List of ideCAD Architectural Commands

The list of commands available in the ideCAD Architectural package program is given below in alphabetical order (Base version: 11.02).

	Command	Location of command in ribbon menu or toolbar	Explanation
1	3D Block (Import)	Tools/Import-Export/Import	Imports 3D Block.
		ideCAD logo/Import
2	3D Block (Export)	Tools/Import-Export/Export	Exports 3D Block.
		ideCAD logo/Export
		ideCAD logo/Export
4	3D Railing Over Objects	Facade/Railing	Draws 3D railing over objects.
5	3D Railing	Facade/Railing	Draws 3D railing.
6	3D Text	Rendering/3D Geometric Objects	Draws 3d text.
7	3DS (Export)	Tools/Import-Export/Export	Exports to 3DS file format.
		ideCAD logo/Export
8	3DS (Import)	Tools/Import-Export/Import	Imports 3DS file format.
		ideCAD logo/Import
9	3P Workplane	View/Workplane/Target Workplane	Creates a workplane through 3 points.
	4 Bolts Stiffened End Plate Connection	Steel/Macro/Single Plate Connection	Creates a 4 bolts stiffened end plate
10	4 Bolts Unstiffened End Plate Connection	Steel/Macro/Single Plate Connection	Creates a 4 bolts unstiffened end plate connection.
11	8 Bolts Stiffened End Plate Connection	Steel/Macro/Single Plate Connection	Creates a 8 bolts stiffened end plate connection.
12	About ideCAD Architectural	ideCAD logo/Help	It gives the program version and usage license information.
13	Activate Local CS	Home/Snap	Uses defined local coordinate system.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
14	Add Custom Snap Points on Line	Right click menu in perspective view	Creates snap points on a line in a perspective image.
15	Add Lines to Edges	It is located in the hatch toolbar.	Adds lines to the hatch edges.
16	Add Point	It is located in the hatch toolbar.	Add a new point to hatch.
17	Add Stair Area	Home/Concrete/Stair	Adds stair area to an existing stair.
		Concrete/Concrete/Stair
18	Add To Selection Group	Right click menu	Adds new objects to the groups
19	Add/Remove Dimension Parent	Modify/Entity Edit/Dimension	Adds/removes dimension parents.
20	Advanced Arrray	Home/Edit	Generates array of entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
21	Advanced Snap	Home/Snap	Enables advanced snap mode.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
22	Alias Editor	Settings/Menu Settings	Edits commands used on the command line.
23	Align Bottom	It is located in the align toolbar.	Aligns the selected entities at the bottom.
24	Align by Drawing a Path	It is located in the align toolbar.	Aligns the selected entities by drawing a path.
25	Align by Selecting an Edge of Entity	It is located in the align toolbar.	Align the selected entities by selecting an edge of entity.
26	Align Entities	Home/Modify	Aligns the selected entities.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
27	Align Left	It is located in the align toolbar.	Aligns the selected entities to the left.
28	Align Object Center	It is located in the align toolbar.	Aligns the selected entities to the object center.
29	Align Nearest Point	It is located in the align toolbar.	Aligns the selected entities to the nearest point.
30	Align Right	It is located in the align toolbar.	Aligns the selected entities to the right.
31	Align Top	It is located in the align toolbar.	Aligns the selected entities to the top.
32	Angle	Home/Reference	Measures the angle.
		Facade/Reference
		Concrete/Reference
		Steel/Reference
		Tools/Reference
		Drawings/Reference
33	Angle Dimension	Drawings/Dimension	Draws angle dimension.
35	Angle Dimension Settings	Drawings/Dimensions/Level Dimension	Opens angle dimension settings.
34	Angle Library Placement	It is located in the library toolbar.	Sets vertical angle of library automatically using underlying geometry.
35	Apex Type Connection	Steel/Macro/Single Plate Connection	Creates a apex type connection.
36	Arc (Center-Radius-Angles)	It is located in the primitives toolbar.	Draws arc.
37	Arc Axis	Home/Axis	Draws arc axis.
		Concrete/Axis
		Steel/Axis
38	Arc Axis Through 3Points	Home/Axis	Draws arc axis through 3 points.
		Concrete/Axis
		Steel/Axis
39	Arc Beam	Concrete/Concrete	Draws arc beam.
40	Arc Dome	Home/Roof/Dome	Draws arc dome.
41	Arc Dome 3P	Home/Roof/Dome	Draws arc dome through 3 points.
42	Arc Slab Edge	Concrete/Concrete/Slab Edge	Draws arc slab edge.
43	Arc Through 3 Points	It is located in the primitives toolbar.	Draws arc through 3 points.
44	Arc Wall	It is located in the wall toolbar.	Draws arc wall.
45	Arc Zone Edge	It is located in the zone edge toolbar.	Draws arc zone edge.
46	Area	Home/Reference	Calculates area.
		Facade/Reference
		Concrete/Reference
		Steel/Reference
		Tools/Reference
		Drawings/Reference
47	Array	Home/Edit	Generates an array of entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
48	Assign Material	Rendering/Render	Continously assigns selected material to face groups.
49	Auto Label Entities	Modify/Entity Edit	Auto label entities.
		Tools/Tools
50	Automatic Hatch	It is located in the hatch toolbar.	Creates hatch with closed polygons.
51	Axis	Home/Axis	Draws axis.
		Concrete/Axis
		Steel/Axis
52	Axis Border	Modify/Entity Edit/Move Axis Label	Sets the axis border.
53	Axis Offset	It is located in the axis toolbar.	Draws an axis with an offset to the previous axis drawn.
54	Axis Settings	Home/Axis/Axis	Opens axis settings.
		Concrete/Axis/Axis
		Steel/Axis/Axis
55	Axonometric	View/Perspective	Changes view to axonometric.
56	Back	View/Perspective	Changes view to back.
57	Background	View/View	Opens background settings.
58	Baseboard	It is located in the sweep toolbar.	Draws baseboard.
59	Beam	Concrete/Concrete	Draws multiple beams.
60	Beam Settings	Concrete/Concrete/Beam	Opens beam settings.
61	Beam To Shearwall	Modify/Transform	Converts beams to shearwalls.
62	Bends Curtain Wall	Facade/Exterior Facade/Curtain Wall	Bends curtain wall.
63	Bezier	Drawings/Primitives/NURBS	Draws bezier curve.
64	Bitmap Hatch	Drawings/Hatch	Draws bitmap hatch.
65	Bolted Flange Plate Connection	Steel/Macro/Single Plate Connection	Creates a bolted flange plate connection.
66	Border on Wall	It is located in the sweep toolbar.	Draws border on wall.
67	Border Vault	Home/Roof/Vault	Draws border vault.
68	Bottom	View/Perspective	Changes view to bottom.
69	Box	Home/Entities/3D Objects	Draws box.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
70	Box/Tube Cap Plate	Steel/Macro/Single Plate Connection	Creates box/tube cap plate.
71	Box/Tube End Plate Connection	Steel/Macro/Single Plate Connection	Creates a box/tube end plate connection.
72	Box/Tube Seating Connection	Steel/Macro/Single Plate Connection	Creates a box/tube seating connection.
73	Box/Tube Splice Connection	Steel/Macro/Single Plate Connection	Creates a box/tube splice connection.
74	Brace Center Connection	Steel/Macro/Single Plate Connection	Creates a brace center connection(9).
75	Brace Corner Connection	Steel/Macro/Single Plate Connection	Creates a brace corner connection(10).
76	Break	Home/Modify	Breaks off a certain part of the objects.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
77	Built-up Area & FAR Reports	Tools/BUA/FAR Reports	Creates GRZ/GFZ report.
78	Calculate Contour	Home/Axis/Axis	Calculates contour polygon.
		Concrete/Axis/Axis
		Steel/Axis/Axis
		Modify/Entity Edit/Move Axis Label
79	Camera	Rendering/Lights-Camera	Draws camera.
80	Camera Animation	Rendering/Render	Creates camera animaton.
81	Camera Path	Rendering/Render	Draws camera path.
82	Camera Settings	Rendering/Lights-Camera/Camera	Opens camera settings.
83	Cancel Secondary Stair Deformation	Modify/Entity Edit/Stair	Cancels secondary stair deformation.
84	Cancel Stair Deformation	Modify/Entity Edit/Stair	Cancels stair deformations.
85	Ceiling Cornice	It is located in the sweep toolbar.	Draws ceiling cornice.
86	Centered Column	It is located in the column toolbar.	Sets center aligned.
87	Centered Single Footing	It is located in the single footing toolbar.	Sets centered single footing.
88	Chamfer	Home/Modify	Connects two lines with a third line.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
89	Change Axis Draw Type	Home/Axis	Changes axis drawing type.
		Concrete/Axis
		Steel/Axis
90	Change Baluster Count	Home/Concrete/Stair	Changes baluster count.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
91	Change Column Dimension	Modify/Entity Edit/Column	Changes column dimensions.
92	Change Distance Point	It is located in the ODT door/window toolbar.	Change dio distance point.
93	Change Edge Part End Angles	Modify/Entity Edit/Sweep	Change edge part end angles.
94	Change Entity Layers	Modify/Layers	Changes layers of selected entities.
95	Change Jamb Side	It is located in the jamb toolbar.	Changes jamb placement to the other side of dio.
96	Change Rafter Dimensions	Home/Roof/Roof	Changes rafter dimensions.
		Modify/Entity Edit/Roof
97	Change Roof Edge Properties	Home/Roof/Roof Details	Changes roof edge properties.
		Modify/Entity Edit/Roof
98	Change Shearwall Length	Home/Concrete/Shearwall	Changes shearwall length.
99	Changes Path Direction	It is located in the railing toolbar.	Changes path direction.
		It is located in the curtain wall toolbar.
117	Check for Updates	ideCAD logo/Help	Check for updates.
100	Check Geometry	Tools/Tools	Checks validity of project geometry.
101	Circle	Drawings/Primitives	Draws circle.
102	Circle Beam	Concrete/Concrete/Beam	Draws circle beam.
103	Circle Slab Edge	Concrete/Concrete Slab Edge	Draws circle slab edge.
104	Circle Wall	It is located in the wall toolbar.	Draws circle walls.
105	Circle Zone Edge	It is located in the zone edge toolbar.	Draws circle zone edge.
106	Circular Column	Home/Concrete/Column	Draws circular column.
		Concrete/Concrete
107	Clone	Home/Edit	Clones (immediately copies) objects.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
108	Close	ideCAD logo	Closes current project.
109	Closed Bezier	Drawings/Primitives/NURBS	Draws closed bezier curve.
110	Closed NURBS	Drawings/Primitives/NURBS	Draws closed NURBS curve.
111	Closed Polygon To Polygon Column	Modify/Transform/Beam to Shearwall	Transforms primitive entities to polygon column.
112	Closed Polygon To Polygon Section	Modify/Transform/Beam to Shearwall	Transforms primitive entities to polygon section.
113	Collar Beam	Home/Roof/Roof Details	Draws a collar beam.
114	Column	Home/Concrete	Draws rectangular column.
		Concrete/Concrete
115	Column Settings	Home/Concrete/Column	Opens column settings.
		Concrete/Concrete/Column
116	Column Support	Home/Concrete/Column	Draws column support.
		Concrete/Concrete
117	Column-Beam Stiffened End Plate	Steel/Macro/Single Plate Connection	Creates a column-beam stiffened end plate connection.
118	Column-Column Connection (Built Up Column)	Steel/Macro/Single Plate Connection	Creates a built up column connection.
119	Column-Column End Plate Splice	Steel/Macro/Single Plate Connection	Creates a column-column end plate splice connection.
120	Column-Foundation Connection (Stiffened Baseplate)	Steel/Macro/Single Plate Connection	Creates a column-foundation connection (Stiffened baseplate).
121	Components Report	Tools/Quantity Report	Creates components report.
122	Composite Materials	Settings/Element Materials	Constructs and arranges composite materials.
123	Composite Slab	Steel/Steel	Draws composite slab.
124	Composite Solid Slab	Steel/Steel/Composite Slab	Draws composite solid slab.
125	Concrete Slab	Steel/Steel/Composite Slab	Draws concrete slab over steel beams.
126	Cone-Pyramid	It is located in the tubes toolbar.	Draws cone-pyramid.
127	Contents	ideCAD logo/Help	Opens the program's help document.
128	Continuous Arc Beam	Concrete/Concrete	Draws continuous arc beams.
129	Continuous Arc Wall	Home/Wall	Draws continuous arc walls.
130	Continuous Beam Connection	Steel/Macro/Single Plate Connection	Creates a continuous beam connection.
131	Continuous Slab Edge	Concrete/Concrete/Slab Edge	Draws continuous slab edges.
132	Continuous Zone Edge	It is located in the zone edge toolbar.	Draws continuous zone edges.
133	Contour Lines	Home/Axis/Axis	Sets contours of the drawing.
		Concrete/Axis/Axis
		Steel/Axis/Axis
134	Copy	Home/Edit	Copies entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
135	Copy Contour	Tools/Edit	Copies contours of a drawing.
136	Copy To File	Tools/File Sharing	Copies entities to a .blk file.
137	Cordon	Facade/3D Geometric Objects	Draws cordon.
138	Cordon Settings	Facade/3D Geometric Objects/Cordon	Opens cordon settings.
139	Corner Aligned Column	It is located in the column toolbar.	Sets corner aligned column.
140	Corner Aligned Single Footing	It is located in the single footing toolbar.	Sets corner aligned single footing.
141	Crane	Steel/Macro	Draws crane.
142	Crane Connection	Steel/Macro/Single Plate Connection	Creates a crane connection.
143	Create Camera	Right click menu in the perspective view	Creates camera.
144	Create Clip Plane	View/Workplane	Creates a clip plane.
145	Create New Layout	Drawings/Layout Design	Creates a new layout window.
146	Create New Selection Group	Right click menu	Creates new selection groups.
147	Create New Stair	Home/Concrete/Stair	Creates a new stair.
		Concrete/Concrete/Stair
148	Create User Defined Hatch	It is located in the hatch toolbar.	Creates user defined hatch from block objects.
149	Curtain Wall	Facade/Exterior Facade	Draws curtain wall.
150	Curtain Wall Dio	Facade/Exterior Facade/Curtain Wall	Draws curtain wall dio.
151	Curtain Wall Settings	Facade/Exterior Facade/Curtain Wall	Opens curtain wall settings.
152	Curve Beam	Concrete/Concrete	Draws curve beam.
153	Curve Slab Edge	Concrete/Concrete/Slab Edge	Draws curve slab edge.
154	Curve Wall	Home/Wall	Draws curve wall.
155	Curve Zone Edge	It is located in the zone edge toolbar.	Draws curve zone edge.
156	Curve To Beam	Modify/Transform/Beam to Shearwall	Converts circle, arc, ellipse objects to beam.
157	Curve To Shearwall	Modify/Transform/Beam to Shearwall	Converts circle, arc, ellipse objects to shearwall.
	Curve to Wall	Modify/Transform/Beam to Shearwall	Converts circle, arc, ellipse objects to wall.
225	Customize	Right-click on any point of the vertical toolbar	Customize the vertical toolbar and the customizable toolbar on the top edge.
158	Cylinder	It is located in the tubes toolbar.	Draws cylinder.
159	DIN277 Report	Tools/Quantity Report	Creates DIN277 report.
160	DWG/DXF	Tools/Import-Export/Import	Imports DWG DXF file formats.
161	DWG/DXF/DWF	Tools/Import-Export/Export	Exports to DWG DXF DWF file formats.
162	DWG/DXF/DWF single	Tools/Import-Export/Export	Exports to DWG DXF DWF file formats.
163	Default Aligned Column	It is located in the column toolbar.	Sets default aligned.
164	Default Single Footing	It is located in the single footing toolbar.	Sets default single footing.
165	Define CS Origin	Home/Snap	Defines temporary coordinate system origin.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
166	Define End Cut To Edge	Modify/Entity Edit/Sweep	Defines end cut to edge.
167	Define Inner Cut To Edge	Modify/Entity Edit/Sweep	Defines inner cut to edge.
168	Define Local Offset To Edge	Modify/Entity Edit/Sweep	Defines local offset to edge.
169	Define Offset To Edge	Modify/Entity Edit/Sweep	Defines offset to edge.
170	Deform Stair	Home/Concrete/Stair	Deforms stair.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
171	Delete	Home/Edit	Delete entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
172	Delete Horizontal Plan Section	It is located in the horizontal plan section toolbar.	Deletes horizonal plan section.
173	Delete Old Entities on Mirror	It is located in the mirror toolbar.	Delete old entities on mirror.
174	Delete Primitives	It is located in the pool toolbar.	Delete primitives after pool creation.
175	Delete Roof Element	Home/Roof/Roof Details	Deletes roof element(s).
		Modify/Entity Edit/Roof
176	Delete Slab Hole	It is located in the slab for steels toolbar.	Deletes slab hole.
177	Delta	It is located in the wall toolbar.	Changes delta value.
		It is located in the beam toolbar.
		It is located in the shearwall toolbar.
		It is located in the ODT door/window toolbar.
		It is located in the strip footing toolbar.
178	Deselect All	Home/Edit	Deselects all entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
179	Design Components	Tools/Quantity Report	Design components.
180	Directional Light	Rendering/Lights-Camera	Draws directional light.
181	Directional Light Settings	Rendering/Lights-Camera/Directional Light	Directional light settings.
182	Display Vertical Frame	View/Workplane	Display a vertical frame.
183	Distance	Home/Reference	Calculates distance.
		Facade/Reference
		Concrete/Reference
		Steel/Reference
		Tools/Reference
		Drawings/Reference
184	Distribute by Drawing a Path	It is located in the distribute toolbar.	Distribute by drawing a path.
185	Distribute by Selecting an Edge of Entity	It is located in the distribute toolbar.	Distribute by selecting an edge of entity.
186	Distribute Entities	Home/Modify	Distrubutes the selected entities.
187	Distribute Horizontally	It is located in the distribute toolbar.	Distrubutes selected entities to the horizontally.
188	Distribute Object Center	It is located in the distribute toolbar.	Distribute selected entities to the object center.
189	Distribute Nearest Point	It is located in the distribute toolbar.	Distribute selected entities to the nearest point.
190	Distribute Vertically	It is located in the distribute toolbar.	Distrubute selected entities to the vertically.

		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
191	Divide	Home/Modify	Divides the objects to the desired number.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
192	Divide-Combine All Intersections	Steel/Steel/Steel Purlin	Divides and combines on all intersections.
193	Divide-Combine Single Intersection	Steel/Steel/Steel Purlin	Divides and combines on selected intersections.
252	Dome	Home/Roof	Draws dome.
194	Dome Gutter	Facade/3D Geometric Object	Draws dome gutter.
195	Dome Gutter Settings	Facade/3D Geometric Object/Dome Gutter	Opens dome gutter settings.
196	Dome Settings	Home/Roof/Dome	Opens dome settings.
197	Door / Window Settings	Home/Door-Window/Door-Window	Opens door/Window settings.
		Facade/Door-Window/Door-Window
198	Door/Window	Home/Door-Window	Draws Door/Window.
		Facade/Door-Window
199	Dormer	Home/Roof	Draws dormer.
200	Dormer Dio	Home/Door-Window	Draws dormer window.
		Home/Roof/Dormer
		Facade/Door-Window
201	Dormer Settings	Home/Roof/Dormer	Opens dormer settings.
202	Double Angle Connection	Steel/Macro/Single Plate Connection	Creates a double angle connection.
203	Double Plate Seating Connection	Steel/Macro/Single Plate Connection	Creates a double plate seating connection.
204	Double Vault	Steel/Macro/Truss	Draws Double Vault Truss.
205	Drafting Mode	Tools/Tools	Enters drafting mode.
206	Draw Line Weights	View/View	Draw line weights.
207	Draw in Fast Mode	Steel/Macro	Draws connection in fast mode.
208	Draw Similar Entity	Right click menu	Draws similar entity of the selected one.
209	Draw Single Steel Brace	It is located in the steel brace toolbar.	Draws single steel brace.
210	Draw Slab Hole	It is located in the slab for steels toolbar.	Draws slab hole.
211	Draw Steel Brace	It is located in the steel brace toolbar.	Draws steel brace elements.
212	Draw Steel Brace Multiple Elements	It is located in the steel brace toolbar.	Draws steel brace with multiple steel elements.
213	Drawing List	View/Window	Display drawing list.
		Drawings/Window
214	Drawings	View/Window	Arrange drawings in the project.
215	Draws Curtain Wall Dio	Home/Door-Window	Draws curtain wall dio.
216	Eaves Haunch	Steel/Macro/Single Plate Connection	Creates a eaves haunch connection.
217	Edge Aligned Single Footing	It is located in the single footing toolbar.	Sets edge aligned single footing.
218	Edit Curtain Wall Item	Facade/Exterior Facade/Curtain Wall	Edits curtain wall item.
	Edit Door/Window Angles	It is located in the ODT Door/Window toolbar.	Edits door/window angle.
219	Edit Label Text	Modify/Entity Edit/Dimension	Edit label text.
220	Edit Material	Rendering/Render	Edits material of an object.
221	Edit Railing Elevations	Home/Entities/Railing	Edits railing elevations.
		Facade/Railing/Railing
222	Edit Slab Edge	It is located in the slab for steels toolbar.	Edit slab edge.
223	Edit Stair	Modify/Entity Edit/Stair	Edit stair.
224	Edit Surface Mapping	Rendering/Render	Edits surface mapping parameters.
225	Edit Text	Modify/Entity Edit	Edit text.
		Drawings/Text
226	Edit Walls	Modify/Entity Edit/Wall	Edit walls.
227	Elevation Line	Home/Terrain/Terrain Polygon	Draws elevation line for terrain.
228	Elevation Line	Drawings/Tools	Draws elevation line for elevation.
229	Elevation Line Settings	Drawings/Tools/Elevation Line	Elevation line settings.
230	Elevation Point	Home/Terrain/Terrain Polygon	Draws elevation point.
231	Ellipse Center-Corner	Drawings/Primitives/Ellipse Corners	Draws ellipse using center and corner.
232	Ellipse Corner	Drawings/Primitives	Draws ellipse using corner.
233	Ellipse Mid-Axis	Drawings/Primitives/Ellipse Corners	Draws ellipse using midpoint and axis.
234	Elliptical Arc Center-Corner	Drawings/Primitives/Ellipse Corners	Draws elliptical arc using center and corner.
235	Elliptical Arc Corners	Drawings/Primitives/Ellipse Corners	Draws elliptical arc using corners.
236	Elliptical Arc Mid-Axis-Angles	Drawings/Primitives/Ellipse Corners	Draws elliptical arc using midpoint and axis.
237	End Plate Shear Connection	Steel/Macro/Single Plate Connection	Creates an end plate shear connection.
238	End Plate Truss Connection	Steel/Macro/Single Plate Connection	Creates an end plate truss connection.
239	End Plate Truss Connection For Box/Tube	Steel/Macro/Single Plate Connection	Creates an end plate truss connection for box/tube.
240	Enter	Keyboard	Runs the command. It has functions in various command stages.
241	Entity From Primitives	Tools/Generate	Entity from primitives.
242	Entity Properties	Home/Modify	Changes entity properties.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Modify/Entities
		Drawings/Modify
243	Esc	Keyboard	Exits the found command.
244	Exchange Coordinates	It is located in the single footing toolbar.	Exchange coordinates.
245	Exit	ideCAD logo	Quits the application.
246	Explode	Home/Modify	Separates the blocks into sub-blocks.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
247	Explode Roof	Modify/Entity Edit/Roof	Explodes roof.
248	Explode Into Single Elements	It is located in the steel beam toolbar.	Explodes and groups multi-element entities into single elements.
		It is located in the steel purlin toolbar.
249	Export To AMP	Tools/Quantity Report/Export	Exports components as a database file To AMP.
250	Export To OSKA	Tools/Quantity Report/Export	Exports components as a database file To OSKA.
251	Export to ideRENDER	Rendering/Tools	Exports your drawing to ideRENDER.
252	Extend	Home/Modify	Line extends primitive objects such as arcs to another line or arc.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
253	Exterior Veneer	Facade/Exterior Facade	Draws exterior veneer.
254	Exterior Veneer Settings	Facade/Exterior Facade/Exterior Veneer	Exterior veneer settings.
255	Extruded Object	Home/Entities/3D Objects	Draws extruded object.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
256	FasciaBoard	Home/Roof/Roof Details	Draws fascia boards.
257	Fast Move	Home/Modify	Activates fast move.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
258	Fillet	Home/Modify	It connects two lines with an arc.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
259	Find & Replace	Tools/Tools	Finds entities based on their labels and change the labels.
260	Find Hatch Holes	It is located in the hatch toolbar.	Finds hatch holes.
261	Find in Perspective	Right click menu in perspective view	Finds the selected object which is in the plan window, in the perspective window and zooms the view to that object.
262	Find in Plan	Right click menu in plan view	Finds the selected object which is in the perspective window, in the plan window and zooms the view to that object.
263	Flange Plate Connection	Steel/Macro/Single Plate Connection	Creates a flange plate connection.
264	Flat	Steel/Macro/Truss	Draws Flat Truss.
265	Fly Mode	Right click menu in perspective view	Opens fly mode.
266	Formatted Text	Drawings/Text	Draws formatted text.
267	Free Dimension	Drawings/Dimension	Draws free dimension.
340	Free Dimension Settings	Drawings/Dimensions/Free Dimension	Opens free dimension settings.
268	Free Drawn	It is located in the sweep toolbar.	Sets free drawn.
269	Freehand	Drawings/Primitives	Draws freehand curve.
270	Free Mode Slab	Concrete/Concrete/Slab	Creates a free mode slab by selecting boundary entities manually.
271	Free Mode Zone	Home/Zone/Zone	Creates a free mode zone by selecting boundary entities manually.
272	Front	View/Perspective	Changes view to front.
273	General Sweep Settings	Facade/3D Geometric Object	Sweep settings.
274	Generate 2D Drawing	Tools/Generate	Generates a 2D simple drawing using current drawing.
		Drawings/Tools
275	Generate Vector Drawing	Tools/Generate	Generates vector drawing.
		Rendering/Tools
276	Get Elevation From Terrain	It is located in the terrain toolbar.	Get elevation from terrain.
277	Get Entity Settings	Home/Modify	Picks settings from entity.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Modify/Entities
		Drawings/Modify
278	Get Selection	Tools/Selection Groups	Gets currently selected entities.
279	Girt Connection	Steel/Macro/Single Plate Connection	Creates a girt connection.
280	Grid & Limits	View/View	Grid & limits settings.
281	Group List	Tools/Selection Groups	Groups selected entities and selects entities based on these groups.
359	Hall	Steel/Macro	Creates hall.
	Hall Macro Settings	Steel/Macro/Hall	Opens the hall settings.
360	Hand Rail	Steel/Macro	Creates steel hand rail.
	Hand Rail Macro Settings	Steel/Macro/Hand Rail	Opens the hand rail settings.
282	Hatch Hole	Drawings/Hatch	Draws hatch hole.
283	Hatch Settings	Drawings/Hatch/User Defined Hatch	Hatch settings.
284	Haunch	Steel/Macro/Single Plate Connection	Creates a haunch connection.
285	Hidden Line	View/View/Solid with Edges	Changes view detail to hidden line.
286	Hidden Line - Black & White	View/View	Changes view detail to hidden line black && white.
287	Hide/Show Edge	Modify/Entity Edit/Sweep	Hides/shows edge.
288	Hide/Show Edge Part	Modify/Entity Edit/Sweep	Hides/shows edge part.
289	Hip/Valley Rafter	Home/Roof/Roof Details	Draws hip/valley rafters.
290	Hole	Home/Terrain	Draws hole.
291	Horizontal Plan Section	Rendering/Tools	Opens horizontal plan section toolbar.
292	Horizontal Workplane	View/Workplane/Target Workplane	Creates a horizontal workplane.
293	IFC (Import)	Tools/Import-Export/Import	Imports IFC file. Merges file content with current project.
		ideCAD logo/Import
294	IFC (Export)	Tools/Import-Export/Export	Exports project to IFC.
		ideCAD logo/Export
295	II BV Report	Tools/Quantity Report	Creates II BV report.
296	Import Text	Drawings/Text	Imports text from a text file.
297	In background	Right click menu/Drawing order	Sends the selected object to the background.
298	In background of object	Right click menu/Drawing order	Sends the selected object behind a certain object.
299	In foreground	Right click menu/Drawing order	Sends the selected object to the foreground.
300	In foreground of object	Right click menu/Drawing order	Sends the selected object in front of a certain object.
301	Incline Objects	Modify/Entity Edit	Incline objects.
302	Include Beams	It is located in the dimension toolbar.	Includes beams into section dimension.
303	Include Details	It is located in the dimension toolbar.	Includes doors/windows into section dimension.
304	Include Slabs	It is located in the dimension toolbar.	Includes slabs into section dimension.
305	Inner Dimension	Drawings/Dimensions	Draws inner dimension.
380	Inner Dimension Settings	Drawings/Dimensions/Free Dimension	Opens inner dimension settings.
306	Input Units	Settings/Project Settings	Opens input units.
307	Insert Layout Block	Drawings/Layout Design/Create New Layout	Inserts a layout block.
308	Insertion Point	Home/Concrete/Stair	Changes insertion point.
		Concrete/Concrete/Stair
		It is located in the ODT door/window toolbar.
		It is located in the stair toolbar.
		It is located in the library toolbar.
309	Intersection Dimension	Drawings/Dimensions	Draws intersection dimension.
310	Invert Selection	Home/Edit	Inverts current selection.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
311	ideCAD Home	ideCAD logo	Opens the start page.
312	Jamb	Home/Door-Window/Door-Window	Draws jamb.
		Facade/Exterior Veneer
		Facade/Door-Window/Door-Window
313	Jamb Settings	Facade/Exterior Veneer/Jamb	Opens jamb settings.
314	Join	Home/Modify	Joins linear objects.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
315	Joining Plates Connection	Steel/Macro/Single Plate Connection	Creates a beam-beam connection (Joining plates).
316	L (Coordinate Box)	Coordinate Box	L enters the coordinate box. Object length is entered.
317	Label	Drawings/Dimension	Draws label.
318	Label Entities	Modify/Entity Edit	Label entities.
319	Lap Siding	It is located in the exterior veneer toolbar.	Draws lap siding.
320	Lap Siding with Gap	It is located in the exterior veneer toolbar.	Draws lap siding with gap.
321	Last Selection	Home/Edit	Selects last selected entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
322	Lath	Home/Roof/Roof Details	Draws laths.
323	Layer	Settings/Element Properties	Opens layer settings.
324	Layout Settings	Drawings/Layout Design/Create New Layout	Changes settings of current layout.
325	Left	View/Perspective	Changes view to left.
326	Left Middle Aligned Column	It is located in the column toolbar.	Sets edge left middle aligned.
327	Left Side	It is located in the dimension toolbar.	Left side section dimension.
328	Level Dimension	Drawings/Dimension	Draws level dimension.
398	Level Dimension Settings	Drawings/Dimensions/Level Dimension	Opens level dimension settings.
329	Library	Home/Entities	Draws library.
		Rendering/3D Geometric Objects
		Drawings/Primitives
330	Library Settings	Home/Entities/Library	Draws library settings.
		Rendering/3D Geometric Objects/Library
		Drawings/Primitives/Library
331	Load Settings	Settings/Project Settings	Loads settings from a file.
332	Local Undo	Tools/Edit	Local undo, undo for current mode only.
333	Lock/Unlock Layers	Modify/Layers	Locks/Unlocks layers.
334	Make Block	Home/Modify	Blocks entities.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
335	Make Compatible With Structural/Architectural	Tools/Edit	Make architectural file compatible with structural.
336	Materials	Settings/Element Properties	Materials are listed, edited, created.
		Rendering/Render
337	Menu	Settings/Menu Settings	Opens menu settings.
338	Metal Slab	Steel/Steel/Composite Slab	Draws metal slab.
339	Midpoint	Home/Snap	Snaps to midpoints of entities.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
340	Mirror	Home/Modify	Takes symmetry.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
341	Mirror Door/Window Label	It is located in the ODT door/window toolbar.	Mirrors door/window labels.
342	Mirror X	It is located in the ODT door/window toolbar.	Takes symmetry with respect to the X-axis.
		It is located in the column toolbar.
		It is located in the strip footing toolbar.
343	Mirror Y	Home/Concrete/Stair	Takes symmetry with respect to the Y-axis.
		Concrete/Concrete/Stair
		It is located in the ODT door/window toolbar.
344	Modify Truss Elements	It is located in the trusses toolbar.	Allow modify sub elements of truss.
345	Move	Home/Modify	Move.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
346	Move Axis Label	Home/Axis/Axis	Moves axis label.
		Concrete/Axis/Axis
		Steel/Axis/Axis
		Modift/Entity Edit
347	Move Dimension Text	Modify/Entity Edit/Dimension	Moves dimension texts.
348	Move Raft Foundation Text	It is located in the raft foundation toolbar.	Moves raft foundation text.
349	Move Slab Text	Modify/Entity Edit/Slab	Moves slab text.
434	Move Stair Text	Home/Door-Window/Stair	Moves stair text.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
350	Move Zone Text	Modify/Entity Edit/Zone	Moves zone text.
351	Multi Stiffener Plate	Steel/Macro/Single Plate Connection	Creates multi stiffener plates.
352	Multi Stiffener Plate (Horizontal)	Steel/Macro/Single Plate Connection	Creates horizontal multi stiffener plates.
353	Multiple Lines	Drawings/Primitives	Draws multiple lines.
354	Nearest Point	Home/Snap	Snaps to nearest points of entities.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
355	New	ideCAD logo	Opens the new project open dialog.
356	New 2D Window	ideCAD logo	Creates a new, empty 2D drawing window.
357	New Horizontal Plan Section	It is located in the horizontal plan section toolbar.	Adds new horizontal plan sections.
358	New Project	ideCAD logo	Creates a new project.
359	New Layout Block-All Drawing	Drawings/Layout Design/Create New Layout	Creates a new layout block using all drawing.
360	New Layout Block-Circle	Drawings/Layout Design/Create New Layout	Creates a new layout block
361	New Layout Block-Path Polygon	Drawings/Layout Design/Create New Layout	Creates a new layout block
362	New Layout Block-Polygon	Drawings/Layout Design/Create New Layout	Creates a new layout block
363	New Layout Block-Rectangle	Drawings/Layout Design/Create New Layout	Creates a new layout block
364	Next Window	View/Window	Activates next window.
365	Node Settings	View/Nodes	Opens node settings.
366	Notched Seating Connection	Steel/Macro/Single Plate Connection	Creates a notched seating connection.
367	NURBS	Drawings/Primitives	Draws NURBS curve.
367	Offset	Home/Modify	Offset.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
368	OK	It is located in the section toolbar.	Finishes the current job.
369	Open	ideCAD logo	Opens a previously saved project.
370	Ortho	Home/Snap	Enters orthogonal drawing mode.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
371	Outer Dimension	Drawings/Dimensions	Draws outer dimension.
457	Outer Dimension Settings	Drawings/Dimensions/Free Dimension	Opens outer dimension settings.
372	Page Down	Keyboard	Scrolls down the page in reports. Also shifts the viewpoint down in fly mode in the perspective view.
373	Page Up	Keyboard	Scrolls the page up in reports. Also shifts the viewpoint upwards in flight mode in the perspective view.
374	Pan	View/Zoom	Pans the window.
375	Parallel Reference	Home/Snap	Parallel reference.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
376	Paste	Home/Edit	Paste entities.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
377	Path	Drawings/Primitives	Draws path primitives.
378	Path Based	It is located in the sweep toolbar.	Sets path based.
379	Pattern Path	Drawings/Primitives	Draws pattern path.
380	Parametric Hatch	Drawings/Hatch	Draws parametric hatch.
381	Parent Based	It is located in the sweep toolbar.	Sets parent based.
382	Paste Contour	Tools/Edit	Pastes contours.
383	Paste From File	Tools/File Sharing	Pastes entities from a .blk file.
384	PDF (Export)	Tools/Import-Export/Export	Exports To PDF.
		ideCAD logo/Export
385	Pen Color	Settings/Element Properties	Opens pen and color settings.
386	Perpendicular Reference	Home/Snap	Perpendicular reference.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
387	Perspective	View/Perspective	Changes view to perspective.
388	Photometric Light	Rendering/Lights-Camera	Draws photometric light.
389	Photometric Light Settings	Rendering/Lights-Camera/Photometric Light	Photometric light settings.
390	Plan Screenshot	Tools/Import-Export/Export	Saves the screen image as a bitmap file.
		ideCAD logo/Export
391	Planar Texture Mapper	Rendering/Render	Creates Planar Texutre Mapper Object.
392	Plateau	Home/Terrain	Draws plateau.
393	Plot	ideCAD logo	Plots your drawings.
394	Point Light	Rendering/Lights-Camera	Draws point light.
395	Point Light Settings	Rendering/Lights-Camera/Point Light	Point light settings.
396	Polar Array	Home/Edit	Creates copies of objects with rotation.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
397	Polar Tracking	Settings/Project Settings	Polar tracking.
398	Polygon Column	Home/Concrete/Column	Draws polygon column.
		Concrete/Concrete
399	Polygon To Plate Section	Modify/Transform/Beam to Shearwall	Transforms primitive entities to plate section.
400	Polygonal Sheeting	Steel/Steel/Sheeting	Draws sheeting polygon.
401	Pool	Home/Entities	Draws pool.
402	Pool Settings	Home/Entities/Pool	Opens pool settings.
403	Post	Home/Roof/Roof Details	Draws a post.
404	Preferences	Home/Project Settings	Opens preferences.
		Settings/Project Settings
405	Previous Window	View/Window	Activates previous window.
406	Profiles	Settings/Element Properties	Opens profiles
407	Project	Settings/Project Settings	Open project settings.
408	Project Save Settings	Settings/Project Settings	Open project save settings.
409	Project Settings	Home/Project Settings	Opens project settings.
		Concrete/Project Settings
		Steel/Project Settings
410	Purlin	Home/Roof/Roof Details	Draws purlins.
411	Purlin Connection	Steel/Macro/Single Plate Connection	Creates a purlin connection.
511	Quad Stiffener Plate	Steel/Macro/Single Plate Connection	Creates stiffener plates.
412	Quantity Report	Tools/Quantity Report	Generates a report of quantities in the project.
413	R Purlin	Steel/Steel/Steel Purlin	Draws R purlin.
414	Radius Dimension	Drawings/Dimension	Draws radius dimension.
514	Radius Dimension Settings	Drawings/Dimensions/Level Dimension	Opens radius dimension settings.
415	Raft	Concrete/Foundation	Draws raft foundation.
416	Raft Edge	Concrete/Foundation	Draws raft edge.
417	Raft Edge Settings	Concrete/Foundation/Raft Edge	Opens raft edge settings.
418	Raft Foundation Hole	Concrete/Foundation/Raft	Draws raft foundation hole.
419	Raft Foundation Settings	Concrete/Foundation/Raft	Opens raft foundation settings.
420	Rafter	Home/Roof/Roof Details	Draws rafters.
421	Railing	Home/Entities	Draws railing.
		Facade/Railing
422	Railing 3D	Home/Entities/Railing	Draws 3D railing.
423	Railing Over Objects	Home/Entities/Railing	Draws 3D railing over objects.
424	Railing Settings	Home/Entities/Railing	Opens railing settings.
		FacadeRailing/Railing
425	Rainwater Pipe	Home/Roof	Draws rainwater pipe.
426	Rainwater Pipe Settings	Home/Roof/Rainwater Pipe	Opens rainwater pipe settings.
427	Raster Image	Drawings/Primitives	Places a raster image file onto the drawing.
428	Recall Last Render	Rendering/Render	Recalls render with the last settings.
429	Rectangle	Drawings/Primitives/Multiple Lines	Draws a rectangle.
430	Rectangular Wall	Home/Wall	Draws 4walls as a rectangle.
431	Redo	Tools/Edit	Redo.
432	Remove End Cut Of Edge	Modify/Entity Edit/Sweep	Removes end cut of edge.
433	Remove From Selection Group	Right click menu	Removes objects from the group.
434	Remove Inner Cut Of Edge	Modify/Entity Edit/Sweep	Removes inner cut of edge.
435	Remove Local Offset Of Edge	Modify/Entity Edit/Sweep	Removes local offset of edge.
436	Remove Nodule	It is located in the space truss toolbar.	Removes a nodule from space truss.
437	Remove Offset Of Edge	Modify/Entity Edit/Sweep	Removes offset of edge.
438	Remove Point	It is located in the hatch toolbar.	Removes an existing point on the hatch.
439	Render	Rendering/Render	Renders active view.
441	Reset Dimension Texts	Modify/Entity Edit/Dimension	Resets dimension text displacements.
442	Reset Settings	Settings/Project Settings	Resets settings.
443	Revision Cloud	Drawings/Primitives	Draws revision cloud.
444	Revolved Object	Home/Entities/3D Objects	Draws revolved object.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
445	Right	View/Perspective	Changes view to right.
446	Right Side	It is located in the dimension toolbar.	Right side section dimension.
447	Rigid on Both Axis Base Plate	Steel/Macro/Single Plate Connection	Creates a rigid on both axis base plate connection.
448	Rigid on Strong Axis Base Plate	Steel/Macro/Single Plate Connection	Creates a rigid on strong axis base plate connection.
449	Roof	Home/Roof	Draws roof.
		Modify/Entity Edit
450	Roof Details	It is located in the roof toolbar.	Opens the roof details toolbar.
451	Roof Gutter	Facade/3D Geometric Object	Draws roof gutter.
452	Roof Gutter Settings	Facade/3D Geometric Object/Roof Gutter	Opens roof gutter settings.
453	Roof Hole	Home/Roof/Roof	Draws roof hole.
454	Roof Plane	Home/Roof/Roof	Draws roof plane.
455	Roof Settings	Home/Roof/Roof	Opens roof settings.
456	Roof Window	Home/Door-Window	Draws roof window.
		Home/Roof/Roof
		Facade/Door-Window
457	Rotate	Home/Modify	Rotate.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
458	Rotate Building	Home/Modify	Rotates the building.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Tools/Tools
		Drawings/Modify
459	Rotate Curtain Wall Panel	Facade/Exterior Veneer/Curtain Wall	Rotates curtain wall panel.
460	Rotate Node	Home/Modify	Rotates node.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
461	Round Plate Tube Base Plate	Steel/Macro/Single Plate Connection	Creates a round plate tube base plate connection.
462	Save	ideCAD logo	Saves current project.
463	Save As	ideCAD logo	Save current project with a new name.
464	Save Compact	ideCAD logo	Saves compresed project file.
465	Save Old Version	ideCAD logo	Saves old version project file.
	Save Screen Image	ideCAD logo	Saves the screen image as a bitmap file.
466	Save Settings	Settings/Project Settings	Saves settings to a file.
467	Save Stair	Home/Concrete/Stair	Saves stair.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
468	Scale	Home/Modify	Scales entities.
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
469	Scale by Referance	Home/Modify	Scales entities by referance.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
470	Seating Support Connection	Steel/Macro/Single Plate Connection	Creates a seating support connection(8).
471	Seating Truss Connection	Steel/Macro/Single Plate Connection	Creates a seating truss connection.
472	Seating Weld Connection	Steel/Macro/Single Plate Connection	Creates a seating weld connection.
473	Secondary Stair Deformation	Modify/Entity Edit/Stair	Secondary stair deformation.
474	Secondary Steel Beam	Steel/Steel	Draws secondary beam.
475	Section / Elevation List	Tools/Generate	Edit and generate sections and elevations.
		Drawings/Tools	Edit and generate sections and elevations.
476	Section Dimension	It is located in the dimension toolbar.	Draws single section dimension.
477	Section Dimension Group	It is located in the dimension toolbar.	Draws section dimension group.
478	Section Elevation	Drawings/Dimension	Draws section elevation.
479	Section Elevation Settings	Drawings/Tools	Opens section elevation settings.
480	Section Line	Drawings/Tools	Draws section line.
481	Section Line Settings	Drawings/Tools/Section Line	Opens section line settings.
482	Select All	Home/Edit	Selects all entitites.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
483	Select Analysis Part	Steel/Steel/Steel Purlin	Select purlins to add analysis.
484	Select Entity In All Stories	Home/Edit	Selects entity in all stories.
		Facade/Edit
		Concrete/Edit
		Steel/Edit
		Drawings/Edit
485	Select Object Group	Right click menu	Select the objects in the group.
486	Select Terrain and Child Entities	It is located in the terrain toolbar.	Selects terrain and child entities.
487	Set Auto Elevation	It is located in the library toolbar.	Set auto elevation.
488	Set Entity Settings	Home/Modify	Sets default settings to selected entities.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Modify/Entities
		Drawings/Modify
489	Set Hatch Reference	Modify/Entity Edit	Sets hatch reference point.
490	Set Local CS	Home/Snap	Sets new local coordinate system.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
491	Set Pool Cantilever Slab Properties	Home/Entities/Pool	Set pool cantilever slab properties.
		Modify/Entity Edit/Pool
492	Set Pool Surface Properties	Home/Entities/Pool	Set pool surface properties.
		Modify/Entity Edit/Pool
493	Set Pool Surface Slope	Home/Entities/Pool	Set pool surface slope.
		Modify/Entity Edit/Pool
494	Set Pool Wall Properties	Home/Entities/Pool	Set pool wall properties.
		Modify/Entity Edit/Pool
495	Set Selection	Tools/Selection Groups	Sets currently selected entities.
496	Set Stair Boundary Conditions	Concrete/Concrete/Stair	Sets boundary conditions of stairs.
497	Set Steel Delta	It is located in the steel column toolbar.	Sets steel element delta.
		It is located in the steel beam toolbar.
498	Set Trim Algorithm	Modify/Entity Edit	Sets entity trim algorithm.
499	Set Wall Priority	Modify/Entity Edit	Sets priorities of wall at joints.
500	Shearwall	Home/Concrete	Draws shearwall.
		Concrete/Concrete
501	Shearwall Settings	Home/Concrete/Shearwall	Opens shearwall settings.
		Concrete/Concrete/Shearwall
502	Shearwall To Beam	Modify/Transform/Beam to Shearwall	Converts shearwalls to beams.
503	Sheeting	Steel/Steel	Draws sheeting over purlins.
504	Sheeting Between Elements	Steel/Steel/Sheeting	Draws sheeting between two elements.
505	Show Coordinate Box	View/View	Show coordinate box.
506	Show Safe Frame	Right click menu in the perspective view.	Shows the render boundaries before rendering.
507	Show Toolbars	View/View	Show toolbars.
508	Show/Hide Dimension Text	Modify/Entity Edit/Dimension	Shows/hides dimension text.
509	Show/Hide Layers	Modify/Layers	Show/hide entity layers.
510	Show/Hide Nodes	View/Nodes	Shows/hides nodes
511	Show/Hide Railing	Home/Concrete/Stair	Shows/hides railings.
		Concrete/Concrete/Stair
		Modify/Entity Edit/Stair
512	Simple Base Plate	Steel/Macro/Single Plate Connection	Creates a simple base plate connection.
513	Single	Concrete/Foundation	Draws single footing.
514	Single Angle Connection	Steel/Macro/Single Plate Connection	Creates a single angle connection.
515	Single Footing Settings	Concrete/Foundation/Single	Opens single footing settings.
516	Single Plate Connection	Steel/Macro/Single Plate Connection	Creates a single plate connection.
517	Single Plate Seating Connection	Steel/Macro/Single Plate Connection	Creates a single plate seating connection.
518	Single Purlin	Steel/Steel/Steel Purlin	Draws single steel purlin.
519	Single Secondary Steel Beam	It is located in the steel beam toolbar.	Draws single secondary beam.
520	Slab	Concrete/Concrete	Draws slab.
521	Slab Edge	Concrete/Concrete	Draws slab edge.
522	Slab Edge Settings	Concrete/Concrete/Slab Edge	Opens slab edge settings.
523	Slab Hole	Concrete/Concrete/Slab	Draws slab hole.
524	Slab Settings	Concrete/Concrete/Slab	Opens slab settings.
525	Sloping Flat	Steel/Macro/Truss	Draws Sloping Flat Truss.
526	Sloping Vault	Steel/Macro/Truss	Draws Sloping Vault Truss.
527	Snap to Grid	Home/Snap	Snap to grid.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
528	Snap to Nodes	Home/Snap	Snap to nodes.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
529	Solid	View/View	Changes view detail to solid.
530	Solid with Edges	View/View	Changes view detail to solid with edges.
531	Space	Keyboard	Moves the cursor to horizontal, vertical, and free axis drawing positions on axes. Changes the offset in commands such as wall, column, beam, shearwall. Skips a name in object labeling. Changes the insertion point in commands such as stair, library.
532	Space Purlin	Steel/Steel/Steel Purlin	Draws space purlin.
533	Space Truss	Steel/Macro	Draws space truss.
534	Spacer Plate Connection	Steel/Macro/Single Plate Connection	Creates a spacer plate connection.
535	Sphere	Home/Entities/3D Objects	Draws sphere.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
536	Splice Connection	Steel/Macro/Single Plate Connection	Creates a splice connection.
537	Spot Light	Rendering/Lights-Camera	Draws spotlight.
538	Spot Light Settings	Rendering/Lights-Camera/Spot Light	Opens spot light settings.
539	Stair	Home/Concrete	Draws stair.
		Concrete/Concrete
707	Stair (Steel)	Steel/Macro	Creates steel stair.
	Stair Macro Settings	Steel/Macro/Stair	Opens the steel stair settings.
540	Stair Settings	Home/Concrete/Stair	Opens stair settings.
		Concrete/Concrete/Stair
541	Stay Connection	Steel/Macro/Single Plate Connection	Creates a stay connection.
542	Stay Connection (Secondary Beam)	Steel/Macro/Single Plate Connection	Craetes a stay connection (secondary beam).
543	Steel Beam	Steel/Steel	Draws steel beam.
544	Steel Brace	Steel/Steel	Draws steel brace.
545	Steel Column	Steel/Steel	Draws steel column.
546	Steel Column 2 Points	It is located in th steel column toolbar.	Draws steel column.
547	Steel Purlin	Steel/Steel	Draws steel purlin.
548	Steel Tie	Steel/Steel/Steel Purlin	Draws steel tie.
549	Stiffened End Plate Connection	Steel/Macro/Single Plate Connection	Creates a stiffened end plate connection.
550	Stiffened Shear Plate Connection	Steel/Macro/Single Plate Connection	Creates a stiffened shear plate connection.
551	Story	Settings/Project Settings	Arrange stories in the project.
552	Story Alignment Free	It is located in the sweep toolbar.	Sets story alignment free.
553	Story Bottom Aligned	It is located in the sweep toolbar.	Sets story bottom aligned.
554	Story Copy	Home/Project Settings	Copies all entities from a story to another story.
		Concrete/Project Settings
		Steel/Project Settings
		Tools/Edit
555	Story List	Home/Project Settings	Opens story list.
		Concrete/Project Settings
		Steel/Project Settings
		View/Window
		Drawings/Window
556	Story Settings	Home/Project Settings	Arrange stories in the project.
		Concrete/Project Settings
		Steel/Project Settings
557	Story Top Aligned	It is located in the sweep toolbar.	Sets story top aligned.
558	Stretch Node	Home/Modify	Stretch node.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
559	Strip	Concrete/Foundation	Draws multiple strip footings.
560	Strip Footing Settings	Concrete/Foundation/Strip	Opens strip footing settings.
561	Structural Design Mode	View/Mode	Enters structural design mode.
562	Strut	Home/Roof/Roof Details	Draws a strut.
563	Stub	Steel/Macro/Single Plate Connection	Creates stub.
564	Sub Region	Home/Terrain	Draws sub region.
565	Swap Side	It is located in the exterior veneer toolbar.	Swaps side.
566	Sweep	Home/Entities/3D Objects	Draws sweep.
		Facade/3D Geometric Objects/3D Objects
		Modify/Entity Edit
		Rendering/3D Geometric Objects
567	Sweep Operations	It is located in the sweep toolbar.	Opens the sweep operations toolbar.
568	Switch Windows	Drawings/Window	Returns to last story window.
569	T Plate Connection	Steel/Macro/Single Plate Connection	Creates a T plate connection.
570	Tangent	Home/Snap	Draws tangents.
		Facade/Snap
		Concrete/Snap
		Steel/Snap
		Drawings/Snap
571	Target Workplane	View/Workplane	Creates a free workplane using existing objects.
572	Terra Cotta Siding	It is located in the exterior veneer toolbar.	Draws terra cotta siding.
573	Terrain Polygon	Home/Terrain	Draws terrain polygon.
574	Terrain Settings	Home/Terrain/Terrain Polygon	Opens terrain settings.
575	Text	Rendering/3D Geometric Objects/3D Text	Draws text.
		Drawings/Text
576	Text Settings	Rendering/3D Geometric Objects/3D Text	Opens font settings.
		Drawings/Text/Text
577	Tip of the Day	ideCAD logo/Help	Shows tip of the day.
578	Toggle Fullscreen	View/Window	Resizes the view to full screen.
579	Top	View/Perspective	Changes view to perspective.
580	Transform To Ribbed Slab	Concrete/Concrete/Slab	Transforms a slab to a ribbed slab.
		Modify/Entity Edit/Slab
581	Transform To Waffle Slab	Concrete/Concrete/Slab	Transforms a slab to a waffle slab.
		Modify/Entity Edit/Slab
582	Transparent Story	View/View	Opens transparent story settings dialog.
583	Trapezoid Sloping Left	Steel/Macro/Truss	Draws Trapezoid Sloping Left Truss.
584	Trapezoid Sloping Right	Steel/Macro/Truss	Draws Trapezoid Sloping Right Truss.
585	Trapezoid Sloping Symmetric	Steel/Macro/Truss	Draws Trapezoid Sloping Symmetric Truss.
586	Trapezoid Slopping Asymmetric	Steel/Macro/Truss	Draws Trapezoid Slopping Asymmetric Truss.
587	Trapezoid Type 1	Steel/Macro/Truss	Draws Trapezoid Type 1 Truss.
588	Trapezoid Type 2	Steel/Macro/Truss	Draws Trapezoid Type 2 Truss.
589	Trapezoid Vault	Steel/Macro/Truss	Draws Trapezoid Vault Truss.
590	Triangular Asymmetric	Steel/Macro/Truss	Draws Triangular Asymmetric Truss.
591	Triangular Sloping Left	Steel/Macro/Truss	Draws Triangular Sloping Left Truss.
592	Triangular Sloping Right	Steel/Macro/Truss	Draws Triangular Sloping Right Truss.
593	Triangular Symmetric	Steel/Macro/Truss	Draws Triangular Symmetric Truss.
594	Trim	Home/Modify	Line cuts primitive objects such as arcs to another line or arc.
		Facade/Modify
		Concrete/Modify
		Steel/Modify
		Drawings/Modify
595	Trim Column	Modify/Entity Edit/Column	Trims column edges with an axis or beam.
596	Trim To Roof	Home/Roof/Roof	Trims entities with roofs.
		Modify/Entity Edit/Roof
		Tools/Tools
597	Trim/Extend Wall	Home/Wall/Wall	Trims/extends walls.
		Modify/Entity Edit/Wall
598	Trimmer	Home/Roof/Roof Details	Draws a trimmer.
599	Truss	Steel/Macro	Draws Custom Truss.
600	Truss Connection	Steel/Macro/Single Plate Connection	Creates a truss connection.
601	Tube	Home/Entities/3D Objects	Draws tube.
		Facade/3D Geometric Objects/3D Objects
		Rendering/3D Geometric Objects
602	Tube Base Plate	Steel/Macro/Single Plate Connection	Creates a tube base plate connection.
603	Undo	Tools/Edit	Undo.
604	Unstiffened Seated Connection	Steel/Macro/Single Plate Connection	Creates an unstiffened seated connection.
605	Update Layout Block	Drawings/Layout Design/Create New Layout	Updates linked layout blocks.
606	Update Library Elevation	Home/Entities/Library	Update library elevation.
		Rendering/3D Geometric Objects/Library
607	Update Railing 3D	Home/Entities/Railing	Updates 3D railing.
		Rendering/Railing/Railing
608	Use Distance	It is located in the ODT door/window toolbar.	Use distance.
609	Use Dio Reference	It is located in the ODT door/window toolbar.	Use dio as reference.
610	User Defined Hatch	Drawings/Hatch	Draws user defined hatch.
611	User Defined Tube	It is located in the tubes toolbar.	Draws user defined tube.
612	Vault (Concrete)	Home/Roof	Draws vault.
613	Vault (Steel)	Steel/Macro/Truss	Draws Vault Truss.
614	Vault Settings	Home/Roof/Vault	Opens vault settings.
615	Vertical Workplane	View/Workplane/Target Workplane	Creates a vertical workplane.
616	View Settings	View/View	Opens view settings.
617	Viewport Configuration	View/Window	Display view configuration options.
618	Wall	Home/Wall	Draws wall.
		Modify/Wall
619	Wall Based	It is located in the sweep toolbar.	Sets wall based.
620	Wall Settings	Home/Wall/Wall	Opens wall settings.
621	Wavefront .OBJ (Import)	Tools/Import-Export/Import	Import .obj files.
		ideCAD logo/Import
3	Wavefront.OBJ (Export)	Tools/Import-Export/Export	Exports to OBJ file format.
		ideCAD logo/Export
622	Welded Box/Tube Connection	Steel/Macro/Single Plate Connection	Creates a welded box/tube connection.
623	Welded Connection	Steel/Macro/Single Plate Connection	Creates Welded Connection.
624	Welded Flange Plate Connection	Steel/Macro/Single Plate Connection	Creates a welded flange plate connection.
625	Welded Web Connection	Steel/Macro/Single Plate Connection	Creates a welded web connection.
626	Wind Connection	Steel/Macro/Single Plate Connection	Creates a wind connection.
627	X (Coordinate Box)	Coordinate Box	Enters the X coordinate box. X coordinate is entered.
628	Y (Coordinate Box)	Coordinate Box	Enters the Y coordinate box. Y coordinate is entered.
629	Zone	Home/Zone	Draws zone.
		Modify/Entity Edit
630	Zone Edge	Home/Zone	Draws zone edge.
631	Zone Hole	Home/Zone	Draws zone hole.
632	Zone List	Home/Zone	Draws zone list.
633	Zone Edge Settings	Home/Zone/Zone Edge	Opens zone edge settings.
634	Zone Hole Settings	Home/Zone/Zone Hole	Opens zone hole settings.
635	Zone List Settings	Home/Zone/Zone List	Opens zone list settings.
636	Zone Settings	Home/Zone/Zone	Opens zone settings.
637	Zoom	View/Zoom	Zooms the window.
638	Zoom Extents	View/Zoom	Zooms to the extents of the drawings.
639	Zoom Selection	View/Zoom	Zoom selection.
640	Zoom Window	View/Zoom	Zoom into a rectangular window.
641	Zoom In (+)	Keyboard	Zooms in.
642	Zoom Out (-)	Keyboard	Zooms out.

Next Topic

List of ideCAD Structural Commands