends the selected object to the background. | |
298315 | Right click menu/Drawing order | Sends the selected object behind a certain object. | |
299316 | Right click menu/Drawing order | Sends the selected object to the foreground. | |
300317 | Right click menu/Drawing order | Sends the selected object in front of a certain object. | |
301318 | Modify/Entity Edit | Incline objects. | |
302319 | It is located in the dimension toolbar. | Includes beams into section dimension. | |
303320 | It is located in the dimension toolbar. | Includes doors/windows into section dimension. | |
304321 | It is located in the dimension toolbar. | Includes slabs into section dimension. | |
305322 | Drawings/Dimensions | Draws inner dimension. | |
380323 | Drawings/Dimensions/Free Dimension | Opens inner dimension settings. | |
306324 | Settings/Project Settings | Opens input units. | |
307325 | Drawings/Layout Design/Create New Layout | Inserts a layout block. | |
308326 | Home/Concrete/Stair | Changes insertion point. | |
| Concrete/Concrete/Stair |
| |
| It is located in the ODT door/window toolbar. |
| |
| It is located in the stair toolbar. |
| |
| It is located in the library toolbar. |
| |
309327 | Drawings/Dimensions | Draws intersection dimension. | |
310328 | Home/Edit | Inverts current selection. | |
| Facade/Edit |
| |
| Concrete/Edit |
| |
| Steel/Edit |
| |
| Drawings/Edit |
| |
311329 | ideCAD Home | ideCAD logo | Opens the start page. |
312330 | Home/Door-Window/Door-Window | Draws jamb. | |
| Facade/Exterior Veneer |
| |
| Facade/Door-Window/Door-Window |
| |
313331 | Facade/Exterior Veneer/Jamb | Opens jamb settings. | |
314332 | Home/Modify | Joins linear objects. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
315333 | Steel/Macro/Single Plate Connection | Creates a beam-beam connection (Joining plates). | |
316334 | Coordinate Box | L enters the coordinate box. Object length is entered. | |
317335 | Drawings/Dimension | Draws label. | |
318336 | Modify/Entity Edit | Label entities. | |
319337 | It is located in the exterior veneer toolbar. | Draws lap siding. | |
320338 | It is located in the exterior veneer toolbar. | Draws lap siding with gap. | |
321339 | Home/Edit | Selects last selected entities. | |
| Facade/Edit |
| |
| Concrete/Edit |
| |
| Steel/Edit |
| |
| Drawings/Edit |
| |
322340 | Home/Roof/Roof Details | Draws laths. | |
323341 | Settings/Element Properties | Opens layer settings. | |
342 | Right click menu on the plan view. | Opens layer settings. | |
324343 | Drawings/Layout Design/Create New Layout | Changes settings of current layout. | |
325344 | View/Perspective | Changes view to left. | |
326345 | It is located in the column toolbar. | Sets edge left middle aligned. | |
327346 | It is located in the dimension toolbar. | Left side section dimension. | |
328347 | Drawings/Dimension | Draws level dimension. | |
398348 | Drawings/Dimensions/Level Dimension | Opens level dimension settings. | |
329349 | Home/Entities | Draws library. | |
| Rendering/3D Geometric Objects |
| |
| Drawings/Primitives |
| |
330350 | Home/Entities/Library | Draws library settings. | |
| Rendering/3D Geometric Objects/Library |
| |
| Drawings/Primitives/Library |
| |
331351 | Settings/Project Settings | Loads settings from a file. | |
332352 | Tools/Edit | Local undo, undo for current mode only. | |
333353 | Modify/Layers | Locks/Unlocks layers. | |
127354 | Right Click Menu | Lock the layer of the object. | |
334355 | Home/Modify | Blocks entities. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
335356 | Tools/Edit | Make architectural file compatible with structural. | |
336357 | Settings/Element Properties | Materials are listed, edited, created. | |
| Rendering/Render |
| |
337358 | Settings/Menu Settings | Opens menu settings. | |
338359 | Steel/Steel/Composite Slab | Draws metal slab. | |
339360 | Home/Snap | Snaps to midpoints of entities. | |
| Facade/Snap |
| |
| Concrete/Snap |
| |
| Steel/Snap |
| |
| Drawings/Snap |
| |
340361 | Home/Modify | Takes symmetry. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
341362 | It is located in the ODT door/window toolbar. | Mirrors door/window labels. | |
342363 | It is located in the ODT door/window toolbar. | Takes symmetry with respect to the X-axis. | |
| It is located in the column toolbar. |
| |
| It is located in the strip footing toolbar. |
| |
343364 | Home/Concrete/Stair | Takes symmetry with respect to the Y-axis. | |
| Concrete/Concrete/Stair |
| |
| It is located in the ODT door/window toolbar. |
| |
344365 | It is located in the trusses toolbar. | Allow modify sub elements of truss. | |
345366 | Home/Modify | Move. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
346367 | Home/Axis/Axis | Moves axis label. | |
| Concrete/Axis/Axis |
| |
| Steel/Axis/Axis |
| |
| Modift/Entity Edit |
| |
347368 | Modify/Entity Edit/Dimension | Moves dimension texts. | |
348369 | It is located in the raft foundation toolbar. | Moves raft foundation text. | |
349370 | Modify/Entity Edit/Slab | Moves slab text. | |
434371 | Home/Door-Window/Stair | Moves stair text. | |
Concrete/Concrete/Stair | |||
Modify/Entity Edit/Stair | |||
350372 | Modify/Entity Edit/Zone | Moves zone text. | |
351373 | Steel/Macro/Single Plate Connection | Creates multi stiffener plates. | |
352374 | Steel/Macro/Single Plate Connection | Creates horizontal multi stiffener plates. | |
353375 | Drawings/Primitives | Draws multiple lines. | |
354376 | Home/Snap | Snaps to nearest points of entities. | |
| Facade/Snap |
| |
| Concrete/Snap |
| |
| Steel/Snap |
| |
| Drawings/Snap |
| |
355377 | ideCAD logo | Opens the new project open dialog. | |
356378 | ideCAD logo | Creates a new, empty 2D drawing window. | |
357379 | It is located in the horizontal plan section toolbar. | Adds new horizontal plan sections. | |
358380 | ideCAD logo | Creates a new project. | |
359381 | Drawings/Layout Design/Create New Layout | Creates a new layout block using all drawing. | |
360382 | Drawings/Layout Design/Create New Layout | Creates a new layout block | |
361383 | Drawings/Layout Design/Create New Layout | Creates a new layout block | |
362384 | Drawings/Layout Design/Create New Layout | Creates a new layout block | |
363385 | Drawings/Layout Design/Create New Layout | Creates a new layout block | |
386 | It is located in the trim to roof toolbar. | Add new trim group. | |
364387 | View/Window | Activates next window. | |
365388 | View/Nodes | Opens node settings. | |
366389 | Steel/Macro/Single Plate Connection | Creates a notched seating connection. | |
367390 | Drawings/Primitives | Draws NURBS curve. | |
367391 | Home/Modify | Offset. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
368392 | It is located in the section toolbar. | Finishes the current job. | |
369393 | ideCAD logo | Opens a previously saved project. | |
370394 | Home/Snap | Enters orthogonal drawing mode. | |
| Facade/Snap |
| |
| Concrete/Snap |
| |
| Steel/Snap |
| |
| Drawings/Snap |
| |
371395 | Drawings/Dimensions | Draws outer dimension. | |
457396 | Drawings/Dimensions/Free Dimension | Opens outer dimension settings. | |
372397 | Keyboard | Scrolls down the page in reports. Also shifts the viewpoint down in fly mode in the perspective view. | |
373398 | Keyboard | Scrolls the page up in reports. Also shifts the viewpoint upwards in flight mode in the perspective view. | |
374399 | View/Zoom | Pans the window. | |
375400 | Home/Snap | Parallel reference. | |
| Facade/Snap |
| |
| Concrete/Snap |
| |
| Steel/Snap |
| |
| Drawings/Snap |
| |
376401 | Home/Edit | Paste entities. | |
| Facade/Edit |
| |
| Concrete/Edit |
| |
| Steel/Edit |
| |
| Drawings/Edit |
| |
377402 | Drawings/Primitives | Draws path primitives. | |
378403 | It is located in the sweep toolbar. | Sets path based. | |
379404 | Drawings/Primitives | Draws pattern path. | |
380405 | Drawings/Hatch | Draws parametric hatch. | |
381406 | It is located in the sweep toolbar. | Sets parent based. | |
382407 | Tools/Edit | Pastes contours. | |
383408 | Tools/File Sharing | Pastes entities from a .blk file. | |
384409 | Tools/Import-Export/Export | Exports To PDF. | |
| ideCAD logo/Export |
| |
385410 | Settings/Element Properties | Opens pen and color settings. | |
386411 | Home/Snap | Perpendicular reference. | |
| Facade/Snap |
| |
| Concrete/Snap |
| |
| Steel/Snap |
| |
| Drawings/Snap |
| |
387412 | View/Perspective | Changes view to perspective. | |
388413 | Rendering/Lights-Camera | Draws photometric light. | |
389414 | Rendering/Lights-Camera/Photometric Light | Photometric light settings. | |
390415 | Tools/Import-Export/Export | Saves the screen image as a bitmap file. | |
| ideCAD logo/Export |
| |
391416 | Rendering/Render | Creates Planar Texutre Mapper Object. | |
392417 | Home/Terrain | Draws plateau. | |
393418 | ideCAD logo | Plots your drawings. | |
394419 | Rendering/Lights-Camera | Draws point light. | |
395420 | Rendering/Lights-Camera/Point Light | Point light settings. | |
396421 | Home/Edit | Creates copies of objects with rotation. | |
| Facade/Edit |
| |
| Concrete/Edit |
| |
| Steel/Edit |
| |
| Drawings/Edit |
| |
397422 | Settings/Project Settings | Polar tracking. | |
398423 | Home/Concrete/Column | Draws polygon column. | |
| Concrete/Concrete |
| |
399424 | Modify/Transform/Beam to Shearwall | Transforms primitive entities to plate section. | |
400425 | Steel/Steel/Sheeting | Draws sheeting polygon. | |
401426 | Home/Entities | Draws pool. | |
402427 | Home/Entities/Pool | Opens pool settings. | |
403428 | Home/Roof/Roof Details | Draws a post. | |
404429 | Home/Project Settings | Opens preferences. | |
| Settings/Project Settings |
| |
405430 | View/Window | Activates previous window. | |
406431 | Settings/Element Properties | Opens profiles | |
407432 | Settings/Project Settings | Open project settings. | |
408433 | Settings/Project Settings | Open project save settings. | |
409434 | Home/Project Settings | Opens project settings. | |
| Concrete/Project Settings |
| |
| Steel/Project Settings |
| |
410435 | Home/Roof/Roof Details | Draws purlins. | |
411436 | Steel/Macro/Single Plate Connection | Creates a purlin connection. | |
511437 | Steel/Macro/Single Plate Connection | Creates stiffener plates. | |
412438 | Tools/Quantity Report | Generates a report of quantities in the project. | |
413439 | Steel/Steel/Steel Purlin | Draws R purlin. | |
414440 | Drawings/Dimension | Draws radius dimension. | |
514441 | Drawings/Dimensions/Level Dimension | Opens radius dimension settings. | |
415442 | Concrete/Foundation | Draws raft foundation. | |
416443 | Concrete/Foundation | Draws raft edge. | |
417444 | Concrete/Foundation/Raft Edge | Opens raft edge settings. | |
418445 | Concrete/Foundation/Raft | Draws raft foundation hole. | |
419446 | Concrete/Foundation/Raft | Opens raft foundation settings. | |
420447 | Home/Roof/Roof Details | Draws rafters. | |
421448 | Home/Entities | Draws railing. | |
| Facade/Railing |
| |
422449 | Home/Entities/Railing | Draws 3D railing. | |
423450 | Home/Entities/Railing | Draws 3D railing over objects. | |
424451 | Home/Entities/Railing | Opens railing settings. | |
| FacadeRailing/Railing |
| |
425452 | Home/Roof | Draws rainwater pipe. | |
426453 | Home/Roof/Rainwater Pipe | Opens rainwater pipe settings. | |
427454 | Drawings/Primitives | Places a raster image file onto the drawing. | |
428455 | Rendering/Render | Recalls render with the last settings. | |
429456 | Drawings/Primitives/Multiple Lines | Draws a rectangle.430 | |
537 | Modify/Transform/Beam to Shearwall | Converts rectangular columns to circular columns. | |
Right click menu | |||
458 | Home/Wall | Draws 4walls as a rectangle. | |
431459 | Tools/Edit | Redo. | |
432460 | Modify/Entity Edit/Sweep | Removes end cut of edge. | |
433461 | Right click menu | Removes objects from the group. | |
434462 | Modify/Entity Edit/Sweep | Removes inner cut of edge. | |
435463 | Modify/Entity Edit/Sweep | Removes local offset of edge. | |
436464 | It is located in the space truss toolbar. | Removes a nodule from space truss. | |
437465 | Modify/Entity Edit/Sweep | Removes offset of edge. | |
438466 | It is located in the hatch toolbar. | Removes an existing point on the hatch. | |
439467 | Rendering/Render | Renders active view. | |
441468 | Modify/Entity Edit/Dimension | Resets dimension text displacements. | |
442469 | Settings/Project Settings | Resets settings. | |
443470 | Drawings/Primitives | Draws revision cloud. | |
444471 | Home/Entities/3D Objects | Draws revolved object. | |
| Facade/3D Geometric Objects/3D Objects |
| |
| Rendering/3D Geometric Objects |
| |
445472 | View/Perspective | Changes view to right. | |
446473 | It is located in the dimension toolbar. | Right side section dimension. | |
447474 | Steel/Macro/Single Plate Connection | Creates a rigid on both axis base plate connection. | |
448475 | Steel/Macro/Single Plate Connection | Creates a rigid on strong axis base plate connection. | |
449476 | Home/Roof | Draws roof. | |
| Modify/Entity Edit |
| |
450477 | It is located in the roof toolbar. | Opens the roof details toolbar. | |
451478 | Facade/3D Geometric Object | Draws roof gutter. | |
452479 | Facade/3D Geometric Object/Roof Gutter | Opens roof gutter settings. | |
453480 | Home/Roof/Roof | Draws roof hole. | |
454481 | Home/Roof/Roof | Draws roof plane. | |
455482 | Home/Roof/Roof | Opens roof settings. | |
456483 | Home/Door-Window | Draws roof window. | |
| Home/Roof/Roof |
| |
| Facade/Door-Window |
| |
457484 | Home/Modify | Rotate. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
458485 | Home/Modify | Rotates the building. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Tools/Tools |
| |
| Drawings/Modify |
| |
459486 | Facade/Exterior Veneer/Curtain Wall | Rotates curtain wall panel. | |
460487 | Home/Modify | Rotates node. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
461488 | Steel/Macro/Single Plate Connection | Creates a round plate tube base plate connection. | |
462489 | ideCAD logo | Saves current project. | |
463490 | ideCAD logo | Save current project with a new name. | |
464491 | ideCAD logo | Saves compresed project file. | |
465492 | ideCAD logo | Saves old version project file. | |
493 | Save Screen Image | ideCAD logo | Saves the screen image as a bitmap file. |
466494 | Settings/Project Settings | Saves settings to a file. | |
467495 | Home/Concrete/Stair | Saves stair. | |
| Concrete/Concrete/Stair |
| |
| Modify/Entity Edit/Stair |
| |
468496 | Home/Modify | Scales entities. | |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
469497 | Home/Modify | Scales entities by referance. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
470498 | Steel/Macro/Single Plate Connection | Creates a seating support connection(8). | |
471499 | Steel/Macro/Single Plate Connection | Creates a seating truss connection. | |
472500 | Steel/Macro/Single Plate Connection | Creates a seating weld connection. | |
473501 | Modify/Entity Edit/Stair | Secondary stair deformation. | |
474502 | Steel/Steel | Draws secondary beam. | |
475503 | Tools/Generate | Edit and generate sections and elevations. | |
| Drawings/Tools | Edit and generate sections and elevations. | |
476504 | It is located in the dimension toolbar. | Draws single section dimension. | |
477505 | It is located in the dimension toolbar. | Draws section dimension group. | |
478506 | Drawings/Dimension | Draws section elevation. | |
479507 | Drawings/Tools | Opens section elevation settings. | |
480508 | Drawings/Tools | Draws section line. | |
481509 | Drawings/Tools/Section Line | Opens section line settings. | |
482510 | Home/Edit | Selects all entitites. | |
| Facade/Edit |
| |
| Concrete/Edit |
| |
| Steel/Edit |
| |
| Drawings/Edit |
| |
483511 | Steel/Steel/Steel Purlin | Select purlins to add analysis. | |
484512 | Home/Edit | Selects entity in all stories. | |
| Facade/Edit |
| |
| Concrete/Edit |
| |
| Steel/Edit |
| |
| Drawings/Edit |
| |
485513 | Right click menu | Select the objects in the group. | |
486514 | It is located in the terrain toolbar. | Selects terrain and child entities. | |
487515 | It is located in the library toolbar. | Set auto elevation. | |
488516 | Home/Modify | Sets default settings to selected entities. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Modify/Entities |
| |
| Drawings/Modify |
| |
489517 | Modify/Entity Edit | Sets hatch reference point. | |
490518 | Home/Snap | Sets new local coordinate system. | |
| Facade/Snap |
| |
| Concrete/Snap |
| |
| Steel/Snap |
| |
| Drawings/Snap |
| |
491519 | Home/Entities/Pool | Set pool cantilever slab properties. | |
| Modify/Entity Edit/Pool |
| |
492520 | Home/Entities/Pool | Set pool surface properties. | |
| Modify/Entity Edit/Pool |
| |
493521 | Home/Entities/Pool | Set pool surface slope. | |
| Modify/Entity Edit/Pool |
| |
494522 | Home/Entities/Pool | Set pool wall properties. | |
| Modify/Entity Edit/Pool |
| |
495523 | Tools/Selection Groups | Sets currently selected entities. | |
497524 | It is located in the steel column toolbar. | Sets steel element delta. | |
| It is located in the steel beam toolbar. |
| |
498525 | Modify/Entity Edit | Sets entity trim algorithm. | |
499526 | Modify/Entity Edit | Sets priorities of wall at joints. | |
500527 | Home/Concrete | Draws shearwall. | |
| Concrete/Concrete |
| |
501528 | Home/Concrete/Shearwall | Opens shearwall settings. | |
| Concrete/Concrete/Shearwall |
| |
502529 | Modify/Transform/Beam to Shearwall | Converts shearwalls to beams. | |
530 | Modify/Transform/Beam to Shearwall | Converts shearwalls to columns. | |
Right click menu | |||
503531 | Steel/Steel | Draws sheeting over purlins. | |
504532 | Steel/Steel/Sheeting | Draws sheeting between two elements. | |
505533 | View/View | Show coordinate box. | |
506534 | Right click menu in the perspective view. | Shows the render boundaries before rendering. | |
507535 | View/View | Show toolbars. | |
508536 | Modify/Entity Edit/Dimension | Shows/hides dimension text. | |
509537 | Modify/Layers | Show/hide entity layers. | |
510538 | View/Nodes | Shows/hides nodes | |
511539 | Home/Concrete/Stair | Shows/hides railings. | |
| Concrete/Concrete/Stair |
| |
| Modify/Entity Edit/Stair |
| |
512540 | Steel/Macro/Single Plate Connection | Creates a simple base plate connection. | |
513541 | Concrete/Foundation | Draws single footing. | |
514542 | Steel/Macro/Single Plate Connection | Creates a single angle connection. | |
515543 | Concrete/Foundation/Single | Opens single footing settings. | |
516544 | Steel/Macro/Single Plate Connection | Creates a single plate connection. | |
517545 | Steel/Macro/Single Plate Connection | Creates a single plate seating connection. | |
518546 | Steel/Steel/Steel Purlin | Draws single steel purlin. | |
519547 | It is located in the steel beam toolbar. | Draws single secondary beam. | |
520548 | Concrete/Concrete | Draws slab. | |
521549 | Concrete/Concrete | Draws slab edge. | |
521550 | Steel/Steel/Composite Slab | Draws steel slab edge. | |
522551 | Concrete/Concrete/Slab Edge | Opens slab edge settings. | |
523552 | Concrete/Concrete/Slab | Draws slab hole. | |
524553 | Concrete/Concrete/Slab | Opens slab settings. | |
525554 | Steel/Macro/Truss | Draws Sloping Flat Truss. | |
526555 | Steel/Macro/Truss | Draws Sloping Vault Truss. | |
527556 | Home/Snap | Snap to grid. | |
| Facade/Snap |
| |
| Concrete/Snap |
| |
| Steel/Snap |
| |
| Drawings/Snap |
| |
528557 | Home/Snap | Snap to nodes. | |
| Facade/Snap |
| |
| Concrete/Snap |
| |
| Steel/Snap |
| |
| Drawings/Snap |
| |
529558 | View/View | Changes view detail to solid. | |
530559 | View/View | Changes view detail to solid with edges. | |
531560 | Keyboard | Moves the cursor to horizontal, vertical, and free axis drawing positions on axes. Changes the offset in commands such as wall, column, beam, shearwall. Skips a name in object labeling. Changes the insertion point in commands such as stair, library. | |
532561 | Steel/Steel/Steel Purlin | Draws space purlin. | |
533562 | Steel/Macro | Draws space truss. | |
534563 | Steel/Macro/Single Plate Connection | Creates a spacer plate connection. | |
535564 | Home/Entities/3D Objects | Draws sphere. | |
| Facade/3D Geometric Objects/3D Objects |
| |
| Rendering/3D Geometric Objects |
| |
536565 | Steel/Macro/Single Plate Connection | Creates a splice connection. | |
537566 | Rendering/Lights-Camera | Draws spotlight. | |
538567 | Rendering/Lights-Camera/Spot Light | Opens spot light settings. | |
539568 | Home/Concrete | Draws stair. | |
| Concrete/Concrete |
| |
707569 | Steel/Macro | Creates steel stair. | |
570 | Steel/Macro/Stair | Opens the steel stair settings. | |
540571 | Home/Concrete/Stair | Opens stair settings. | |
| Concrete/Concrete/Stair |
| |
541572 | Steel/Macro/Single Plate Connection | Creates a stay connection. | |
542573 | Steel/Macro/Single Plate Connection | Craetes a stay connection (secondary beam). | |
543574 | Steel/Steel | Draws steel beam. | |
544575 | Steel/Steel | Draws steel brace. | |
545576 | Steel/Steel | Draws steel column. | |
546577 | It is located in th steel column toolbar. | Draws steel column. | |
733578 | Steel/Macro/Hand Rail | Creates steel hand rail on arc. | |
734579 | Steel/Macro/Hand Rail | Creates steel hand rail on line. | |
547580 | Steel/Steel | Draws steel purlin. | |
548581 | Steel/Steel/Steel Purlin | Draws steel tie. | |
549582 | Steel/Macro/Single Plate Connection | Creates a stiffened end plate connection. | |
550583 | Steel/Macro/Single Plate Connection | Creates a stiffened shear plate connection. | |
551584 | Settings/Project Settings | Arrange stories in the project. | |
552585 | It is located in the sweep toolbar. | Sets story alignment free. | |
553586 | It is located in the sweep toolbar. | Sets story bottom aligned. | |
554587 | Home/Project Settings | Copies all entities from a story to another story. | |
| Concrete/Project Settings |
| |
| Steel/Project Settings |
| |
| Tools/Edit |
| |
555588 | Home/Project Settings | Opens story list. | |
| Concrete/Project Settings |
| |
| Steel/Project Settings |
| |
| View/Window |
| |
| Drawings/Window |
| |
556589 | Home/Project Settings | Arrange stories in the project. | |
| Concrete/Project Settings |
| |
| Steel/Project Settings |
| |
557590 | It is located in the sweep toolbar. | Sets story top aligned. | |
558591 | Home/Modify | Stretch node. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
559592 | Concrete/Foundation | Draws multiple strip footings. | |
560593 | Concrete/Foundation/Strip | Opens strip footing settings. | |
561594 | View/Mode | Enters structural design mode. | |
562595 | Home/Roof/Roof Details | Draws a strut. | |
563596 | Steel/Macro/Single Plate Connection | Creates stub. | |
564597 | Home/Terrain | Draws sub region. | |
565598 | It is located in the exterior veneer toolbar. | Swaps side. | |
566599 | Home/Entities/3D Objects | Draws sweep. | |
| Facade/3D Geometric Objects/3D Objects |
| |
| Modify/Entity Edit |
| |
| Rendering/3D Geometric Objects |
| |
567600 | It is located in the sweep toolbar. | Opens the sweep operations toolbar. | |
568601 | Drawings/Window | Returns to last story window. | |
569602 | Steel/Macro/Single Plate Connection | Creates a T plate connection. | |
570603 | Home/Snap | Draws tangents. | |
| Facade/Snap |
| |
| Concrete/Snap |
| |
| Steel/Snap |
| |
| Drawings/Snap |
| |
571604 | View/Workplane | Creates a free workplane using existing objects. | |
572605 | It is located in the exterior veneer toolbar. | Draws terra cotta siding. | |
573606 | Home/Terrain | Draws terrain polygon. | |
574607 | Home/Terrain/Terrain Polygon | Opens terrain settings. | |
575608 | Rendering/3D Geometric Objects/3D Text | Draws text. | |
| Drawings/Text |
| |
576609 | Rendering/3D Geometric Objects/3D Text | Opens font settings. | |
| Drawings/Text/Text |
| |
577610 | Tip of the Day | ideCAD logo/Help | Shows tip of the day. |
788611 | Right click menu | Switches between perspective and axonometric views. | |
578612 | View/Window | Resizes the view to full screen. | |
579613 | View/Perspective | Changes view to perspective. | |
580614 | Concrete/Concrete/Slab | Transforms a slab to a ribbed slab. | |
| Modify/Entity Edit/Slab |
| |
581615 | Concrete/Concrete/Slab | Transforms a slab to a waffle slab. | |
| Modify/Entity Edit/Slab |
| |
582616 | View/View | Opens transparent story settings dialog. | |
583617 | Steel/Macro/Truss | Draws Trapezoid Sloping Left Truss. | |
584618 | Steel/Macro/Truss | Draws Trapezoid Sloping Right Truss. | |
585619 | Steel/Macro/Truss | Draws Trapezoid Sloping Symmetric Truss. | |
586620 | Steel/Macro/Truss | Draws Trapezoid Slopping Asymmetric Truss. | |
587621 | Steel/Macro/Truss | Draws Trapezoid Type 1 Truss. | |
588622 | Steel/Macro/Truss | Draws Trapezoid Type 2 Truss. | |
589623 | Steel/Macro/Truss | Draws Trapezoid Vault Truss. | |
590624 | Steel/Macro/Truss | Draws Triangular Asymmetric Truss. | |
591625 | Steel/Macro/Truss | Draws Triangular Sloping Left Truss. | |
592626 | Steel/Macro/Truss | Draws Triangular Sloping Right Truss. | |
593627 | Steel/Macro/Truss | Draws Triangular Symmetric Truss. | |
594628 | Home/Modify | Line cuts primitive objects such as arcs to another line or arc. | |
| Facade/Modify |
| |
| Concrete/Modify |
| |
| Steel/Modify |
| |
| Drawings/Modify |
| |
595629 | Modify/Entity Edit/Column | Trims column edges with an axis or beam. | |
596630 | Home/Roof/Roof | Trims entities with roofs. | |
| Modify/Entity Edit/Roof |
| |
| Tools/Tools |
| |
597631 | Home/Wall/Wall | Trims/extends walls. | |
| Modify/Entity Edit/Wall |
| |
598632 | Home/Roof/Roof Details | Draws a trimmer. | |
599633 | Steel/Macro | Draws Custom Truss. | |
600634 | Steel/Macro/Single Plate Connection | Creates a truss connection. | |
601635 | Home/Entities/3D Objects | Draws tube. | |
| Facade/3D Geometric Objects/3D Objects |
| |
| Rendering/3D Geometric Objects |
| |
602636 | Steel/Macro/Single Plate Connection | Creates a tube base plate connection. | |
603637 | Tools/Edit | Undo. | |
604638 | Steel/Macro/Single Plate Connection | Creates an unstiffened seated connection. | |
605639 | Drawings/Layout Design/Create New Layout | Updates linked layout blocks. | |
606640 | Home/Entities/Library | Update library elevation. | |
| Rendering/3D Geometric Objects/Library |
| |
607641 | Home/Entities/Railing | Updates 3D railing. | |
| Rendering/Railing/Railing |
| |
608642 | It is located in the ODT door/window toolbar. | Use distance. | |
609643 | It is located in the ODT door/window toolbar. | Use dio as reference. | |
610644 | Drawings/Hatch | Draws user defined hatch. | |
611645 | It is located in the tubes toolbar. | Draws user defined tube. | |
612646 | Home/Roof | Draws vault. | |
613647 | Steel/Macro/Truss | Draws Vault Truss. | |
614648 | Home/Roof/Vault | Opens vault settings. | |
615649 | View/Workplane/Target Workplane | Creates a vertical workplane. | |
616650 | View/View | Opens view settings. | |
617651 | View/Window | Display view configuration options. | |
618652 | Home/Wall | Draws wall. | |
| Modify/Wall |
| |
619653 | It is located in the sweep toolbar. | Sets wall based. | |
620654 | Home/Wall/Wall | Opens wall settings. | |
621655 | Tools/Import-Export/Import | Import .obj files. | |
| ideCAD logo/Import |
| |
3656 | Tools/Import-Export/Export | Exports to OBJ file format. | |
ideCAD logo/Export | |||
622657 | Steel/Macro/Single Plate Connection | Creates a welded box/tube connection. | |
623658 | Steel/Macro/Single Plate Connection | Creates Welded Connection. | |
624659 | Steel/Macro/Single Plate Connection | Creates a welded flange plate connection. | |
625660 | Steel/Macro/Single Plate Connection | Creates a welded web connection. | |
626661 | Steel/Macro/Single Plate Connection | Creates a wind connection. | |
627662 | Coordinate Box | Enters the X coordinate box. X coordinate is entered. | |
628663 | Coordinate Box | Enters the Y coordinate box. Y coordinate is entered. | |
629664 | Home/Zone | Draws zone. | |
| Modify/Entity Edit |
| |
630665 | Home/Zone | Draws zone edge. | |
631666 | Home/Zone | Draws zone hole. | |
632667 | Home/Zone | Draws zone list. | |
633668 | Home/Zone/Zone Edge | Opens zone edge settings. | |
634669 | Home/Zone/Zone Hole | Opens zone hole settings. | |
635670 | Home/Zone/Zone List | Opens zone list settings. | |
636671 | Home/Zone/Zone | Opens zone settings. | |
637672 | View/Zoom | Zooms the window. | |
638673 | View/Zoom | Zooms to the extents of the drawings. | |
639674 | View/Zoom | Zoom selection. | |
640675 | View/Zoom | Zoom into a rectangular window. | |
641676 | Keyboard | Zooms in. | |
642677 | Keyboard | Zooms out. |
...