List of ideCAD Structural Commands
The list of commands available in the ideCAD Structural package program is given below in alphabetical order (Base version: 11.11)
Command | Location of command in ribbon menu or toolbar | Explanation | |
---|---|---|---|
1 | Concrete/Structural Inspection/Modal | Shows deformation 1.4G+1.6Q visualization dialog page. | |
|
| Steel/Structural Inspection/Modal |
|
|
| Structural Inspection/Deformation |
|
2 | Concrete/Create Drawings/Steel | Draws steel 3D isometric view. | |
|
| Steel/Create Drawings/Steel |
|
|
| Drawings/Create Drawings/Steel |
|
3 | Tools/Import-Export/Export | Exports to OBJ file format. | |
|
| ideCAD logo/Export |
|
4 | View/Workplane/Target Workplane | Creates a workplane through 3 points. | |
5 | Connection/Connection/4 Bolts Unstiffened End Plate Connection | Creates a 4 bolts stiffened end plate connection. | |
6 | Connection/Connection | Creates a 4 bolts unstiffened end plate connection. | |
7 | Connection/Connection/4 Bolts Unstiffened End Plate Connection | Creates a 8 bolts stiffened end plate connection. | |
8 | About ideCAD Structural | ideCAD logo/Help | It gives the program version and usage license information. |
9 | Drawings/Snap | Uses defined local coordinate system. | |
10 | Right click menu in perspective view | Creates snap points on a line in a perspective image. | |
11 | It is located in the hatch toolbar. | Adds lines to the hatch edges. | |
12 | It is located in the hatch toolbar. | Adds a new point to hatch. | |
13 | Concrete/Concrete/Stair | Adds stair area to an existing stair. | |
14 | Right click menu | Adds new objects to previously created groups. | |
15 | Modify/Entity Edit/Dimension | Adds/removes dimension parents. | |
16 | Drawings/Edit | Generates array of entities. | |
17 | Drawings/Snap | Enables advanced snap mode. | |
18 | Settings/Settings | Edits commands used on the command line. | |
19 | It is located in the align toolbar. | Aligns the selected entities at the bottom. | |
20 | It is located in the align toolbar. | Aligns the selected entities by drawing a path. | |
21 | It is located in the align toolbar. | Align the selected entities by selecting an edge of entity. | |
22 | Drawings/Modify | Aligns the selected entities. | |
23 | It is located in the align toolbar. | Aligns the selected entities to the left. | |
24 | It is located in the align toolbar. | Aligns the selected entities to the object center. | |
25 | It is located in the align toolbar. | Aligns the selected entities to the nearest point. | |
26 | It is located in the align toolbar. | Aligns the selected entities to the right. | |
27 | It is located in the align toolbar. | Aligns the selected entities to the top. | |
28 | Concrete/Analysis/Analysis Design | Does a complete analysis and structural design. | |
|
| Steel/Analysis/Analysis Design |
|
|
| Analysis and Design/Analysis/Analysis Design |
|
|
| Structural Inspection/Analysis/Analysis Design |
|
29 | Concrete/Structural Inspection | Shows analysis model visualization dialog page. | |
|
| Steel/Structural Inspection |
|
|
| View/View |
|
|
| Structural Inspection/View |
|
30 | Concrete/Project Settings | Opens analysis settings. | |
|
| Steel/Project Settings |
|
|
| Analysis and Design/Building |
|
31 | Concrete/Reports/Concrete/Structure Summary | Reports the settings based on the analysis. | |
|
| Steel/Reports/Concrete/Structure Summary |
|
32 | Tools/Reference | Measures the angle. | |
|
| Drawings/Reference |
|
33 | Coordinate Box | A enters the coordinate box. Angle is entered. | |
34 | Drawings/Dimensions | Draws angle dimension. | |
35 | Drawings/Dimensions/Level Dimension | Opens angle dimension settings. | |
36 | It is located in the library toolbar. | Sets vertical angle of library automatically using underlying geometry. | |
37 | Connection/Experimentals/Haunch | Creates a apex type connection. | |
38 | Concrete/Create Drawings/Steel | Draws steel application plan. | |
|
| Steel/Create Drawings/Steel |
|
|
| Drawings/Create Drawings/Steel |
|
39 | It is located in the primitives toolbar. | Draws arc. | |
40 | Concrete/Axis | Draws arc axis. | |
|
| Steel/Axis |
|
41 | Concrete/Axis | Draws arc axis through 3 points. | |
|
| Steel/Axis |
|
42 | Concrete/Concrete | Draws arc beam. | |
43 | Objects/Roof/Dome | Draws arc dome. | |
44 | Objects/Roof/Dome | Draws arc dome through 3 points. | |
45 | Concrete/Scaffolding/Scaffolding Macro | Creates arc scaffolding. | |
46 | Concrete/Concrete/Slab | Draws arc slab band. | |
47 | Concrete/Concrete/Slab Edge | Draws arc slab edge. | |
48 | It is located in the primitives toolbar. | Draws arc through 3 points. | |
49 | It is located in the wall toolbar. | Draws arc wall. | |
50 | Tools/Reference | Calculates area. | |
|
| Drawings/Reference |
|
51 | Drawings/Edit | Generates an array of entities. | |
52 | Tools/Reference | Area of steel calculator. | |
53 | Structural Inspection/Shell Elements/AS1 Visible | Shows shell AS1 under visualization dialog page. | |
54 | Structural Inspection/Shell Elements/AS1 Visible | Shows shell AS1 upper visualization dialog page. | |
55 | Structural Inspection/Shell Elements | Shows shell AS1 visible visualization dialog page. | |
56 | Structural Inspection/Shell Elements/AS2 Visible | Shows shell AS2 under visualization dialog page. | |
57 | Structural Inspection/Shell Elements/AS2 Visible | Shows shell AS2 upper visualization dialog page. | |
58 | Structural Inspection/Shell Elements | Shows shell AS2 visible visualization dialog page. | |
59 | Concrete/Create Drawings/Steel | Draws steel assembly. | |
|
| Steel/Create Drawings/Steel |
|
|
| Drawings/Create Drawings/Steel |
|
60 | Concrete/Create Drawings/Steel | Draws steel assembly with single parts. | |
|
| Steel/Create Drawings/Steel |
|
|
| Drawings/Create Drawings/Steel |
|
61 | Modify/Entity Edit | Auto label entities. | |
|
| Tools/Tools |
|
62 | Concrete/Analysis/Analysis Design | Turns automatic analysis system generation on/off. | |
|
| Steel/Analysis/Analysis Design |
|
|
| Analysis and Design/Analysis/Analysis Design |
|
63 | It is located in the hatch toolbar. | Creates hatch with closed polygons. | |
64 | Concrete/Structural Inspection/Moment 3-3 | Shows frame axial force visualization dialog page. | |
|
| Steel//Structural Inspection/Moment 3-3 |
|
|
| Structural Inspection/Frame Results |
|
65 | Structural Inspection/Shearwall | Shows shearwall axial force visualization dialog page. | |
66 | Concrete/Axis | Draws axis. | |
|
| Steel/Axis |
|
67 | Modify/Entity Edit/Move Axis Label | Sets the axis border. | |
68 | Concrete/Create Drawings/Steel | Draws steel axis and frontal view. | |
|
| Steel/Create Drawings/Steel |
|
|
| Drawings/Create Drawings/Steel |
|
69 | It is located in the axis toolbar. | Draws an axis with an offset to the previous axis drawn. | |
70 | Concrete/Axis/Axis | Opens axis settings. | |
|
| Steel/Axis/Axis |
|
71 | View/Perspective | Changes view to axonometric. | |
72 | View/Perspective | Changes view to back. | |
73 | Steel/Steel | Draws steel beam. | |
74 | Concrete/Concrete | Draws concrete beams. | |
75 | Concrete/Design/Concrete | Display the calculation results of the beams and the selected reinforcements. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Concrete Design |
|
76 | Concrete/Design/Steel | Display steel beam design results. | |
|
| Steel/Design/Steel |
|
|
| Analysis and Design/Steel Design |
|
77 | Concrete/Reports/Concrete | Display beam general report. | |
|
| Steel/Reports/Concrete |
|
|
| Reports/Concrete |
|
78 | Concrete/Create Drawings/Concrete | Prepares beam drawings. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
79 | Structural Inspection/Input | Shows concrete design in beam live loads visualization dialog page. | |
80 | Analysis and Design/Design Parameters/Concrete | Opens beam parameters. | |
81 | Concrete/Concrete/Beam | Opens beam settings. | |
82 | Modify/Transform | Converts beams to shearwalls. | |
83 | Structural Inspection/Input/Steel | Shows steel design in beam live loads visualization dialog page. | |
84 | Structural Inspection/Output/Concrete All Failures | Shows concrete design out bearing capacity failure visualization dialog page. | |
85 | Drawings/Primitives/NURBS | Draws bezier curve. | |
86 | Drawings/Hatch | Draws bitmap hatch. | |
87 | Connection/Connection | Creates a bolted flange plate connection. | |
88 | Objects/Roof/Vault | Draws border vault. | |
89 | View/Persoective | Changes view to bottom. | |
90 | Connection/Experimentals/Multi Stiffener Plate | Creates box/tube cap plate. | |
91 | Connection/Experimentals/Box-Tube Splice Connection | Creates a box/tube end plate connection. | |
92 | Connection/Experimentals/Welded Connection | Creates a box/tube seating connection. | |
93 | Connection/Experimentals | Creates a box/tube splice connection. | |
94 | Steel/Steel | Draws steel brace. | |
95 | Concrete/Design/Steel | Display steel brace design results. | |
|
| Steel/Design/Steel |
|
|
| Analysis and Design/Steel Design |
|
96 | Connection/Connection/Brace Corner Connection | Creates a brace center connection. | |
97 | Connection/Connection | Creates a brace corner connection. | |
98 | Drawings/Modify | Breaks off a certain part of the objects. | |
99 | Concrete/Axis/Axis | Calculates contour polygon. | |
|
| Steel/Axis/Axis |
|
|
| Modify/Entity Edit/Move Axis Label |
|
100 | Modify/Entity Edit/Stair | Cancels secondary stair deformation. | |
101 | Modify/Entity Edit/Stair | Cancels stair deformations. | |
102 | Concrete/Reports/Steel | Creates castellated beam design report. | |
|
| Steel/Reports/Steel |
|
|
| Reports/Steel |
|
103 | It is located in the column toolbar. | Sets center aligned. | |
104 | It is located in the single footing toolbar. | Sets centered single footing. | |
105 | Drawings/Modify | Connects two lines with a third line. | |
106 | Concrete/Axis | Changes axis drawing type. | |
|
| Steel/Axis |
|
107 | Modify/Entity Edit/Stair | Changes baluster count. | |
|
| Concrete/Concrete/Stair |
|
108 | Modify/Entity Edit/Column | Changes column dimensions. | |
109 | Concrete/Concrete | Changes validity extent and/or moves concrete calculation line. | |
|
| Concrete/Foundation |
|
|
| ModifyEntity Edit/Slab |
|
110 | It is located in the ODT door/window toolbar. | Change dio distance point. | |
111 | Modify/Layers | Changes layers of selected entities. | |
112 | Modify/Entity Edit/Column | Changes column jacket edge thickness. | |
113 | Right click menu in plan view. | Changes layers of selected entities. | |
114 | It is located in the roof details toolbar. | Changes rafter dimensions. | |
115 | It is located in the roof toolbar. | Changes roof edge properties. | |
116 | Concrete/Concrete/Shearwall | Changes shearwall length. | |
117 | ideCAD logo/Help | Check for updates. | |
118 | Tools/Tools | Checks validity of project geometry. | |
|
| Structural Inspection/Output |
|
119 | Drawings/Primitives | Draws circle. | |
120 | Concrete/Concrete/Beam | Draws circle beam. | |
121 | Concrete/Concrete/Slab Edge | Draws circle slab edge. | |
122 | It is located in the wall toolbar. | Draws circle wall. | |
123 | Concrete/Concrete | Draws circular columns. | |
124 | Modify/Transform/Beam to Shearwall | Converts circular columns to rectangular columns. | |
125 | Concrete/Design/Steel | Performs a 3D clash check. | |
|
| Steel/Design/Steel |
|
|
| Analysis and Design/Steel Design |
|
126 | Drawings/Edit | Clones (immediately copies) objects. | |
127 | Close | ideCAD logo | Closes current project. |
128 | Right Click Menu | Closes the layer of the object. | |
129 | Drawings/Primitives/NURBS | Draws closed bezier curve. | |
130 | Drawings/Primitives/NURBS | Draws closed NURBS curve. | |
131 | Modify/Transform/Beam to Shearwall | Transforms primitive entities to polygon column. | |
132 | Modify/Transform/Beam to Shearwall | Transforms primitive entities to polygon section. | |
133 | Collapse All | Right click menu in structure tree. | Collapses all structure tree items. |
134 | Objects/Roof | Draws a collar beam. | |
135 | Concrete/Concrete | Draws rectangular column. | |
136 | Steel/Steel | Draws steel column. | |
137 | Concrete/Design/Concrete | Column reinforcements. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Concrete Design |
|
138 | Concrete/Design/Steel | Display steel column design results. | |
|
| Steel/Design/Steel |
|
|
| Analysis and Design/Steel Design |
|
139 | Concrete/Reports/Concrete | Display column general report. | |
|
| Steel/Reports/Concrete |
|
|
| Reports/Concrete |
|
140 | Concrete/Create Drawings/Steel | Draws steel column anchorage. | |
|
| Steel/Create Drawings/Steel |
|
|
| Drawings/Create Drawings/Steel |
|
141 | Concrete/Create Drawings/Concrete | Prepares column application plan. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
142 | Analysis and Design/Design Parameters/Concrete | Opens column parameters. | |
143 | Concrete/Concrete/Column | Opens column settings. | |
144 | Concrete/Concrete | Draws column support. | |
145 | Modify/Transform/Beam to Shearwall | Converts columns to shearwalls. | |
146 | Concrete/Create Drawings/Concrete | Prepares column vertical drawings. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
147 | Concrete/Create Drawings/Concrete | Create column-beam joint cross-section. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
148 | Concrete/Reports/Concrete | Prepares column-beam joint safety report. | |
|
| Steel/Reports/Concrete |
|
|
| Reports/EQ Code |
|
149 | Connection/Experimentals | Creates a column-beam stiffened end plate connection. | |
150 | Connection/Experimentals/Column-Column End Plate Splice | Creates a built up column connection. | |
151 | Connection/Experimentals | Creates a column-column end plate splice connection. | |
152 | Connection/Connection | Creates a column-foundation connection (Stiffened baseplate). | |
153 | Concrete/Design/Concrete | Column/Shearwall punching dialog. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Concrete Design |
|
154 | Analysis and Design/Define | Adds a new combination. | |
155 | Tools/Quantity Report | Creates components report. | |
156 | Analysis and Design/Steel Design | Display composite beam design results. | |
|
| Concrete/Design/Steel |
|
|
| Steel/Design/Steel |
|
157 | Concrete/Reports/Steel | Creates composite beam design report. | |
|
| Steel/Reports/Steel |
|
|
| Reports/Steel |
|
158 | Analysis and Design/Steel Design | Display composite castellated beam design results. | |
|
| Concrete/Design/Steel |
|
|
| Steel/Design/Steel |
|
159 | Concrete/Reports/Steel | Creates composite castellated beam design report. | |
|
| Steel/Reports/Steel |
|
|
| Reports/Steel |
|
160 | Steel/Steel | Draws composite slab. | |
161 | Steel/Steel/Composite Slab | Draws composite solid slab. | |
162 | Concrete/Reports/Concrete | Prepares compound shearwall report. | |
|
| Steel/Reports/Concrete |
|
|
| Reports/Concrete |
|
163 | Concrete/Reports/Steel | Creates concentric braces report. | |
|
| Steel/Reports/Steel |
|
|
| Reports/Steel |
|
164 | Analysis and Design/Steel Design | Select concentrically braced frame members. | |
|
| Concrete/Design/Steel |
|
|
| Steel/Design/Steel |
|
165 | Structural Inspection/Output | Shows concrete design out all failures visualization dialog page. | |
166 | Structural Inspection/Output/Concrete All Failures | Shows concrete design out axial failure visualization dialog page. | |
167 | Structural Inspection/Output/Concrete All Failures | Shows concrete capacity ratio visualization dialog page. | |
168 | Structural Inspection/Output/Concrete All Failures | Shows concrete design out columnt-beam joint area failure visualization dialog page. | |
169 | Structural Inspection/Design/Concrete | Shows concrete design out critical shearwalls visualization dialog page. | |
170 | Structural Inspection/Output/Concrete All Failures | Shows concrete design out deflection failure visualization dialog page. | |
171 | Concrete/Reports/Concrete/Structure Summary | Prepares concrete Design Settings Report. | |
|
| Steel/Reports/Concrete/Structure Summary |
|
172 | Structural Inspection/Output/Concrete All Failures | Shows concrete design out insufficient rebar area visualization dialog page. | |
173 | Structural Inspection/Output/Concrete All Failures | Shows concrete design out insufficient rebar development length visualization dialog page. | |
174 | Structural Inspection/Design/Concrete | Shows concrete design out longitudinal rebar percentage (%-beam endpoints) visualization dialog page. | |
175 | Structural Inspection/Design/Concrete | Shows concrete design out longitudinal rebar percentage (%-beam spans) visualization dialog page. | |
176 | Structural Inspection/Design/Concrete | Shows concrete design out longitudinal rebar percentage (%-columns) visualization dialog page. | |
177 | Structural Inspection/Design/Concrete | Shows concrete design out longitudinal rebar percentage (%-shearwalls) visualization dialog page. | |
178 | Structural Inspection/Design/Performance | Shows concrete performance analysis (brittle elements) visualization dialog page. | |
179 | Structural Inspection/Output/Concrete All Failures | Shows concrete design out punching failure (foundation slabs) visualization dialog page. | |
180 | Structural Inspection/Output/Concrete All Failures | Shows concrete design out punching failure (story slabs) visualization dialog page. | |
181 | Structural Inspection/Output/Concrete All Failures | Shows concrete design out elements which have rebar percentage above the allowed limit visualization dialog page. | |
182 | Structural Inspection/Output/Concrete All Failures | Shows concrete design out section failures visualization dialog page. | |
183 | Structural Inspection/Output/Concrete All Failures | Shows concrete design out shear failures visualization dialog page. | |
184 | Steel/Steel/Composite Slab | Draws concrete slab over steel beams. | |
185 | Structural Inspection/Output/Concrete All Failures | Shows concrete design out torsional failure visualization dialog page. | |
186 | Structural Inspection/Output/Concrete All Failures | Shows concrete design out crack failure visualization dialog page. | |
187 | Reports/Formwork | Creates concrete formwork report. | |
188 | Right click menu. | The workplane dialog opens and editing is done. | |
189 | Concrete/Design | Display connection design results. | |
|
| Steel/Design |
|
|
| Analysis and Design/Steel Design |
|
190 | Concrete/Reports | Creates connection design summary report. | |
|
| Steel/Reports |
|
|
| Reports/Steel |
|
191 | Concrete/Design/Concrete | Displays the calculation results of the coupling beams and the selected reinforcements. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Concrete Design |
|
192 | Concrete/Create Drawings/Concrete | Prepares coupling beam drawings. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
193 | Concrete/Foundation/Coupling Beam | Opens coupling beam settings. | |
194 | Structural Inspection/Input/Steel | Shows steel design in electrode types visualization dialog page. | |
195 | Structural Inspection/Input/Steel | Shows steel design in connection plate materials visualization dialog page. | |
196 | ideCAD logo/Help | Opens the program's help document. | |
197 | Concrete/Concrete | Draws continuous arc beams. | |
198 | Concrete/Wall | Draws continuous arc walls. | |
199 | Connection/Experimentals | Creates a continuous beam connection. | |
200 | Concrete/Concrete/Slab Edge | Draws continuous slab edges. | |
201 | Concrete/Axis/Axis | Sets contours of the drawing. | |
|
| Steel/Axis/Axis |
|
202 | Drawings/Edit | Copies entities. | |
203 | Tools/Edit | Copies contours of a drawing. | |
204 | Tools/File Sharing | Copies entities to a .blk file. | |
205 | It is located in the column toolbar. | Sets corner aligned column. | |
206 | It is located in the single footing toolbar. | Sets corner aligned single footing. | |
207 | Concrete/Foundation | Draws coupling beam. | |
208 | Concrete/Reports/Concrete | Prepares coupling beam report. | |
|
| Steel/Reports/Concrete |
|
209 | Analysis and Design/Design Parameters/Concrete | Opens coupling beam parameters. | |
210 | Steel/Macro | Draws Crane. | |
211 | Concrete/Design/Steel | Display crane beam design results. | |
|
| Steel/Design/Steel | Display crane beam design results. |
|
| Analysis and Design/Steel Design | Display crane beam design results. |
212 | Connection/Experimentals | Creates a crane connection. | |
213 | Concrete/Reports/Steel | Creates crane design report. | |
|
| Steel/Reports/Steel | Creates crane design report. |
|
| Reports/Steel | Creates crane design report. |
214 | View/Workplane | Creates a clip plane. | |
215 | Right click menu in structure tree steel section part. | Creates a user defined section. | |
216 | Drawings/Layout Design | Creates a new layout window. | |
217 | Right Click Menu | Makes the selected objects a new group. | |
218 | Concrete/Concrete/Stair | Creates a new stair. | |
219 | It is located in the hatch toolbar. | Creates user defined hatch from block objects. | |
220 | Objects/Reinforcement | Draws a crosstie between two circles. | |
|
| Drawings/Reinforcement |
|
221 | Tools/Import-Export/Export | Exports columns and shearwall groups to CSICOL software. | |
|
| ideCAD logo/Export |
|
222 | Concrete/Concrete | Draws curve beam. | |
223 | Concrete/Concrete/Slab Edge | Draws curve slab edge. | |
224 | Modify/Transform/Beam to Shearwall | Converts circle, arc, ellipse objects to beams. | |
225 | Modify/Transform/Beam to Shearwall | Converts circle, arc, ellipse objects to shearwalls. | |
226 | Concrete/Wall | Draws curve wall. | |
227 | Right-click on any point of the vertical toolbar | Customize the vertical toolbar and the customizable toolbar on the top edge. | |
228 | It is located in the column toolbar. | Sets default aligned. | |
229 | It is located in the single footing toolbar. | Sets default single footing. | |
230 | Drawings/Snap | Defines temporary coordinate system origin. | |
231 | Modify/Entity Edit/Column | Defines seismic isolator. | |
|
| It is located in the column toolbar. |
|
|
| It is located in the shearwall toolbar. |
|
232 | Concrete/Concrete/Stair | Deforms stair. | |
|
| Modify/Entity Edit/Stair |
|
233 | Drawings/Edit | Delete entities. | |
234 | It is located in the mirror toolbar. | Delete old entities on mirror. | |
235 | It is located in the pool toolbar. | Delete primitives after pool creation. | |
236 | It is located in the roof details toolbar. | Deletes roof element(s). | |
237 | It is located in the slab for steels toolbar. | Deletes slab hole. | |
238 | It is located in the wall toolbar. | Changes delta value. | |
|
| It is located in the beam toolbar. |
|
|
| It is located in the shearwall toolbar. |
|
|
| It is located in the ODT door/window toolbar. |
|
|
| It is located in the strip footing toolbar. |
|
|
| It is located in the retaining wall toolbar. |
|
239 | Drawings/Edit | Deselects all entities. | |
240 | Tools/Quantity Report | Design components. | |
241 | Right click menu | Closes the layer of the opened object. | |
242 | View/Workplane | Display a vertical frame. | |
243 | Tools/Reference | Calculates distance. | |
|
| Drawings/Reference |
|
244 | It is located in the distribute toolbar. | Distribute by drawing a path. | |
245 | It is located in the distribute toolbar. | Distribute by selecting an edge of entity. | |
246 | Drawings/Modify | Distrubutes the selected entities. | |
247 | It is located in the distribute toolbar. | Distrubutes selected entities to the horizontally. | |
248 | It is located in the distribute toolbar. | Distribute selected entities to the object center. | |
249 | It is located in the distribute toolbar. | Distribute selected entities to the nearest point. | |
250 | It is located in the distribute toolbar. | Distrubute selected entities to the vertically. | |
251 | Drawings/Modify | Divides the objects to the desired number. | |
252 | Steel/Steel/Purlin | Divides and combines on all intersections. | |
253 | Steel/Steel/Purlin | Divides and combines on selected intersections. | |
254 | Objects/Roof | Draws dome. | |
255 | Concrete/Design/Concrete | Display the calculation results of the domes and the selected reinforcements. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Concrete Design |
|
256 | Concrete/Analysis/Analysis Design | Does dome/vault analysis. | |
|
| Steel/Analysis/Analysis Design |
|
|
| Analysis and Design/Analysis/Analysis Design |
|
|
| Structural Inspection/Analysis/Analysis Design |
|
257 | Concrete/Create Drawings/Concrete | Generates dome drawings. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
258 | Objects/Roof/Dome | Opens dome settings. | |
259 | Analysis and Design/Design Parameters/Concrete | Opens dome and vault parameters. | |
260 | Concrete/Reports/Concrete | Prepares dome/vault results report. | |
|
| Steel/Reports/Concrete |
|
261 | Connection/Connection | Creates a double angle connection. | |
262 | Connection/Experimantals | Creates a double plate seating connection. | |
263 | Steel/Macro/Truss | Draws Double Vault Truss. | |
264 | Tools/Tools | Enters drafting mode. | |
265 | Concrete/Foundation | Draws calculation lines on raft foundation of concrete design. | |
266 | Concrete/Concrete | Draws calculation lines on slabs of concrete design. | |
267 | View/View | Display the line thicknesses defined for primitive objects on the plan view. | |
268 | Concrete/Concrete/Stair | Draws new stair concrete calculation line. | |
269 | Right click menu | Draws similar entity of the selected one. | |
270 | Steel/Steel/Brace | Draws single steel brace. | |
271 | It is located in the slab for steels toolbar. | Draws slab hole. | |
272 | Steel/Steel/Brace | Draws steel brace with multiple steel elements. | |
273 | Connection/Mode | Draws connection in fast mode. | |
274 | View/Window | Display drawing list. | |
|
| Drawings/Window |
|
275 | View/Window | Arrange drawings in the project. | |
276 | Tools/Import-Export/Import | Imports DWG DXF file formats as structure elements. | |
|
| ideCAD logo/Import |
|
277 | Tools/Import-Export/Import | Imports DWG DXF file formats. | |
|
| ideCAD logo/Import |
|
278 | Tools/Import-Export/Export | Exports to DWG DXF DWF file formats. | |
|
| ideCAD logo/Export |
|
279 | Tools/Import-Export/Export | Exports to DWG DXF DWF file formats. | |
|
| ideCAD logo/Export |
|
280 | Concrete/Reports | Prepares dynamic analysis report. | |
|
| Steel/Reports |
|
|
| Reports/Dynamic Analysis |
|
281 | Concrete/Reports | Prepares EQ code general report. | |
|
| Steel/Reports |
|
|
| Reports/EQ Code |
|
282 | Connection/Experimentals/Haunch | Creates a eaves haunch connection. | |
283 | Concrete/Reports/Steel | Creates eccentric braces report. | |
|
| Steel/Reports/Steel |
|
|
| Reports/Steel |
|
284 | It is located in the single footing toolbar. | Sets edge aligned single footing. | |
285 | Concrete/Concrete | Edit concrete calculation line. | |
|
| Concrete/Foundation |
|
|
| Modify/Entity Edit/ Slab |
|
286 | Modify/Add Load | Edits loads. | |
287 | Modify/Entity Edit/Dimension | Edit label text. | |
288 | It is located in the slab for steels toolbar. | Edit slab edge. | |
289 | Modify/Entity Edit/Stair | Edit stair. | |
290 | Concrete/Concrete/Stair | Edit stair concrete calculation line. | |
291 | Modify/Entity Edit | Edit text. | |
|
| Drawings/Text |
|
292 | Structural Inspection/Input/Concrete | Shows concrete design in element lengths visualization dialog page. | |
293 | Structural Inspection/Input | Shows steel design in element lengths visualization dialog page. | |
294 | Structural Inspection/Input/Concrete | Shows concrete design in element materials visualization dialog page. | |
295 | Structural Inspection/Input | Shows concrete design in element sections visualization dialog page. | |
296 | Structural Inspection/Input/Steel | Shows steel design in element sections visualization dialog page. | |
297 | Structural Inspection/Steel | Shows steel design in Element Materials visualization dialog page. | |
298 | It is located in the section toolbar. | Draws elevation line for creating elevation. | |
299 | Objects/Terrain | Draws elevation line. | |
300 | Objects/Terrain | Draws elevation point. | |
301 | Drawings/Primitives | Draws ellipse using corner. | |
302 | Drawings/Primitives/Ellipse Corners | Draws ellipse using center and corner. | |
303 | Drawings/Primitives/Ellipse Corners | Draws ellipse using midpoint and axis. | |
304 | Drawings/Primitives/Ellipse Corners | Draws elliptical arc using center and corner. | |
305 | Drawings/Primitives/Ellipse Corners | Draws elliptical arc using corners. | |
306 | Drawings/Primitives/Ellipse Corners | Draws elliptical arc using midpoint and axis. | |
307 | Connection/Connection/Single Plate Connection | Creates an end plate shear connection. | |
308 | Connection/Experimentals/Seating Support Connection | Creates an end plate truss connection. | |
309 | Connection/Experimentals/Seating Support Connection | Creates an end plate truss connection for box/tube. | |
310 | Keyboard | Runs the command. It has functions in various command stages. | |
311 | Tools/Generate | Entity from primitives. | |
312 | Modify/Entity Properties | Changes entity properties. | |
313 | Keyboard | Exits the found command. | |
314 | Analysis and Design/Define/Load Case | Adds a new euler buckling case. | |
315 | ideCAD logo/Export | Export information such as story parameters, story displacements, internal forces etc. to Excel | |
316 | It is located in the single footing toolbar. | Exchange coordinates. | |
317 | Exit | ideCAD logo | Quits the application. |
318 | Expand All | Right click menu in structure tree. | Expands all structure tree items. |
319 | Drawings/Modify | Separates the blocks into sub-blocks. | |
320 | It is located in the steel beam toolbar. | Explodes and groups multi-element entities into single elements. | |
|
| It is located in the steel purlin toolbar. |
|
321 | Tools/Quantity Report/Export | Exports components as a database file To AMP. | |
322 | Tools/Quantity Report/Export | Exports components as a database file To OSKA. | |
323 | Tools/Quantity Report/Export | Exports static quantities as a database file To AMP. | |
324 | Tools/Quantity Report/Export | Exports static quantities as a database file To OSKA. | |
325 | Drawings/Modify | Line extends primitive objects such as arcs to another line or arc. | |
326 | Objects/Roof | Draws fascia boards. | |
327 | Drawings/Modify | Activates fast move. | |
328 | Settings/Settings | Edit/create fiber reinforced polymer materials. | |
329 | Drawings/Modify | It connects two lines with an arc. | |
330 | Tools/Tools | Finds entities based on their labels and change the labels. | |
331 | It is located in the hatch toolbar. | Finds hatch holes. | |
332 | Right click menu | Displays an element in plan view in perspective view. | |
333 | Right click menu | Displays an element in perspective view in plan view. | |
334 | Connection/Experimental/Stiffened Shear Plate Connection | Creates a flange plate connection. | |
335 | Steel/Macro/Truss | Draws Flat Truss. | |
336 | Right click menu in perspective view | Opens fly mode. | |
337 | Drawings/Text | Draws formatted text. | |
338 | Drawings/Create Drawings | Prepares concrete formwork plan. | |
339 | Concrete/Create Drawings/Concrete | Prepares formwork plan. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
340 | Concrete/Create Drawings/Concrete | Prapares foundation plan. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
341 | Drawings/Dimensions | Draws free dimension. | |
342 | Drawings/Dimensions/Free Dimension | Opens free dimension settings. | |
343 | Drawings/Primitives | Draws freehand curve. | |
344 | Concrete/Concrete/Slab | Creates a free mode slab by selecting boundary entities manually. | |
345 | Structural Inspection/Output/Concrete All Failures | Shows concrete design out friction shear failure visualization dialog page. | |
346 | View/Perspective | Changes view to front. | |
347 | Concrete/Analysis/Analysis Design | Determine ground motion records for mode superposition method. | |
|
| Steel/Analysis/Analysis Design |
|
|
| Analysis and Design/Analysis/Analysis Design |
|
348 | Analysis and Design/Design Parameters/Concrete | Opens general concrete reinforcement parameters. | |
349 | Concrete/Create Drawings/Steel | Draws steel general construction. | |
|
| Steel/Create Drawings/Steel |
|
|
| Drawings/Create Drawings/Steel |
|
350 | Concrete/Create Drawings/Steel | Draws steel general construction w/ single parts and assembly. | |
|
| Steel/Create Drawings/Steel |
|
|
| Drawings/Create Drawings/Steel |
|
351 | Tools/Generate | Generates a 2D simple drawing using current drawing. | |
352 | Concrete/Analysis/Analysis Design | Generates Analysis System. | |
|
| Steel/Analysis/Analysis Design |
|
|
| Analysis and Design/Analysis/Analysis Design |
|
353 | Tools/Generate | Generates vector drawing. | |
354 | Reports/Foundation | Predesign Results for Geotechnic Report. | |
355 | It is located in the terrain toolbar. | Get elevation from terrain. | |
356 | Modify/Modify | Picks settings from entity. | |
357 | Tools/Selection Groups | Gets currently selected entities. | |
358 | Connection/Experimentals/Purlin Connection | Creates a girt connection. | |
359 | Concrete/Analysis/Analysis Design | Ground Motion Scaling in Time Domain. | |
|
| Steel/Analysis/Analysis Design |
|
|
| Analysis and Design/Analysis/Analysis Design |
|
360 | Tools/Selection Groups | Groups selected entities and selects entities based on these groups. | |
361 | Steel/Macro | Creates hall. | |
362 | Steel/Macro | Creates steel hand rail. | |
363 | Drawings/Hatch | Draws hatch hole. | |
364 | Drawings/Hatch/User Defined Hatch | Opens hatch settings. | |
365 | Connection/Experimentals | Creates a haunch connection. | |
366 | View/View/Solid with Edges | Changes view detail to hidden line. | |
367 | View/View | Changes view detail to hidden line black && white. | |
368 | Right click menu | Removes all selected entities in the 3D view. | |
369 | Objects/Roof | Draws hip/valley rafters. | |
370 | Objects/Terrain | Draws hole. | |
371 | Keyboard | Centers the image in fly mode. | |
372 | View/Workplane/Target Workplane | Creates a horizontal workplane. | |
373 | Tools/Import-Export/Import | Imports IFC file. Merges file content with current project. | |
|
| ideCAD logo/Import |
|
374 | Tools/Import-Export/Export | Exports project to IFC. | |
|
| ideCAD logo/Export |
|
375 | Drawings/Text | Imports text from a text file. | |
376 | Right click menu/Drawing order | Sends the selected object to the background. | |
377 | Right click menu/Drawing order | Sends the selected object to the foreground. | |
378 | Right click menu/Drawing order | Sends the selected object behind a certain object. | |
379 | Right click menu/Drawing order | Sends the selected object in front of a certain object. | |
380 | Modify/Entity Edit | Makes the selected objects beveled according to the given slope values. | |
381 | Drawings/Dimensions | Draws inner dimension. | |
382 | Drawings/Dimensions/Free Dimension | Opens inner dimension settings. | |
383 | Drawings/Layout Design/Create New Layout | Inserts a layout block. | |
384 | Concrete/Concrete/Stair | Changes insertion point. | |
|
| It is located in the ODT door/window toolbar. |
|
|
| It is located in the stair toolbar. |
|
|
| It is located in the library toolbar. |
|
385 | Drawings/Dimensions | Draws intersection dimension. | |
386 | Drawings/Edit | Inverts current selection. | |
387 | ideCAD Home | ideCAD logo | Opens the start page. |
388 | Drawings/Modify | Joins linear objects. | |
389 | Connection/Connection | Creates a beam-beam connection (Joining plates). | |
390 | Coordinate Box | L enters the coordinate box. Object length is entered. | |
391 | Drawings/Dimensions | Draws label. | |
392 | Modify/Entity Edit | Label entities. | |
393 | Drawings/Edit | Selects last selected entities. | |
394 | Objects/Roof | Draws laths. | |
395 | Settings/Settings | Opens layer settings. | |
396 | Right click menu on the plan view. | Opens layer settings. | |
397 | Drawings/Layout Design/Create New Layout | Changes settings of current layout. | |
398 | View/Perspective | Changes view to left. | |
399 | It is located in the column toolbar. | Sets edge left middle aligned. | |
400 | Drawings/Dimensions | Draws level dimension. | |
401 | Drawings/Dimensions/Level Dimension | Opens level dimension settings. | |
402 | Objects/Entities | Draws library. | |
|
| Drawings/Primitives |
|
403 | Drawings/Primitives/Library | Opens library settings. | |
404 | Concrete/Concrete/Slab | Draws line slab band. | |
405 | Concrete/Analysis/Analysis Design | Performs a linear performance analysis of the building. | |
|
| Steel/Analysis/Analysis Design |
|
|
| Structural Inspection/Analysis/Analysis Design |
|
|
| Analysis and Design/Analysis/Analysis Design |
|
406 | Concrete/Foundation/Raft | Draws linear raft foundation load. | |
407 | Concrete/Concrete | Draws linear slab load. | |
408 | Concrete/Structural Inspection/Wall | Shows live loads visualization dialog page. | |
|
| Steel/Structural Inspection/Wall |
|
|
| Structural Inspection/Loads/Wall |
|
409 | Settings/Settings | Edit/create loads. | |
410 | Right click menu in structure tree steel section. | Loads a predefined section from the section library. | |
411 | Settings/Settings | Loads settings from a file. | |
412 | Tools/Edit | Local undo, undo for current mode only. | |
413 | Modify/Layers | Locks/Unlocks layers. | |
414 | Drawings/Modify | Blocks entities. | |
415 | Tools/Edit | Make architectural file compatible with structural. | |
416 | Settings/Settings | Edit/create materials. | |
417 | Analysis and Design/Reinfrocement/Steel Bar Selection | Opens mesh wire settings. | |
418 | Steel/Steel/Composite Slab | Draws metal slab. | |
419 | Drawings/Snap | Snaps to midpoints of entities. | |
420 | Drawings/Modify | Takes symmetry. | |
421 | It is located in the ODT door/window toolbar. | Mirrors door/window labels. | |
422 | It is located in the strip footing toolbar. | Takes symmetry with respect to the X-axis. | |
|
| It is located in the ODT door/window toolbar. |
|
|
| It is located in the column toolbar. |
|
|
| It is located in the retaining wall toolbar. |
|
423 | Concrete/Concrete/Stair | Takes symmetry with respect to the Y-axis. | |
|
| It is located in the ODT door/window toolbar. |
|
424 | Concrete/Structural Inspection | Shows deformation modal visualization dialog page. | |
|
| Steel/Structural Inspection | Shows deformation modal visualization dialog page. |
|
| Structural Inspection/Deformation | Shows deformation modal visualization dialog page. |
425 | Analysis and Design/Define/Load Case | Adds a new modal analysis case. | |
426 | It is located in the trusses toolbar. | Allow modify sub elements of truss. | |
427 | Structural Inspection/Input/Concrete | Shows concrete design in modulus of subgrade reaction visualization dialog page. | |
428 | Concrete/Structural Inspection | Shows frame moment 3-3 visualization dialog page. | |
|
| Steel/Structural Inspection |
|
|
| Structural Inspection/Frame Results |
|
429 | Structural Inspection/Purlin | Shows purlin moment 3-3 visualization dialog page. | |
430 | Analysis and Design/Steel Design | Select moment resisting frame members. | |
431 | Concrete/Design/Steel | Select moment resisting frame members. | |
|
| Steel/Design/Steel |
|
432 | Drawings/Modify | Move. | |
433 | Concrete/Axis/Axis | Moves axis label. | |
|
| Steel/Axis/Axis |
|
|
| Modify/Entity Edit |
|
434 | Modify/Entity Edit/Dimension | Moves dimension texts. | |
435 | It is located in the Raft Foundation toolbar. | Moves raft foundation text. | |
436 | Modify/Entity Edit/Slab | Moves slab text. | |
437 | Concrete/Concrete/Stair | Moves stair text. | |
|
| Modify/Entity Edit/Stair |
|
438 | Connection/Experimentals | Creates multi stiffener plates. | |
439 | Connection/Experimentals/Multi Stiffener Plate | Creates horizontal multi stiffener plates. | |
440 | Drawings/Primitives | Draws multiple lines. | |
441 | Drawings/Snap | Snaps to nearest points of entities. | |
442 | ideCAD logo | Creates a new, empty 2D drawing window. | |
443 | ideCAD logo | Creates a new project. | |
444 | Drawings/Layout Design/Create New Layout | Creates a new layout block using all drawing. | |
445 | Drawings/Layout Design/Create New Layout | Creates a new layout block | |
446 | Drawings/Layout Design/Create New Layout | Creates a new layout block | |
447 | Drawings/Layout Design/Create New Layout | Creates a new layout block | |
448 | Drawings/Layout Design/Create New Layout | Creates a new layout block | |
449 | Analysis and Design/Building | Adds a new material. | |
450 | View/Window | Activates next window. | |
451 | Analysis and Design/Steel Design | Display noncomposite castellated beam design results. | |
|
| Concrete/Design/Steel |
|
|
| Steel/Design/Steel |
|
452 | Analysis and Design/Define/Load Case | Adds a new nonlinear analysis case. | |
453 | Connection/Ecperimentals/Continuous Beam Connection | Creates a notched seating connection. | |
454 | Drawings/Primitives | Draws NURBS curve. | |
455 | Drawings/Modify | Offset. | |
456 | It is located in the section toolbar. | Finishes the current job. | |
457 | ideCAD logo | Opens a previously saved project. | |
458 | Drawings/Snap | Enters orthogonal drawing mode. | |
459 | Drawings/Dimensions | Draws outer dimension. | |
460 | Drawings/Dimensions/Free Dimension | Opens outer dimension settings. | |
461 | Structural Inspection/Input/Concrete | Shows concrete design in overridden elements visualization dialog page. | |
462 | Structural Inspection/Input/Steel | Shows steel design in overridden elements visualization dialog page. | |
463 | Concrete/Structural Inspection/Wall | Shows own loads visualization dialog page. | |
|
| Steel/Structural Inspection/Wall |
|
|
| Structural Inspection/Loads/Wall |
|
464 | Keyboard | Scrolls down the page in reports. Also shifts the viewpoint down in fly mode in the perspective view. | |
465 | Keyboard | Scrolls the page up in reports. Also shifts the viewpoint upwards in flight mode in the perspective view. | |
466 | View/Zoom | Pans the window. | |
467 | Modify/Add Load | Adds shearwall water pressurized soil load. | |
468 | Modify/Add Load | Adds shearwall lateral load. | |
469 | Modify/Add Load | Adds shearwall soil load. | |
470 | Modify/Add Load | Adds shearwall vertical load. | |
471 | Drawings/Snap | Parallel reference. | |
472 | Drawings/Hatch | Draws parametric hatch. | |
473 | Drawings/Edit | Paste entities. | |
474 | Tools/Edit | Pastes contours. | |
475 | Tools/File Sharing | Pastes entities from a .blk file. | |
476 | Drawings/Primitives | Draws path primitives. | |
477 | Drawings/Primitives | Draws pattern path. | |
478 | Tools/Import/Export/Export | Exports To PDF. | |
|
| ideCAD logo/Export |
|
479 | Settings/Settings | Opens pen and color settings. | |
480 | Drawings/Tools | Performs steel numbering. | |
481 | Structural Inspection/Design/Performance | Shows performance analysis results visualization dialog page. | |
482 | Drawings/Snap | Perpendicular reference. | |
483 | View/Perspective | Changes view to perspective. | |
484 | Concrete/Foundation | Draws piles. | |
485 | Concrete/Design | Display the calculation results of the pile and the selected reinforcements. | |
|
| Steel/Design |
|
|
| Analysis and Design/Concrete Design |
|
486 | Concrete/Reports | Prepares pile general report. | |
|
| Steel/Reports |
|
487 | Concrete/Create Drawings/Concrete | Generates pile drawings. | |
|
| Steel//Create Drawings/Concrete |
|
|
| Drawings//Create Drawings/Concrete |
|
489 | Analysis and Design/Design Parameters/Concrete | Opens pile parameters. | |
490 | Concrete/Foundation/Pile | Opens pile settings. | |
491 | Tools/Import-Export/Export | Saves the screen image as a bitmap file. | |
|
| ideCAD logo/Export |
|
492 | Objects/Terrain | Draws plateau. | |
493 | ideCAD logo | Plots your drawings. | |
494 | Modify/Add Load | Adds point load. | |
495 | Concrete/Foundation/Raft | Draws point raft foundation load. | |
496 | Concrete/Concrete | Draws point slab load. | |
497 | Drawings/Edit | Creates copies of objects with rotation. | |
498 | Modify/Transform/Beam to Shearwall | Transforms primitive entities to plate section. | |
499 | Concrete/Concrete | Draws polygon column. | |
500 | Steel/Steel/Sheeting | Draws sheeting polygon. | |
501 | Objects/Entities | Draws pool. | |
502 | Concrete/Analysis/Analysis Design | Performs pool analysis. | |
|
| Steel/Analysis/Analysis Design |
|
|
| Analysis and Design/Analysis/Analysis Design |
|
|
| Structural Inspection/Analysis/Analysis Design |
|
503 | Structural Inspection/Shell Elements/Shell Results | Shows pool results visualization dialog page. | |
504 | Objects/Entities | Opens pool settings. | |
505 | Objects/Roof | Draws a post. | |
506 | Settings/Settings | Opens preferences. | |
507 | View/Window | Activates previous window. | |
508 | Settings/Project Settings | Opens project settings. | |
509 | Objects/Roof | Draws purlins. | |
510 | Steel/Steel | Draws steel purlin. | |
511 | Concrete/Design | Display steel purlin design results. | |
|
| Steel/Design |
|
|
| Analysis and Design/Steel Design |
|
512 | Connection/Experimentals | Creates a purlin connection. | |
513 | Reports/Nonlinear | Creates pushover report | |
514 | Concrete/Analysis/Analysis Design | Performs pushover analysis. | |
|
| Steel/Analysis/Analysis Design |
|
|
| Analysis and Design/Analysis/Analysis Design |
|
|
| Structural Inspection/Analysis/Analysis Design |
|
515 | Connection/Experimentals/Multi Stiffener Plate | Creates stiffener plates.. | |
516 | Concrete/Reports/Concrete | Prepares quantity report. | |
|
| Steel/Reports/Concrete |
|
|
| Reports/Quantity |
|
517 | Drawings/Dimensions | Draws radius dimension. | |
518 | Drawings/Dimensions/Level Dimension | Opens radius dimension settings. | |
519 | Concrete/Foundation | Draws raft foundation. | |
520 | Concrete/Foundation | Draws raft edge. | |
521 | Concrete/Foundation/Raft Edge | Opens raft edge settings. | |
522 | Concrete/Design | Display the calculation results of the raft foundation and the selected reinforcements. | |
|
| Steel/Design |
|
|
| Analysis and Design/Concrete Design |
|
523 | Concrete/Reports | Prepares raft foundation general report. | |
|
| Steel/Reports |
|
|
| Reports/Foundation |
|
524 | Concrete/Reports/Concrete/Raft Foundation | Prepares raft foundation detailed general report. | |
|
| Steel/Reports/Concrete/Raft Foundation |
|
|
| Reports/Foundation/Raft Foundation |
|
525 | Concrete/Foundation/Raft | Draws raft foundation hole. | |
526 | Analysis and Design/Design Parameters/Concrete | Opens raft foundation parameters. | |
527 | Structural Inspection/Shell Elements/Shell Results | Shows raft foundation results visualization dialog page. | |
528 | Concrete/Foundation/Raft | Opens raft foundation settings. | |
529 | Objects/Roof | Draws rafters. | |
530 | Drawings/Primitives | Places a raster image file onto the drawing. | |
531 | Drawings/Tools | Sets rebar numbering options. | |
532 | Drawings/Primitives/Multiple Lines | Draws a rectangle. | |
533 | It is located in the primitives toolbar. | Draws a rectangle. | |
534 | Modify/Transform/Beam to Shearwall | Converts rectangular columns to circular columns. | |
535 | It is located in the wall toolbar. | Draws 4 walls as a rectangle. | |
536 | Tools/Edit | Redo. | |
537 | Concrete/Concrete/Shearwalls | Draws reinforcement shearwall. | |
538 | Concrete/Concrete/Slab | Removes concrete calculation line. | |
|
| Concrete/Foundation/Raft |
|
|
| Modify/Entity Edit/Slab |
|
539 | Right Click Menu | Removes objects from previously created groups. | |
540 | It is located in the space truss toolbar. | Removes a nodule from space truss. | |
541 | It is located in the hatch toolbar. | Removes an existing point on hatch. | |
542 | Concrete/Concrete/Stair | Removes stair concrete calculation line. | |
543 | Right click menu in structure tree steel section. | Removes unused steel sections. | |
544 | Tools/Render | Renders active view. | |
|
| View/View |
|
545 | Right click menu | Repeats last command. | |
546 | Modify/Entity Edit/Dimension | Resets dimension text displacements. | |
547 | Modify/Entity Edit/Column | Resets column jacket edge thickness. | |
548 | Settings/Settings | Resets settings. | |
549 | Analysis and Design/Define/Load Case | Adds a new response spectrum case. | |
550 | Analysis and Design/Define/Load Case | Adds a new response spectrum function. | |
551 | Concrete/Foundation | Draws retaining walls. | |
552 | Concrete/Design/Concrete | Display the calculation results of the retaining wall and the selected reinforcements. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Concrete Design |
|
553 | Concrete/Reports/Concrete | Prepares retaining wall report. | |
|
| Steel/Reports/Concrete |
|
|
| Reports/Foundation |
|
554 | Concrete/Analysis/Analysis Design | Performs retaining wall analysis. | |
|
| Steel/Analysis/Analysis Design |
|
|
| Analysis and Design/Analysis/Analysis Design |
|
|
| Structural Inspection/Analysis/Analysis Design |
|
555 | Concrete/Create Drawings/Concrete | Prepares retaining wall drawings. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
556 | Analysis and Design/Design Parameters/Concrete | Opens retaining wall concrete settings. | |
557 | Drawings/Primitives | Draws revision cloud. | |
558 | Concrete/Create Drawings/Concrete | Rib drawings. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
559 | Concrete/Reports/Concrete/Slab | Prepares ribbed slab general report. | |
|
| Steel/Reports/Concrete/Slab |
|
|
| Reports/Slab/Slab |
|
560 | Analysis and Design/Design Parameters/Concrete | Opens ribbed-Waffle slab parameters. | |
561 | Concrete/Design/Concrete | Display the calculation results of the ribbed slab and the selected reinforcements. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Concrete Design |
|
562 | View/Perspective | Changes view to right. | |
563 | Connection/Experimental/Simple Base Plate | Creates a rigid on both axis base plate connection. | |
564 | Connection/Experimental/Simple Base Plate | Creates a rigid on strong axis base plate connection. | |
565 | Structural Inspection/Input/Concrete | Shows concrete design in rigidity reduction visualization dialog page. | |
566 | Objects/Roof | Draws roof. | |
567 | It is located in the roof toolbar. | Opens the roof details toolbar. | |
568 | Objects/Roof | Draws roof hole. | |
569 | Concrete/Creating Drawings/Steel | Draws steel roof plan. | |
|
| Steel/Creating Drawings/Steel |
|
|
| Drawings/Creating Drawings/Steel |
|
570 | Objects/Roof | Draws roof plane. | |
571 | It is located in the ODT door/window toolbar. | Draws roof window. | |
|
| It is located in the roof toolbar. |
|
572 | Drawings/Modify | Rotate. | |
573 | Tools/Tools | Rotates the building. | |
574 | Drawings/Modify | Rotates node. | |
575 | Connection/Experimental/Simple Base Plate | Creates a round plate tube base plate connection. | |
576 | Tools/Import-Export/Export | Exports a SAP2000 database file. | |
|
| ideCAD logo/Export |
|
577 | Steel/Steel/Sagrod | Draws top sag rod connection between 2 roof purlins. | |
578 | Steel/Steel/Sagrod | Draws sag rod on single purlins. | |
579 | Steel/Steel | Draws sag rod on purlin group. | |
580 | ideCAD logo | Saves current project. | |
581 | ideCAD logo | Save current project with a new name. | |
582 | ideCAD logo | Saves compresed project file. | |
583 | ideCAD logo | Saves old version project file. | |
584 | Settings/Settings | Saves settings to a file. | |
585 | Concrete/Concrete/Stair | Saves stair. | |
|
| Modify/Entity Edit/Stair |
|
586 | Concrete/Creating Drawings/Steel | Creates scaffolding drawings. | |
|
| Steel/Creating Drawings/Steel |
|
|
| Drawings/Creating Drawings/Steel |
|
587 | Concrete/Scaffolding | Creates scaffolding. | |
588 | Drawings/Modify/Scale by Reference | Scales entities. | |
589 | Drawings/Modify | Scales entities by reference. | |
590 | Connection/Experimentals | Creates a seating support connection. | |
591 | Connection/Experimentals/Seating Support Connection | Creates a seating truss connection. | |
592 | Connection/Experimental/Welded Connection | Creates a seating weld connection. | |
593 | Steel/Steel | Draws secondary beam. | |
594 | Concrete/Design/Steel | Display secondary beam design results. | |
|
| Steel/Design/Steel |
|
|
| Analysis and Design/Steel Design |
|
595 | Modify/Entity Edit/Stair | Secondary stair deformation. | |
596 | Analysis and Design/Define | Opens the section library dialog. | |
597 | Objects/Section | Edit and generate sections and elevations. | |
|
| Tools/Generate |
|
598 | Drawings/Dimensions | Draws section elevation. | |
599 | Drawings/Dimensions/Section Elevation | Opens section elevation settings. | |
600 | Objects/Section | Draws section line. | |
|
| Drawings/Tools |
|
601 | Settings/Settings | Opens the seismic isolators settings. | |
602 | Concrete/Reports/Concrete | Prepares seismic isolators reports. | |
|
| Steel/Reports/Concrete |
|
|
| Reports/Dynamic Analysis |
|
603 | Drawings/Edit | Selects all entitites. | |
604 | Steel/Steel/Purlin | Select purlins to add analysis. | |
605 | Drawings/Edit | Selects entity in all stories. | |
606 | Right click menu in structure tree materails part. | Selects objects in which the material is used. | |
607 | Right click menu in structure tree section part. | Selects objects in which the sections is used. | |
608 | Right click menu in perspective view | Selects the created object group. | |
609 | Concrete/Create Drawings/Steel | Select connections to add point details. | |
|
| Steel/Create Drawings/Steel |
|
|
| Drawings/Create Drawings/Steel |
|
610 | Concrete/Reports | Report selection. | |
|
| Steel/Reports |
|
|
| Reports/Summary |
|
611 | Right click menu in perspective view | Selects elements with similar properties | |
612 | It is located in the terrain toolbar. | Selects terrain and child entities. | |
613 | Concrete/Project Settings | Use semi rigid diaphragms. | |
|
| Steel/Project Settings |
|
|
| Analysis and Design/Building |
|
614 | It is located in the library toolbar. | Set auto elevation. | |
615 | Modify/Entity Edit/Beam-Footing | Sets cantiever beams and footings. | |
616 | It is located in the dome toolbar. | Sets dome restraints. | |
617 | Modify/Entity Edit/Beam-Footing | Sets beam | |
618 | Modify/Entity Properties | Sets default settings to selected entities. | |
|
| Drawings/Modify |
|
619 | Modify/Entity Edit | Sets hatch reference point. | |
620 | Drawings/Snap | Sets new local coordinate system. | |
621 | Modify/Entity Edit/Pool | Set pool cantilever slab properties. | |
622 | Modify/Entity Edit/Pool | Set pool surface properties. | |
623 | Modify/Entity Edit/Pool | Set pool surface slope. | |
624 | Modify/Entity Edit/Pool | Set pool wall properties. | |
625 | Tools/Selection Groups | Sets currently selected entities. | |
626 | Modify/Entity Edit/Column | Sets short columns. | |
627 | Concrete/Concrete/Stair | Sets boundary conditions of stairs. | |
|
| Modify/Entity Edit/Stair |
|
628 | It is located in the steel column toolbar. | Sets steel element delta. | |
|
| It is located in the steel beam toolbar. |
|
629 | Modify/Entity Edit | Sets entity trim algorithm. | |
630 | Concrete/Concrete | Sets typical ribs of ribbed-waffle slabs. | |
|
| Modify/Entity Edit/Slab |
|
631 | It is located in the vault toolbar. | Sets vault restraints. | |
632 | Concrete/Structural Inspection/Moment 3-3 | Shows frame shear 2-2 visualization dialog page. | |
|
| Steel/Structural Inspection/Moment 3-3 |
|
|
| Structural Inspection/Frame Results |
|
633 | Concrete/Concrete | Draws shearwall. | |
634 | Concrete/Design/Concrete | Display the calculation results of the shearwall and the selected reinforcements. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Concrete Design |
|
635 | Concrete/Reports/Concrete | Prepares shearwall general report. | |
|
| Steel/Reports/Concrete |
|
|
| Reports/Concrete |
|
636 | Analysis and Design/Concrete Design | Display the calculation results of the core shearwall and the selected reinforcements. | |
|
| Concrete/Design/Concrete | Display the calculation results of the core shearwall and the selected reinforcements. |
|
| Steel/Design/Concrete |
|
637 | Concrete/Create Drawings/Concrete | Prepares shearwall drawings. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
638 | Structural Inspection/Shearwall/Axial Force | Shows shearwall moment 2-2 visualization dialog page. | |
639 | Structural Inspection/Shearwall/Axial Force | Shows shearwall moment 3-3 visualization dialog page. | |
640 | Analysis and Design/Design Parameters/Concrete | Opens shearwall parameters. | |
641 | Structural Inspection/Shearwall/Axial Force | Shows shearwall shear 2-2 visualization dialog page. | |
642 | Structural Inspection/Shearwall/Axial Force | Shows shearwall shear 3-3 visualization dialog page. | |
643 | Structural Inspection/Input/Concrete | Shows concrete design in shearwall thickness visualization dialog page. | |
644 | Modify/Transform/Beam to Shearwall | Converts shearwalls to beams. | |
645 | Modify/Transform/Beam to Shearwall | Converts shearwalls to columns. | |
646 | Concrete/Concrete/Shearwall | Opens shearwall settings. | |
647 | Steel/Steel | Draws sheeting over purlins. | |
648 | Steel/Steel/Sheeting | Draws sheeting between two elements. | |
649 | Structural Inspection/Input | Shows steel design in sheeting own loads visualization dialog page. | |
650 | Structural Inspection/Input | Shows steel design in sheeting snow loads visualization dialog page. | |
651 | Structural Inspection/Shell Elements/Shell Results | Shows shell dome/vault visualization dialog page. | |
652 | Structural Inspection/Shell Elements | Shows shell solved with structure visualization dialog page. | |
653 | Structural Inspection/Shell Elements/Shell Results | Shows shell slab visualization dialog page. | |
654 | Structural Inspection/Shell Elements/Shell Results | Shows shell stair visualization dialog page. | |
655 | View/Windows | Show coordinate box. | |
656 | Right click menu in perspective. | Shows rendering limits before rendering. | |
657 | View/Windows | Show structure tree. | |
658 | View/Windows | Show toolbars. | |
659 | Modify/Entity Edit/Dimension | Shows/hides dimension text. | |
660 | Modify/Layers | Show/hide entity layers. | |
661 | View/View | Shows/hides nodes | |
662 | Concrete/Concrete/Stair | Shows/hides railings. | |
|
| Modify/Entity Edit/Stair |
|
663 | Connection/Esperimentals | Creates a simple base plate connection. | |
664 | Connection/Connection/Single Plate Connection | Creates a single angle connection. | |
665 | Concrete/Concrete | Draws single footing. | |
666 | Concrete/Design/Concrete | Display the calculation results of the single footing and the selected reinforcements. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Concrete Design |
|
667 | Concrete/Reports/Concrete | Prepares single footing report. | |
|
| Steel/Reports/Concrete |
|
668 | Concrete/Create Drawings/Concrete | Prepares single footing drawings. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
669 | Analysis and Design/Design Parameters/Concrete | Opens single footing parameters. | |
670 | Reports/Concrete | Prepares single footing report. | |
671 | Concrete/Foundation/Single Footing | Opens single footing settings. | |
672 | Concrete/Create Drawings/Steel | Draws steel single part. | |
|
| Steel/Create Drawings/Steel |
|
|
| Drawings/Create Drawings/Steel |
|
673 | Connection/Connection | Creates a single plate connection. | |
674 | Connection/Experimentals/Welded Connection | Creates a single plate seating connection. | |
675 | Steel/Steel/Purlin | Draws single steel purlin. | |
676 | Steel/Steel/Secondary Beam | Draws single secondary beam. | |
677 | Concrete/Reports/Steel | Creates single-part and assembly reports. | |
|
| Steel/Reports/Steel |
|
|
| Reports/Steel |
|
678 | Concrete/Concrere | Draws slab. | |
679 | Concrete/Design/Concrere | Display the calculation results of the slab and the selected reinforcements. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Concrete Design |
|
680 | Concrete/Reports/Concrete | Prepares slab general report. | |
|
| Steel/Reports/Concrete |
|
|
| Reports/Slab |
|
681 | Concrete/Analysis/Analysis Design | Does slab analysis. | |
|
| Steel/Analysis/Analysis Design |
|
|
| Analysis and Design/Analysis/Analysis Design |
|
|
| Structural Inspection/Analysis/Analysis Design |
|
682 | Structural Inspection/Input/Concrete | Shows concrete design in slab coating visualization dialog page. | |
683 | Structural Inspection/Input/Steel | Shows steel design in slab coating visualization dialog page. | |
684 | Structural Inspection/Input | Shows steel design in slab total dead loads visualization dialog page. | |
685 | Concrete/Reports/Concrete/Slab | Prepares slab detailed general report. | |
|
| Steel/Reports/Concrete/Slab |
|
|
| Reports/Slab/Slab |
|
686 | Concrete/Concrete | Draws slab edge. | |
687 | It is located in the slab for steels toolbar. | Draws slab edge. | |
688 | Concrete/Concrete/Slab Edge | Opens slab edge settings. | |
689 | Concrete/Concrete | Draws slab hole. | |
690 | Structural Inspection/Input | Shows concrete design in slab live loads visualization dialog page. | |
691 | Structural Inspection/Input | Shows steel design in slab live loads visualization dialog page. | |
692 | Concrete/Structural Inspection/Wall | Shows slab loads acting on elements (G) visualization dialog page. | |
|
| Steel/Structural Inspection/Wall |
|
|
| Structural Inspection/Loads/Wall |
|
693 | Concrete/Structural Inspection/Wall | Shows slab loads acting on elements (Q) visualization dialog page. | |
|
| Steel/Structural Inspection/Wall |
|
|
| Structural Inspection/Loads/Wall |
|
694 | Analysis and Design/Design Parameters/Concrete | Opens slab parameters. | |
695 | Concrete/Concrete/Slab | Opens slab settings. | |
696 | Concrete/Design/Concrete | Display the calculation results of the slabs with mesh wire and the selected reinforcements. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Design/Concrete |
|
697 | Structural Inspection//Input/Steel | Shows steel design in slab coating visualization dialog page. | |
698 | Structural Inspection/Input | Shows concrete design in slab thickness visualization dialog page. | |
699 | Structural Inspection/Input/Steel | Shows steel design in slab thickness visualization dialog page. | |
700 | Structural Inspection/Input | Shows concrete design in slab total death load visualization dialog page. | |
701 | Steel/Macro/Truss | Draws Sloping Flat Truss. | |
702 | Steel/Macro/Truss | Draws Sloping Vault Truss. | |
703 | Drawings/Snap | Snap to grid. | |
704 | Drawings/Snap | Snap to nodes. | |
705 | Concrete/Structural Inspection/Wall | Shows snow loads visualization dialog page. | |
|
| Steel/Structural Inspection/Wall |
|
|
| Structural Inspection/Loads/Wall |
|
706 | Settings/Settings | Edit / create soil layers. | |
707 | Structural Inspection/Loads/Wall | Shows soil loads visualization dialog page. | |
708 | Concrete/Structural Inspection | Changes view detail to solid with edges. | |
|
| Steel/Structural Inspection |
|
|
| View/View/Solid with Edges |
|
|
| Structural Inspection/View |
|
709 | View/View | Changes view detail to solid with edges. | |
710 | Keyboard | Moves the cursor to horizontal, vertical, and free axis drawing positions on axes. Changes the offset in commands such as wall, column, beam, shearwall. Skips a name in object labeling. Changes the insertion point in commands such as stair, library. | |
711 | Steel/Steel/Purlin | Draws space purlin. | |
712 | Concrete/Design/Steel | Display space purlin design results. | |
|
| Steel/Design/Steel |
|
|
| Analysis and Design/Steel Design |
|
713 | Concrete/Reports/Steel | Creates space purlin report. | |
|
| Steel/Reports/Steel |
|
|
| Reports/Steel |
|
714 | Concrete/Design/Steel | Display space truss design results. | |
|
| Steel/Design/Steel |
|
|
| Analysis and Design/Steel Design |
|
715 | Concrete/Reports/Steel | Creates space truss report. | |
|
| Steel/Reports/Steel |
|
|
| Reports/Steel |
|
716 | Connection/Experimentals/Multi Stiffener Plate | Creates a spacer plate connection. | |
717 | Connection/Connection/Joining Plates Connection | Creates a splice connection. | |
718 | Concrete/Concrete | Draws stair. | |
719 | Steel/Macro | Creates steel stair. | |
720 | Concrete/Design/Concrete | Display the calculation results of the stair and the selected reinforcements. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Concrete Design |
|
721 | Concrete/Analysis/Analysis Design | Does stair analysis. | |
|
| Steel/Analysis/Analysis Design |
|
|
| Analysis and Design/Analysis/Analysis Design |
|
|
| Structural Inspection/Analysis/Analysis Design |
|
722 | Concrete/Create Drawings/Concrete | Generates stair drawings. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
723 | Concrete/Reports/Concrete | Prepares stair general report. | |
|
| Steel/Reports/Concrete |
|
|
| Reports/Concrete |
|
724 | Analysis and Design/Design Parameters/Concrete | Opens stair parameters. | |
725 | Concrete/Concrete/Stair | Opens stair settings. | |
726 | Analysis and Design/Define/Load Case | Adds a new load case. | |
727 | Connection/Experimentals/Stiffened Shear Plate Connection | Creates a stay connection. | |
728 | Connection/Experimentals/Stiffened Shear Plate Connection | Craetes a stay connection (secondary beam). | |
729 | Concrete/Create Drawings/Steel | Draws steel general construction w/ single parts and assembly. | |
|
| Steel/Create Drawings/Steel |
|
|
| Drawings/Create Drawings/Steel |
|
730 | Structural Inspection/Output | Shows steel design out all failures visualization dialog page. | |
731 | Structural Inspection/Design/Steel | Shows steel design axial ratios visualization dialog page. | |
732 | Structural Inspection/Output/Steel All Failures | Shows steel design out axial failure visualization dialog page. | |
733 | Analysis and Design/Reinforcement | Steel bar selection. | |
734 | Concrete/Reports/Steel | Creates steel beams report. | |
|
| Steel/Reports/Steel |
|
|
| Reports/Steel |
|
735 | Structural Inspection/Design/Steel | Shows steel design in bending capacities (major axis) visualization dialog page. | |
736 | Structural Inspection/Design/Steel | Shows steel design in bending capacities (minor axis) visualization dialog page. | |
737 | Structural Inspection/Design/Steel | Shows steel design castellated beam ratios visualization dialog page. | |
738 | Concrete/Reports/Steel | Creates steel columns report. | |
|
| Steel/Reports/Steel | Creates steel columns report. |
|
| Reports/Steel | Creates steel columns report. |
739 | Steel/Steel/Columns | Draws steel column. | |
740 | Structural Inspection/Design/Steel | Shows steel design composite beam ratios visualization dialog page. | |
741 | Structural Inspection/Design/Steel | Shows steel design connection D/C ratios visualization dialog page. | |
742 | Structural Inspection/Output/Steel All Failures | Shows steel design out connection failures visualization dialog page. | |
743 | Structural Inspection/Output/Steel All Failures | Shows steel design out deflection failure visualization dialog page. | |
744 | Concrete/Create Drawings/Steel | Creates steel drawings. | |
|
| Steel/Create Drawings/Steel |
|
|
| Drawings/Create Drawings/Steel |
|
745 | Steel/Macro/Hand Rail | Creates steel hand rail on arc. | |
746 | Steel/Macro/Hand Rail | Creates steel hand rail on line. | |
747 | Steel/Steel/Purlin | Draws steel joist. | |
748 | Concrete/Design/Steel | Display steel joist design results. | |
|
| Steel/Design/Steel |
|
|
| Analysis and Design/Steel Design |
|
749 | Concrete/Reports/Steel | Creates steel joists report. | |
|
| Steel/Reports/Steel |
|
|
| Reports/Steel |
|
750 | Drawings/Tools | Opens steel numbering settings. | |
751 | Structural Inspection/Output/Steel All Failures | Shows steel design out pmm failure visualization dialog page. | |
752 | Structural Inspection/Design/Steel | Shows steel design pmm ratios visualization dialog page. | |
753 | Concrete/Reports/Steel | Creates steel purlins report. | |
|
| Steel/Reports/Steel |
|
|
| Reports/Steel |
|
754 | Concrete/Reports/Steel | Creates steel secondary beams report. | |
|
| Steel/Reports/Steel |
|
|
| Reports/Steel |
|
755 | Structural Inspection/Design/Steel | Shows steel design in shear capacities (major axis) visualization dialog page. | |
756 | Structural Inspection/Design/Steel | Shows steel design in shear capacities (Minor axis) visualization dialog page. | |
757 | Structural Inspection/Output/Steel All Failures | Shows steel design out shear failure visualization dialog page. | |
758 | Structural Inspection/Design/Steel | Shows steel design shear ratios (major axis) visualization dialog page. | |
759 | Structural Inspection/Design/Steel | Shows steel design shear ratios (minor axis) visualization dialog page. | |
760 | Steel/Steel/Purlin | Draws steel tie. | |
761 | Connection/Experimentals/Stiffened Shear Plate Connection | Creates a stiffened end plate connection. | |
762 | Connection/Experimentals | Creates a stiffened shear plate connection. | |
763 | Objects/Reinforcement | Draws stirrup. | |
|
| Drawings/Reinforcement |
|
764 | Settings/Project Settings | Arrange stories in the project. | |
765 | Concrete/Project Settings | Copies all entities from a story to another story. | |
|
| Steel/Project Settings |
|
|
| Tools/Edit |
|
|
| Drawings/Edit |
|
766 | Concrete/Reports | Prepares story forces report. | |
|
| Steel/Reports |
|
|
| Reports/Dynamic Analysis |
|
767 | Concrete/Project Settings | Display story list. | |
|
| Steel/Project Settings |
|
|
| Tools/Edit |
|
|
| View/Windows |
|
|
| Structural Inspection/View |
|
768 | Analysis and Design/Building | Opens story parameters. | |
769 | Concrete/Project Settings | Arrange stories in the project. | |
|
| Steel/Project Settings |
|
770 | Drawings/Modify | Stretch node. | |
771 | Concrete/Foundation | Draws multiple strip footings. | |
772 | Concrete/Reports/Concrete | Prepares strip footing general report. | |
|
| Steel/Reports/Concrete |
|
|
| Reports/Reports/Concrete |
|
773 | Concrete/Foundation/Strip | Opens strip footing settings. | |
774 | Concrete/Design/Concrete | Display the calculation results of the strip foundation and the selected reinforcements. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Concrete Design |
|
775 | Concrete/Create Drawings/Concrete | Prepares strip foundation drawings. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
776 | Analysis and Design/Design Parameters/Concrete | Opens strip foundation parameters. | |
777 | View/Mode | Enters structural design mode. | |
778 | Drawings/Tools/Section Line | Draws structural section line. | |
779 | Concrete/Analysis/Analysis Design | Performs risk analysis of the structure. | |
|
| Steel/Analysis/Analysis Design |
|
|
| Analysis and Design/Analysis/Analysis Design |
|
|
| Structural Inspection/Analysis/Analysis Design |
|
780 | Concrete/Reports/Concrete | Prepares structure summary report. | |
|
| Steel/Reports/Concrete |
|
|
| Reports/Summary |
|
781 | Objects/Roof | Draws a strut. | |
782 | Connection/Experimentals | Creates stub. | |
783 | Concrete/Concrete/Shearwall | Creates sub-basement shearwalls. | |
784 | Objects/Terrain | Draws sub region. | |
785 | Drawings/Window | Returns to last story window. | |
786 | Connection/Connection/Single Plate Connection | Creates a T plate connection. | |
787 | Structural Inspection/Input/Concrete | Shows concrete design in t-beam widths visualization dialog page. | |
788 | Concrete/Reports/Concrete/Structure Summary | Prepares TBDY 2018 seismic parameters report. | |
|
| Concrete/Reports/Concrete/Structure Summary |
|
789 | Reports/EQ Code | Generate non-structural element forces report. | |
790 | Reports/EQ Code | Generate seismic joint thickness report. | |
791 | Concrete/Reports/Steel | Creates wind loads report according to TS EN 1991-1-4. | |
|
| Concrete/Reports/Steel |
|
792 | View/Workplane | Creates a free workplane using existing objects. | |
793 | Drawings/Snap | Draws tangents. | |
794 | Tools/Import-Export/Export | Exports project to TEKLA software. | |
|
| ideCAD logo/Export |
|
795 | Objects/Terrain | Draws terrain polygon. | |
796 | Objects/Terrain/Terrain Polygon | Opens terrain settings. | |
797 | Drawings/Text | Draws text. | |
798 | Drawings/Text/Text | Opens font settings. | |
799 | Analysis and Design/Define/Load Case | Adds a new time history case. | |
800 | Analysis and Design/Define/Load Case | Adds a new time history function. | |
801 | Tip of the Day | ideCAD logo/Help | Shows tip of the day. |
802 | Right click menu | Switches between perspective and axonometric views. | |
803 | View/Window | Resizes the view to full screen. | |
804 | View/Perspective | Changes view to perspective. | |
805 | Concrete/Concrete | Transforms a slab to a ribbed slab. | |
|
| Modify/Entity Edit/Slab |
|
806 | Concrete/Concrete | Transforms a slab to a waffle slab. | |
|
| Modify/Entity Edit/Slab |
|
807 | Settings/Settings | Opens transparent story settings dialog. | |
808 | Steel/Macro/Truss | Draws Trapezoid Sloping Left Truss. | |
809 | Steel/Macro/Truss | Draws Trapezoid Sloping Right Truss. | |
810 | Steel/Macro/Truss | Draws Trapezoid Sloping Symmetric Truss. | |
811 | Steel/Macro/Truss | Draws Trapezoid Slopping Asymmetric Truss. | |
812 | Steel/Macro/Truss | Draws Trapezoid Type 1 Truss. | |
813 | Steel/Macro/Truss | Draws Trapezoid Type 2 Truss. | |
814 | Steel/Macro/Truss | Draws Trapezoid Vault Truss. | |
815 | Modify/Add Load | Adds trapezoidal load. | |
816 | Steel/Macro/Truss | Draws Triangular Asymmetric Truss. | |
817 | Steel/Macro/Truss | Draws Triangular Sloping Left Truss. | |
818 | Steel/Macro/Truss | Draws Triangular Sloping Right Truss. | |
819 | Steel/Macro/Truss | Draws Triangular Symmetric Truss. | |
820 | Drawings/Modify | Line cuts primitive objects such as arcs to another line or arc. | |
821 | Modify/Entity Edit/Column | Trims column edges with an axis or beam. | |
822 | Objects/Roof | Draws a trimmer. | |
823 | Steel/Macro | Draws Custom Truss. | |
824 | Concrete/Design/Concrete | Display truss design results. | |
|
| Steel/Design/Steel |
|
|
| Analysis and Design/Steel Design |
|
825 | Concrete/Reports/Steel | Creates truss report. | |
|
| Steel/Reports/Steel |
|
|
| Reports/Steel |
|
826 | Connection/Experimentals/Seating Support Connection | Creates a truss connection. | |
827 | Concrete/Create Drawings/Steel | Draws steel truss. | |
|
| Steel/Create Drawings/Steel |
|
|
| Drawings/Create Drawings/Steel |
|
828 | Connection/Experimentals/Simple Base Plate | Creates a tube base plate connection. | |
829 | Tools/Edit | Undo. | |
830 | Modify/Add Load | Adds uniform area load. | |
831 | Modify/Add Load | Adds unifom load. | |
832 | Connection/Connection/Single Plate Connection | Creates an unstiffened seated connection. | |
833 | Drawings/Layout Design/Create New Layout | Updates linked layout blocks. | |
834 | It is located in the library toolbar. | Update library elevation. | |
835 | It is located in the ODT door/window toolbar. | Use distance. | |
836 | It is located in the ODT door/window toolbar. | Use dio as reference. | |
837 | Drawings/Hatch | Draws user defined hatch. | |
838 | Concrete/Structural Inspection/Wall | Shows user loads visualization dialog page. | |
|
| Steel/Structural Inspection/Wall |
|
|
| Structural Inspection/Loads/Wall |
|
839 | Objects/Roof | Draws vault. | |
840 | Steel/Macro/Truss | Draws vault truss. | |
841 | Objects/Roof/Vault | Opens vault settings. | |
842 | View/Workplane/Target Workplane | Creates a vertical workplane. | |
843 | Settings/Settings | Opens view settings. | |
844 | View/Window | Display view configuration options. | |
845 | Concrete/Create Drawings/Concrete | Preapares waffle drawings. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
846 | Concrete/Reports/Concrete/Slab | Prepares waffle slab general report. | |
847 | Concrete/Design/Concrete | Display the calculation results of the waffle slab and the selected reinforcements. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Concrete Design |
|
|
| Steel/Reports/Concrete/Slab |
|
|
| Reports/Slab/Slab |
|
848 | Concrete/Wall | Draws wall. | |
849 | Concrete/Structural Inspection | Shows wall loads visualization dialog page. | |
|
| Steel/Structural Inspection |
|
|
| Structural Inspection/Loads |
|
850 | Structural Inspection/Input | Shows concrete design in wall loads visualization dialog page. | |
851 | Structural Inspection/Input/Steel | Shows steel design in wall loads visualization dialog page. | |
852 | Concrete/Wall/Wall | Opens wall settings. | |
853 | Concrete/Design/Steel | Define weld electrodes. | |
|
| Steel/Design/Steel |
|
|
| Analysis and Design/Design Parameters/Steel |
|
854 | Connection/Experimentals/Welded Connection | Creates a welded box/tube connection. | |
855 | Connection/Experimentals | Creates Welded Connection. | |
856 | Connection/Connection/Bolted Flange Plate Connection | Creates a welded flange plate connection. | |
857 | Connection/Connection/Bolted Flange Plate Connection | Creates a welded web connection. | |
858 | Concrete/Foundation | Draws well foundations. | |
859 | Concrete/Design/Concrete | Display the calculation results of the well foundation and the selected reinforcements. | |
|
| Steel/Design/Concrete |
|
|
| Analysis and Design/Concrete Design |
|
860 | Concrete/Reports/Concrete | Preapares well foundation report. | |
|
| Steel/Reports/Concrete |
|
|
| Reports/Foundations |
|
861 | Concrete/Analysis/Analysis Design | Performs well foundation analysis. | |
|
| Steel/Analysis/Analysis Design |
|
|
| Analysis and Design/Analysis/Analysis Design |
|
|
| Structural Inspection/Analysis/Analysis Design |
|
862 | Concrete/Create Drawings/Concrete | Preapares well foundation drawings. | |
|
| Steel/Create Drawings/Concrete |
|
|
| Drawings/Create Drawings/Concrete |
|
863 | Analysis and Design/Design Parameters/Concrete | Opens well foundation concrete settings. | |
864 | Connection/Experimentals | Creates a wind connection. | |
865 | Concrete/Structural Inspection/Wall | Shows wind loads visualization dialog page. | |
|
| Steel/Structural Inspection/Wall |
|
|
| Structural Inspection/Loads/Wall |
|
866 | Coordinate Box | Enters the X coordinate box. X coordinate is entered. | |
867 | Coordinate Box | Enters the Y coordinate box. Y coordinate is entered. | |
868 | View/Zoom | Zooms the window. | |
869 | View/Zoom | Zooms to the extents of the drawings. | |
870 | View/Zoom | Zoom selection. | |
871 | View/Zoom | Zoom into a rectangular window. | |
872 | Keyboard | Zooms in. | |
873 | Keyboard | Zooms out. |
Next Topic